20 Most Recent Philips DGX320B USB Laptop Travel Speakers with Case Computer Speakers Questions & Answers

1. Restart the computer.
2. Press the "F8" key after the computer reboots but before the "Windows" logo appears on the screen. You should now see the "Advanced Boot" menu.
3. Scroll down through the menu options using the down arrow key. Stop when "Repair Your Computer" is highlighted and hit the "Enter" key.
4. Select the language you wish to use and press the "Enter" key.
5. Type in the computer's administrator ID and password. Press the "Enter" key.
6. Scroll through the options using the down arrow key. Choose "Restore (name of computer manufacturer) Settings." Press the "Enter" key.
7. Choose "Yes" when asked if you want to reformat the hard drive.
8. Press the "Enter" key to begin the reformatting process. The process takes a few minutes, so be patient. Do not turn off the computer or attempt to stop the process after it has begun, or this may result in major damage to the hard drive.
9. Choose "Finish" and press the "Enter" key to restart the computer. The computer will restart with the original factory settings.


Have a great day,

Bhautesh

Dear Sir/madam,


I want additional information regarding your driver for laptop. If u install belarc advisor software to detect what type of drivers, co. name, model no., manufacture details all those detected this software. click this link http://www.belarc.com/free_download.html

This can be help to getting the drivers in internet.. send me the details to me...
[email protected]

thanks

Thats strange that the email client "Outlook" express changing on you or is it some other Client you are using.. I did a google search about your laptop and its quite a stunning laptop. I dont think you need any updates but you need to check to see if your windows updates are frequent they help alot. Your keyboard may need cleaning ie under they keys there could be a sticky one causing your problem. I wish I was sitting in the front of this machine...........software are no problems they need to know you are the master after all your one thats using it. If you still have problems ....place the install WINXP disc in the CD rom drive switch off switch on and let the disc go right through the end then press "R" for console type chkdsk on the command line and let Windows fix any problems when it finishes take out the disc and start normal see what happens. If it still does the same theres a virus lurking?

The system must run through its routine before it can start up. If a mechanism is jammed or a switch is not contacting, it won't complete its routine and therefore will not start up.

Question edited for clarity. It you have standby, that shows you have power. The only things you can try is a Power Reset, disconnect from the mains, for 10 minutes. Press and hold the power button for 60 seconds and then plug back in. If you are using a remote, check the batteries in the remote. You can also do the check to make sure the remote is putting out a signal. Aim the remote at the front facing selfie of a smartphone. You should see a flash. No one else has reported your issue. https://www.google.com/search?q=Philips+fr-968+radio+receiver+no+sound+or+display ..

There doesn't seem to be one for this chinesium speaker.Probably a throw away item and not serviceable.

The skipping problem you are experiencing may be related to the shaft that the laser assy rides on. It may need a little greasing with silicon grease, just a litte bit. Or it could be the spindle motor is wobbling as it turns. If you are a little tech savy, then you can order a new CD drive assy through Ebay and swap it out when it arrives. If you get this far you need to know how to remove the solder short on the new assy otherwise the new drive will not work.

The Philips iPod dock model "AJ300D/05" is not responding when plugged in. To troubleshoot:

1. Check the power source and ensure proper connection.
2. If applicable, look for any blown fuses as a potential issue.
3. Verify the dock connector for a secure connection with the device.
4. Confirm device compatibility and consider using adapters if needed.
5. Check the remote control and its batteries.
6. Look for a reset function if available.
7. Update any associated software.
8. Inspect for physical damage.

If none of these steps resolve the issue, reach out to Philips customer support or a professional technician for further assistance or potential repair.

If your Philips CDR820 is not copying a disc when you press the "copy cd" button and then the "yes" button, there could be several reasons why this is happening. Here are some possible solutions you can try:

1. Check the disc: Make sure the disc you are trying to copy is not scratched, dirty, or damaged. If it is, try using a different disc.
2. Check the blank disc: Make sure the blank disc you are using is compatible with your Philips CDR820. Check the user manual for compatible disc formats.
3. Clean the laser lens: If the laser lens is dirty, it may not be able to read the disc properly. Use a cleaning disc to clean the lens.
4. Update the firmware: Check if there is an available firmware update for your Philips CDR820. If there is, download and install it to see if it fixes the issue.
5. Reset the device: Try resetting the device by unplugging it from the power source for a few minutes, then plugging it back in and trying to copy a disc again.

If none of these solutions work, it may be a hardware issue that requires professional repair. In that case, you may need to contact Philips customer support or a qualified technician for assistance.

It could be due to a blown fuse and the fuse that has blown needs to be replaced.Or it could of had stopped working.

Contact Philips direct. They probably have drivers and a Firmware / Software Bin File. https://www.p4c.philips.com/cgi-bin/dcbint/cpindex.pl?slg=en&scy=gr&ctn=SA1942/02 ..

possible bad drive motor

I need a circuit diagram for Philips Radio Model B4CA49T 1965 model can anyone suggest me where can I get it

Ask Philips: http://www.support.philips.com/support/contact/contact_page.jsp?userCountry=ca&userLanguage=en

Yes it can. contact Philips Support for their local service centre. https://www.philips.com.ph/c-p/LX3600D_69/- ..

TRY USING A CLEANING DISK , IF IT DOESN'T HELP THEN A LOCAL REPAIR SHOP

If your new tapes squeak while recording, there could be misalignment in the record path or it could be worn. Curious that no tapes were supplied with the machine. Perhaps you can take the machine to the vendor to demonstrate operation with squeaking.

many older units will not work for digital signals

I have a service manual pdf there isn't any way to attach it to this message. Give me your email address and I'll send it to you. Or if you have some other way to send it electronically we can do that.