20 Most Recent Denon AVR-787 Questions & Answers

1 Answer

How to hook up Denon 787 2 smart TV

https://usa.denon.com/us/product/hometheater/receivers/avr787

Denon AVR-787 | Answered on Oct 03, 2019

1 Answer

Trying to hook up Denon AVR 787 to smart TV

https://usa.denon.com/us/product/hometheater/receivers/avr787
+++

Denon AVR-787 | Answered on Oct 03, 2019

0 Answers

This is an indication that there is an overload problem in the output section of the amplifier. The overload could be thermal or electrical The overload circuit has built-in protection to help keep the amp from burning itself out. disconnect all speakers and cables from the unit and power it up. If the problem still exists, it is internal and will need to be repaired bya professional technician. If the problem goes away, check for shorted, crossed wires to your external speakers. Try different wires and speakers.
Hope this helps.

Denon AVR-787 | Answered on Feb 10, 2011

1 Answer

I have a Denon

Sure it does:

http://www.retrevo.com/support/Denon-AVR-391-Receivers-manual/id/23705bh449/t/2/

Analog RCA cables go to anything available: DVD; SAT/CBL; DOCK
and/or
Digital audio goes to whatever is available: COAXIAL (SAT/CBL) or OPTICAL(TV)

Denon AVR-787 | Answered on Jan 09, 2011

1 Answer

We have our subwoofer hooked up to our Denon

press setup/configuration on your remote you'll get configuration menu, then goto 'speaker configuration' check if the subwoofer is on, check that front speakers and others are set as small. There also could be subwoofer mode settings, remember current setting and try to change it.

Denon AVR-787 | Answered on Jan 08, 2011

0 Answers

How do I set up/hook-up the speakers on this

Denon AVR-787 | Posted on Dec 02, 2010 | Be the first to answer

1 Answer

No sound from speakers

Try using your headphone, if the sound comes out, it means no problem with the pre-amp, then the problem is power output

Denon AVR-787 | Answered on Jul 02, 2010

1 Answer

Hook up question

make sure on the ps3 you have the audio output setting to the optical wire and not the hdmi. im not sure about the xbox

Denon AVR-787 | Answered on Jun 10, 2010

2 Answers

Getting out of protect mode

most of the receivers come with a cooling fan inside see if its working they usually work when you turn the volume up,, if its working that means you are playing it to loud if you lower the volume a little it will play just fine..( if the fan inside is not working thats the reason it goes into protect mode and it means you must have it repaired,, it goes into protect mode to prevent furter damage to the unit or the speakers,,

Denon AVR-787 | Answered on Apr 10, 2010

0 Answers

I have a denon DCM-360 still working --but certain discs it does not recognize --these are CDs I just bought from amazon, still sealed (Dutton label).

Denon Audio... | Posted Yesterday | Be the first to answer

0 Answers

Avr 1600RD. How can I reset?

Denon Audio... | Posted on Jan 16, 2021 | Be the first to answer

1 Answer

I have a Denon AVR-3200G Amplifier. There is no sound from the center speaker and the Subwofer.

Check the speaker wires and connections.

Denon Audio... | Answered on Jan 04, 2021

1 Answer

My Denon DRR 6.5 has suddenly stopped working, is there any way I can fix this myself?

SAD TO SAY BUT UNLESS YOU HAVE TRAINING IN ELECTRONICS I DOUBT YOU CAN FIX IT

Denon Audio... | Answered on Nov 14, 2020

1 Answer

I can't get my Denon dra 37 receiver to power on.. absolutely no power.. what do I do?

- check power cord
- check main fuse

https://www.manualslib.com/manual/910410/Denon-Dra-397.html?page=1#manual

Denon Audio... | Answered on Nov 14, 2020

1 Answer

How to reset denon AVR-X2300W ?

Power off using the power button and press together TUNER PRESET CH + and TUNER PRESET CH. Remove fingers when Initialized appears on the screen. It will reset the Denon AVR-X2300W.

Denon Audio... | Answered on Nov 09, 2020

3 Answers

Mcs 160 subwoofer no power

I had the same problem with my subwoofer unit. I found the zener diode ZD3 was fried. The pic below shows the diode and its clearly tagged ZD3. You need a multimeter to check this before you order anything. This diode should only transmit power in one direction. Its size and spec is 18v .5w zener diode. (that's 1/2 w) It's very inexpensive and the whole repair took about an hour. This is from a Boston Acoustics subwoofer MCS 160
Ok..the procedure is easy.
1) unplug the unit and bring it to a well lit work area.
2) remove the panel from the back and locate the board that is held to the panel by 4 screws and has the ZD3 diode. The pic below shows the diode at the end of my test lead. Note the direction of this part and reinstall the new one in the same direction. Its a simple de-solder and re-solder project. I elevated the new diode about 1/8 " from the board with a small strip of copper. This acted as a heat sink during the soldering and elevated the part above the board to help it dissipate heat later when in use.
3) re-install the board and plug in all the connections.
4) this worked for me and I'm enjoying my sound system again!..good luck