20 Most Recent Gateway GT5428 PC Desktop Questions & Answers


What graphics card do I upgrade for my Gateway GT5428? This trouble maybe power supply or inverter boards is defective.
first you can test the voltage of the multr,and then check which part is defective.From Wisiny.com can find those parts
if you have any question,please let us know email:[email protected],we sincerely hope we can help you!
you can also check this boards whether suit you:
2940073400 Dell ADP 30EPJ Power Supply Backlight Inverter

Gateway GT5428... | Answered on Dec 19, 2014


The GT5428 does not have wireless installed unless someone put a wireless card or adapter. If you do have a card or adapter, try calling the manufacturer of the product. If you do not have a card or adapter I would recommend buy a wireless card from Best Buy or Radio Shack

Gateway GT5428... | Answered on Dec 30, 2011


I believe that is a pci express slot (x1)

Here is the manual for your motherboard:

http://www.intel.com/support/motherboards/desktop/d845gvsr/sb/cs-008823.htm

Gateway GT5428... | Answered on Dec 25, 2011


maybe you should open the casing to clean it up to prevent
the air circular blocked.

Fan spin high is kinda build in protection of overheating of CPU.

Gateway GT5428... | Answered on Mar 11, 2011


You must be a NetFlix subscriber.

1.Then click on this link http://www.microsoft.com/windows/windows-media-center/netflix.aspx to download NetFlix for Windows Media Center.
2. Open the Windows Media Center
3. Click on Task
4. Click on General
5. Click on Automatic Download Option
6. Configure the time
7. Click on Download Now, to download the latest guide listing
8. You can now select on the videos you like to view.

Gateway GT5428... | Answered on Mar 01, 2011


Hello Erik,

Are you absolutely certain that the new module is compatible with your system? Go into the BIOS and see if it is recognized there.

Crucial shows that your computer takes DDR2 memory with support for DDR2 PC2-5300, DDR2 PC2-6400 speeds.

Make sure it is not ECC memory. ECC is not compatible.

If you are sure of the compatibility, I would try to install the old one by itself first and make sure the system boots. Then I would remove the old one and install the new one by itself. Try booting. If it doesn't work, you may have gotten a bad module. (It happens.)

Just FYI, here is the crucial link for your computer:

http://www.crucial.com/store/listparts.aspx?model=GT5428

Thanks for using Fixya.

Gateway GT5428... | Answered on Feb 27, 2011


Look for a small pinhole just under the tray door. This is the manual release for the dvd tray.

Just insert a long needle like object into the hole about 2 or 3 inches and push.

This should pop out the tray.
You should then be able to remove the shattered pieces of disk. If the drive tray does not function normally after removing the disk pieces you may have to remove the drive entiirely from the case in order to shake out the smaller bits. If the problem persists after that, you may have to remove the metal case from the drive itself and clean it out or it may just be time for a new drive.

Good luck and please comment back if this was helpful and with how you make out.

Gateway GT5428... | Answered on Jan 30, 2011


alright when your computers Boots up it tells you several options such as F2 or F12 when you press this another menu should come up you need to change the way your computers boots up isntead of the harddrive put the CD/DVD rom FIRsT than the rest save and exit your windows 7 disk should be already IN!!! than it will load the little dot will be loading than it will tell you to boot from the disk press any key! press whatever and it will take you to WINdOWS 7!!! i hope this helps you and please leave positive feedback!!

Gateway GT5428... | Answered on Jan 17, 2011


The Gateway GT5428 does not have a wireless card installed but has a provision of two PCI slots which can be used to install a wireless adapter.

Gateway GT5428... | Answered on Jan 17, 2011


hello..

  • Here are a couple relevant articles:

    http://support.microsoft.com/kb/314060

    http://www.cdr-zone.com/forum/about4719.html

    Basically, you're dealing with mixed filter configurations, some of which can can conflict. The most egregious example is packet-burning software, i.e. burning apps which behave like a floppy. For example, XP's built-in burning, DirectCD, InCD, etc. Or software conflicts between burning apps: e.g. Roxio/Nero, Nero/RecordNow, etc.

    If you back up your registry first, and carefully follow directions, it is safe to delete the filters. NOTE: You may have to uninstall/re-install your burning programs, and for goodness sake, don't install any packet-burning apps. Also, resist the temptation to install multiple burning programs.

    Good luck
If it's useful for you means plz rate me the 4 Thumbs ....

Gateway GT5428... | Answered on Jan 06, 2011


Have you called gateway

Gateway GT5428... | Answered on Dec 09, 2010


please remove the ram card and clean the contact of the card with an eraser.

