Top 20 Linksys WRT54GX2 Wireless-G Broadband Router with SRX200 (LS-WRT54G2) Questions & Answers

The Linksys adapter should have a program you open to find and connect to your router. If not, you can use the Windows Network settings to find your router and connect. Although 54G is a slower speed, they should still connect.

Linksys Wireless-G WRT54G Router istallation

http://www.dd-wrt.com/wiki/index.php/Linksys_WRT54G2 Has everything you need. If you have a specific problem let us know the details.

Are you looking for wireless network password or the router password.The default linksys router password is admn.If you are looking for the wireless network password then you will need to access the setup page of the router.See How to find wireless network key.See Video: How to find wireless network key.

Open the router setup page with address 192.168.1.1 Username =nothing leave this blank and password is ADMIN and then go to the wireless security settings. Select WEP or WPA enter the password and save the settings. Reboot the router after that and now your wireless signal is password protected Wireless Security

Resetting the Linksys Router to Factory Default
To reset the router to its default settings, press and hold the Reset button located at the back of the router for 10 seconds.
IMPORTANT: Older Linksys devices may require pressing and holding the Reset button for 30 seconds to complete the reset process.

To perform hard reset on your Linksys router, follow the steps below:
NOTE: The location of the Reset button may vary for every model.
If the normal reset does not work, unplug and re-plug the router's power adapter while pressing the Reset button.
You can also reset the router via its web-based setup page. Follow the steps below to learn how.
Resetting the Router Using the Web-Based Setup Page
Step 1:
Access the router's web-based setup page. To learn how, click here.

NOTE: To learn how to access the web-based setup page on a Mac computer, click here.

Step 2:
Click the Administration tab then click on the Factory Defaults sub-tab.

NOTE: If the screen on your router's web-based setup page is different, click here.

Step 3:
Under the Factory Defaults section, click on the Restore Factory Defaults button.

The default settings of your router are now restored.

Yes or a laptop to initially access the setup page of the router.

yes its fixable, you can program back the wireless modem, by holding down to the power button and the restart after ok

Please login to router page by 192.168.1.1 enter user name = blank and password = admin Once you click on the wireless tab>wireless security Under this you can check the wireless key. please follow the link. Wireless Security

Hello nanpw,
To reset your router to factory, take a paper clip and press the reset button. Hold it for about 30 seconds or until the lights on the router flash. open a web browser and type 192.168.1.1 username is (blank) password is admin then run the wireless setup utility, after your laptop is connected its always a good idea to include security.

Try to reset with a 'Power Reset':

1. Pull the power from the router for 30-60 seconds and reconnect the power.
2. Check again.

If this does not help, the (1) powersupply or the (2) router may be faulty.

Hi

If you have an internet connection using the ethernet cable but not on the wireless and there is an orange light blinking.. Try to reset the router by pressing the reset button located on the back or on the location were you can twist the stand for the router. press it for about 10secs and that will return the router on a factory settings. before u reset the router make sure to acces the configuration for the internet settings of your isp provider. if the orange light still there, try to download the latest firmware of your router on linksys site and that should fix the problem

please try this

http://homedownloads.cisco.com/downloads/setupwizard/1224638364507/WRT54GX2_Setup_Wizard_v1.5.zip

hope this helps to you

Correct, put a pin in the reset and hold it for 30 seconds. User name is blank, and password is admin.

if that does not work try user name "admin" password "admin"

If you do not have the CD. Down load software from here

http://downloads.linksysbycisco.com/downloads/setupwizard/1224638364507/WRT54GX2_Setup_Wizard_v1.5.zip

If the wireless light on the router is not coming ON that is a sign of something is wrong with the router settings or with the router itself.

First thing that you can do here to correct the problem is to do a reset on the router, To reset the router using a paper clip or pen press and hold the reset button of the router for 10 seconds while power is ON and then once done let go the reset button and unplug replug the power of the riuter then check now is the wireless light is back ON , if the light for wireless is back on you can now continue an reconfigure the router.

But after the reset and still nto able to bring the wireless light back ON your next step here is to do a firmware upgrade on the router. You can follow these step by step procedure from this link , just click HERE and then follow the steps to upgrade the firmware of the router.

Try using userTry using the username admin and password also admin. This is the default setting. If that doesnt work you may need to reset the router by pushing the small button at the back of the router and then use the admin, admin to login.
Hope this helps. Good Luck.
~SmokinJoe~

Good day,

Here' s the link below just select downloads tab and choos your hardware version.
after selecting the hardware version , click the download link.

Download

THE INTERNET LINK WAS NOT THERE. CHECK THE LINK WHETHER IT IS WORKING OR NOT