20 Most Recent
Tvone TV-207 Television - Page 8 Questions & Answers
Rowe R-81 box and the arm will not swing over to play the record any ideas Thanks Tom
If your Rowe R-81 jukebox arm is not swinging over to play the record, here are a few things you can try:
- Check the power: Make sure the jukebox is plugged in and turned on. If it's not getting power, the arm won't be able to move.
- Check for mechanical obstructions: Check the mechanism that swings the arm over to make sure there are no obstructions blocking its movement. This could be something as simple as a piece of debris or dust, or it could be a more serious mechanical issue.
- Lubricate the mechanism: Over time, the mechanism that swings the arm can become stiff and difficult to move. Try lubricating the mechanism with a small amount of oil or grease to see if that helps.
- Check the belt: The mechanism that moves the arm may be driven by a belt, which can wear out or break over time. Check the belt to see if it's intact and properly tensioned. If it's worn or broken, it will need to be replaced.
- Seek professional assistance: If none of these steps work, it may be necessary to seek professional assistance. Jukeboxes can be complex machines, and attempting to repair them yourself could cause further damage. Consider contacting a professional jukebox repair service or a manufacturer's representative for assistance.
Rdr-gx257 says no title after recording
If your Sony RDR-GX257 DVD recorder says "no title" after recording, it could be due to a few different issues.
One possibility is that the disc was not finalized after recording, which can cause playback issues on other devices. To finalize the disc, you will need to access the disc menu on the DVD recorder and select the "finalize" option.
Another possibility is that the disc was not recorded properly, which can cause the "no title" error to appear. This can be caused by a variety of factors, including a dirty or damaged disc, a malfunctioning recorder, or incorrect settings on the recorder.
If you continue to experience issues after finalizing the disc and checking the recording settings, it may be necessary to seek assistance from a qualified technician or contact Sony customer support for further assistance.
Change picture size firetv
To change the picture size on Fire TV, follow these steps:
- Go to the Settings menu on your Fire TV.
- Select "Display & Sounds" or "Display & Sound" (depending on your Fire TV version).
- Scroll down to the "Display" section and select "Calibrate Display".
- Choose the option that matches the aspect ratio of your TV (e.g. 16:9 for most modern widescreen TVs).
- Follow the on-screen instructions to adjust the picture size and position until it fits your screen properly.
- Once you're satisfied with the changes, select "Save" to apply the new settings.
Alternatively, you can also adjust the picture size and zoom level directly from the video playback screen. While watching a video, press the "Options" button on your Fire TV remote and select "Picture Size" or "Zoom" to adjust the settings.
Note that the exact steps and menu options may vary depending on your Fire TV version and software version.
My Bruhm 32 curve tv is stuck in usb mode, and i dont have remote
If your Bruhm 32-inch curved TV is stuck in USB mode and you don't have a remote, there are a few different things you can try:
- Try using the buttons on the TV itself: Some TVs have buttons on the side or bottom of the screen that can be used to navigate menus and settings. Look for buttons labeled "menu," "input," or "source" and see if you can use them to switch to a different input or exit USB mode.
- Unplug the TV: Unplug the TV from the wall outlet for a few minutes, then plug it back in and turn it on. This can sometimes reset the TV and clear any issues with the USB mode.
- Obtain a replacement remote: If you don't have a remote, you may need to purchase a replacement. Check with the manufacturer or a retailer that sells Bruhm TVs to find a compatible remote.
- Use a universal remote: If you have a universal remote, you may be able to program it to work with your Bruhm TV. Consult the manual for your universal remote or contact the manufacturer for assistance in programming the remote.
If none of these steps work, you may need to contact Bruhm customer support for further assistance.
A220z1H01_Lcd right vartical barrs problem
It seems that you are experiencing an issue with vertical bars on your LCD screen. This problem can be caused by various factors, including hardware issues or software glitches.
Here are some steps you can try to troubleshoot and resolve the issue:
- Check the cables: Make sure that all cables connecting the LCD to the computer are securely attached and not damaged. Try disconnecting and reconnecting them to ensure a proper connection.
- Update drivers: Ensure that your graphics card drivers are up-to-date. You can check for driver updates on the manufacturer's website.
- Run a diagnostic test: Many LCD screens come with built-in diagnostic tests. You can run these tests to identify any hardware problems that may be causing the issue.
- Check for software issues: Try booting the computer in safe mode to determine if any software conflicts are causing the problem. If the bars disappear in safe mode, you may need to uninstall any recently installed software or update your operating system.
- Consider professional repair: If none of the above steps resolve the issue, it may be necessary to take your LCD to a professional repair service for further diagnosis and repair.
I hope these steps help you resolve the problem with your LCD screen.
Tv is displaying a white screen.
If the TV's clock is unable to match the internet's server.The TV can't download pictures and a white screen will show up instead.
I have an Olin HVBT-4100S Set Top Decoder.
Try doing a factory reset on it to reload the software and channels. This is from a different Olin model, but is worth a try.
Restore Factory Defaults
*WARNING* Restoring Factory Defaults will remove all saved channel information and settings.
All Scheduled recordings will be deleted. Please use with care.
Press the OK button to begin and then enter the password.
Press the OK button to confirm.
OR press the EXIT button to return to the previous screen without Restoring Defaults.
Another possibility is that you have inadvertently set it to show HD Channels only instead of All Channels. You could try disconnecting from the mains supply for 5 minutes and plug it back in, a SOFT Reset. More here
My Openview decoder is connected to a power supply but there is no red nor green light. How can I fix this?
First try a power cycle. Remove the wall plug for 5 minutes. Press and hold the power button for 2 minutes. Let go and plug the decoder back in.