Gateway GT5428... | Answered on Oct 14, 2010


you can check this website

http://support.gateway.com/s/CASES/GERSHWIN/3507057Riv.shtml

as it says there you got Two 5.25-inch drive bays. that means that you can put in a 2nd Optical Drive.

Gateway GT5428... | Answered on Sep 13, 2010


This is Gateway Support, and Support Documents for the Gateway GT5428 Desktop PC,

http://support.gateway.com/s/pc/R/1009466/1009466nv.shtml

On this page left-click on Components.

Scroll down the page to the heading - Motherboards
Left-click on -
4006158R - Intel (Coryville) 945G Motherboard

Now Left-click on - Product Views
Lastly left-click on -
O - Front Panel Connector

This shows you a photo of the Front Panel header on the motherboard.

A connection on a motherboard is referred to as a Header.

The Front Panel of your computer is the plastic part where the Power On button is.

The Front Panel header on the motherboard is where the wires from the Front Panel connect to.

The above is not to offend you, or insult your intelligence. Just wanted to give you the exact names of the parts you'll be handling.

Looking at your motherboard with the Processor to the top, and the Ram slots to the right, the Front panel header is located in the very bottom right corner.

Looking at the Front Panel header on the motherboard, you will note the different colors.

There are also Pins that stick up out of the Front Panel header.

Every 2 pins is grouped into one color.

The Front Panel header is located parallel to the outside edge of the motherboard.
There are 2 rows of pins.

One row across the top of 5 pins.
One row across the bottom of 5 pins.

The pins are numbered, as well as grouped into colors.

Starting at the Right side, going towards the Left, on the Top row;
Pins 1, 3, 5, 7, and 9

Starting at the Right side, going towards the Left, on the Bottom row;
Pins 2, 4, 6, 8, and 10.

Pins 1 and 3 ( Yellow ) are for the Harddrive Activity LED.
The light in the front panel that flashes when the harddrive is actively being used.

Pins 2 and 4 ( Green ) are for the Power On LED.
The light in the front of the computer that shows when the computer is on.

Pins 5 and 7 ( Blue ) are for the Reset switch.
The Reset button on the front of the computer, IF, the computer came with one.

Pins 6 and 8 ( Red ) are for the Power On switch.
The Power On button on the front of the computer.

Pin 9 (Black) is for the +5 Volt power

Pin 10 is not used. (Not connected)

The reason I took you the long way, and did not just provide a link to the Front Panel header, is in case you need more information about your computer.

This way you'll have it.

Gateway GT5428... | Answered on Feb 26, 2010


Hi,
On the motherboard the pinouts on the front panel should be colour coded, and marked with letters like in this picture >>>>>
ce10baf.jpg

The connectors are also marked corresponding to where the connect on the motherboard, like in this picture >>>>>>
66ce2fc.jpg

If the board is not colour coded then the motherboard will marked with the same letters, you may need a strong light to see the marks.

Regards.

Gateway GT5428... | Answered on Feb 22, 2010


It could be one of several things.
try opening the computer up and blowing some air all around the the CPU and Video chips if they aren't cooling down that can cause a shut down. Make sur eyou touch the outside of the case and anything you put inside does the same as well before going in.
Your fan may be bad do you hear it come on?
You may have a software issue or yes it may be your SMPS.


Gateway GT5428... | Answered on Feb 03, 2010


you could try booting into safe mode, (tapping F8 during bootup) and you might have Administrator on the logon screen if not, try hitting ctrl alt delete twice on the logo screen to get an old style logon screen,
type administrator as the username.
you can change your password in control pannel as usual

Gateway GT5428... | Answered on Dec 06, 2009


What do you mean it wont go directly to your desktop? Does it eventually reach your desktop? Also, what do you mean that you're modem is on, how do you know this? Is it an external modem or an internal modem? This could be something as simple as replacing the monitor or replacing the operating system or something more complex like the video card or the motherboard....

Gateway GT5428... | Answered on Sep 25, 2009

Not finding what you are looking for?
Gateway GT5428 PC Desktop Logo

Popular Tags

40 questions posted

Ask a Question

Usually answered in minutes!

Top Gateway Computers & Internet Experts

Ekse

Level 3 Expert

13434 Answers

Prashant M
Prashant M

Level 3 Expert

2277 Answers

Thomas F. Schneider

Level 3 Expert

2715 Answers

Are you a Gateway Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Gateway Computers & Internet

  • Gateway Computers & Internet

Most Popular Question

get

  • Computers & Internet
Loading...