20 Most Recent
Broksonic CTGV-5463TCT TV Questions & Answers
TV won't tune above channel 12?
Main system control memory IC fault. This is a very small IC; have 8 solder terminals, and can be located very near to the main system control-chroma IC. Check and replace it. Be sure to replace it with the same number printed on it; in all respect. Otherwise, it won't go.
http://electronicshelponline.blogspot.com/ Before replacing it, try a reset to this set, and then check.
There are two methods to reset TVs. The first is simple to do; a Hard Reset. The other is somewhat skilled; is a Factory Reset (System Reset). To make it a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. If you do this by overnight is better. This procedure will make it a hard reset. If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option. If you wish to get some details; check the site linked here.
4/15/2017 11:27:52 PM •
Broksonic...
•
Answered
on Apr 15, 2017
Ctgv-5463D
Check if using the cable via the coax fitting on the set that the fitting or the cable wire are not loose------its possible the tuner is bad but look also for video/audio input jacks on the set (some have, some not) If have those connect a DVD etc and see if problem that way.....
10/30/2012 2:46:41 PM •
Broksonic...
•
Answered
on Oct 30, 2012
Tv screen turned purple
Check the video output card for any loose soldering, or component damage. Absence of Green color is the problem.
Visit the site named 'Electro-help' for
more details. Click this link. View it in
"Timeslide" option, which can be selected from the drop down box
menu by the [Sidebar] tag, at the top left corner of the display
window. It will make search easy. There
are more than 1000 posts to different brand TVs now. Pull up older posts there.
10/22/2012 5:18:58 PM •
Broksonic...
•
Answered
on Oct 22, 2012
How can i fix my tv that has fallen?
set must be opened (unplug it first) and main board/s examined to see if they are cracked or damaged.extent of damage will determine if fixable or not.
3/24/2012 3:58:05 PM •
Broksonic...
•
Answered
on Mar 24, 2012
Remote control does not work on my TV. How do I
Hello
What is your need. It is not clear from your post. Which remote do you want to programe with your Broksonic TV? Is it a universal remote control, or it orginal remote control handset.? If universal remote control, which brand do you owns?. Please provide these details through Fixya. OK.
2/14/2011 2:05:03 PM •
Broksonic...
•
Answered
on Feb 14, 2011
This tv will not go
Hello; A lot of sets are designed not to go to a certain input, unless a device is actually plugged into that particular input. This may or may not help. John
12/21/2010 12:18:11 AM •
Broksonic...
•
Answered
on Dec 21, 2010
My tv when i try to turn it on doesnt come on it
Possible that the TV is having some dry soldering in the power supply sections or in the processor sections in the main board.
It will be good to remove the power plug and check all the leads, the connectors and the PCB for signs of dry soldering.
If so use a good iron and do the soldering of the suspected joints , check also the processor pins.
If not you will need to check for shorted components in the main board , check continuity , check the voltage from the power supply to the main board.
12/4/2010 7:18:54 AM •
Broksonic...
•
Answered
on Dec 04, 2010
Not finding what you are looking for?