If that didn't make it work, it's time to test the power supply. Take out your multimeter and test the power plug end for voltage. It is likely to be 12 volts DC. Power adapters can be sourced inexpensively.
Or send it back and get a new one under warranty.
Openview Decoder Only
https://www.openview.co.za > get-openview > openvie...
You can enjoy local and international shows, including blockbuster movies, drama, series, kids' entertainment, reality, sports, music, Bollywood, as well as ...
My megapro player shows no disc though there is disc inside and also the eject won't work
If your Megapro player is not recognizing the disc and the eject button is not working, there may be several potential causes, including:
- Dirty or damaged disc: The first thing to check is the condition of the disc itself. If the disc is dirty or scratched, it may not be readable by the player. Try cleaning the disc with a soft cloth or disc cleaning solution, and check for any scratches or damage.
- Broken or jammed mechanism: It's possible that the disc mechanism inside the player is broken or jammed, preventing the disc from being read or ejected. In this case, the player may need to be disassembled and repaired or replaced.
- Faulty laser: The laser that reads the disc may be malfunctioning, preventing the player from recognizing the disc. This can be caused by dirt or dust on the laser lens or a more serious issue with the laser itself. Cleaning the laser lens with a cleaning disc may help, but if the problem persists, the laser may need to be replaced.
- Software issues: It's possible that there is a software issue with the player that is preventing it from recognizing the disc or responding to the eject button. In this case, a factory reset or firmware update may be necessary.
If you are not comfortable with disassembling and repairing the player yourself, it may be best to take it to a professional repair service or contact the manufacturer for assistance.
Un65tu7000fxza - blinking red light
It sounds like you have already done some troubleshooting on your UN65TU7000FXZA TV. Based on the symptoms you described, it's possible that the issue may be with the backlighting system or the T-con board.
Here are a few steps you can try to further troubleshoot the issue:
- Check the backlighting: Shine a flashlight on the screen and see if you can see any images. If you can see faint images, it's possible that the backlighting system is not functioning properly. In that case, you may need to replace the LED strips or the power supply board for the backlighting system.
- Check the T-con board: The T-con board controls the timing and signals for the display. If this board is not functioning properly, it can cause issues with the display. You can try replacing the T-con board to see if that resolves the issue.
- Check the capacitors: Faulty capacitors on the power supply board can cause issues with the TV turning on and off. Check the capacitors on the power supply board to see if they are swollen or leaking. If they are, you will need to replace the power supply board.
- Check the cables: Ensure that all cables are connected securely and there are no loose connections.
If none of these steps resolve the issue, it may be best to consult with a professional TV repair technician or contact the manufacturer for further assistance.
Onn TV troubleshooting-cycling video Rd-Gn-Bl-Wh-Bk
Based on the information you provided, it sounds like your Onn TV is stuck in a boot loop, where it continuously cycles through a sequence of colors without progressing to the actual boot-up process. Here are some troubleshooting steps you can try:
- Power cycle the TV: Unplug the TV from the power source and wait for a minute before plugging it back in. Then try turning on the TV and see if it progresses past the cycling colors.
- Reset the TV: Check the manual to see if there is a reset button on the TV or a combination of button presses that can reset the TV to factory settings. Try resetting the TV and see if it resolves the issue.
- Check the power supply: Use a multimeter to test the voltage output of the power supply board to make sure it is within the specified range. If the voltage is outside of the specified range, then the power supply board may need to be replaced.
- Check the LED backlight: Use a digital oscilloscope to check the voltage output of the LED backlight driver board. If the voltage is unstable or missing, then the LED backlight driver board may need to be replaced.
- Check the T-Con board: Use a digital oscilloscope to check the signal output of the T-Con board. If the signal is unstable or missing, then the T-Con board may need to be replaced.
If none of these steps resolve the issue, then it may be necessary to contact Onn customer support for further assistance.
Sled-40fhd software download
I'm sorry, but I would need more information to assist you with your request. What is the brand and model of your TV? Additionally, what kind of software are you looking to download? Please provide as much detail as possible so I can better assist you.
My Dstv receiver model 65 is not responding to dstv remote control model B4, what should I do?
If your DStv receiver is not responding to your remote control, here are a few troubleshooting steps you can try:
- Check the batteries: Make sure that the batteries in your remote control are fresh and properly inserted. Weak batteries can cause the remote control to stop working.
- Reset the remote control: You can try to reset your remote control by removing the batteries, pressing any button for 5 seconds, and then reinserting the batteries.
- Clean the remote control: Sometimes, dust or dirt on the remote control's buttons can interfere with its functionality. Clean the buttons with a dry cloth or a slightly damp cloth to remove any buildup.
- Reset the DStv receiver: Try resetting your DStv receiver by unplugging it from the power source, waiting for 30 seconds, and then plugging it back in.
- Re-pair the remote control: If none of the above steps work, you can try re-pairing your remote control with the DStv receiver. To do this, press and hold the "Shift" and "TV" buttons on the remote control for 5 seconds, then enter the 4-digit code that corresponds to your DStv receiver.
If none of these steps resolve the issue, you may need to replace your remote control or contact DStv customer support for further assistance.
Hi, I'm looking for the remote code for a sinotec MD-001 XTREME MEDIA CENTRE
The remote code for the Sinotec MD-001 XTREME MEDIA CENTRE may vary depending on the brand of universal remote you have. You can try the following codes to see if they work with your remote:
If none of these codes work, you can also try using the auto-search function on your universal remote to find the correct code. Consult your universal remote's user manual for instructions on how to do this.
Not finding what you are looking for?