20 Most Recent
Tvone TV-207 Television - Page 5 Questions & Answers
Onn tv Stuck in Burn Mode
It sounds like you have already done some troubleshooting by replacing the TCON and main boards, but you are still encountering issues with the TV being stuck in burn mode. Here are some additional steps you can try:
Power cycle the TV: Turn off the TV and unplug it from the power source for a few minutes, then plug it back in and turn it on again.
Check the cables: Make sure all cables, including the HDMI and power cables, are securely connected to the TV and any external devices.
Reset the TV: Look for a "reset" or "factory reset" option in the TV's menu settings. This will restore the TV to its default settings and may help resolve the issue.
Contact the manufacturer: If none of the above steps work, you may need to contact the manufacturer for further assistance. They may have additional troubleshooting steps or be able to repair or replace the TV if it is still under warranty.
Hopefully, one of these steps will help resolve the issue with your TV being stuck in burn mode.
I have just reset my telefunken TLEDDS 55FHD and now the colour has changed how do I fix that
When you reset your Telefunken TLEDDS 55FHD, the TV's picture settings may have been reset to their default values. This could be the reason why the colors on your TV may have changed. To fix this, you can try the following steps:
Go to the TV's settings menu: Press the "Menu" button on your remote control and navigate to the "Picture" or "Display" settings.
Adjust the color settings: Look for options such as "Color Temperature," "Color Saturation," "Tint," and "Sharpness." Adjust these settings until you achieve the desired color output.
Use a calibration tool: If you have a calibration tool, you can use it to calibrate your TV's color settings to your liking.
Perform a factory reset: If you have tried the above steps and the color output is still not satisfactory, you can perform a factory reset. However, note that this will erase all your settings, and you will have to set up your TV from scratch.
If none of these steps work, you may need to contact Telefunken's customer support or take your TV to a repair center for further assistance.
Where is the reset button on the veon remote?
The location of the reset button on a Veon remote control may vary depending on the specific model, but in general, the reset button is usually located on the back of the remote control. Look for a small, circular button that may be labeled "Reset" or "RST".
To reset the Veon remote control, press and hold the reset button for a few seconds until the LED light on the remote control turns off and then turns back on again. Release the reset button, and the remote control should be reset to its default settings.
If you're unable to locate the reset button on your Veon remote control, consult the user manual or contact the manufacturer for assistance.
Siemens heliophos 4e wiring diagram
It is important to consult the user manual or contact the manufacturer directly for any technical information or support related to a specific product.
They will be able to provide you with the most accurate and up-to-date information on the wiring diagram for the Siemens Heliophos 4e X-ray machine.
How do I scan the TV clc501 for channels? I don't see a button for (antenna) to scan channels. I am only getting 2 channels, any help would be appreciated.
I can provide some general steps on how to scan for channels on a TV:
Make sure that your TV is connected to an antenna or cable input.
Turn on the TV and go to the main menu or settings.
Look for an option to scan for channels or auto-tune. This option may be labeled as "Channel Setup" or "Channel Scan."
Select the option to scan for channels and wait for the TV to complete the process. This may take several minutes.
Once the scan is complete, you should see a list of available channels on your TV.
If you're still having trouble, I suggest referring to the user manual that came with your TV for more specific instructions. Alternatively, you can try contacting the manufacturer's customer support for assistance.
MD-1700 keyboard lights up but won't do anything?
Based on your description, it sounds like your Blaupunkt 32-inch flatscreen TV may have a damaged screen. The ink-like appearance and brief flicker followed by a dark screen are indicative of a physical crack or damage to the screen.
It is possible that the TV was able to function normally after the fall, but over time the damage to the screen worsened and is now causing the issues you are experiencing. Unfortunately, this type of damage is typically not repairable and would require a replacement of the entire screen, which can be costly.
If the TV is still under warranty, you may be able to get it repaired or replaced through the manufacturer. Otherwise, you may need to consider purchasing a new TV if the cost of repairing the the screen is prohibitive.
Kef kit 120. Lights on dvd unit come on for about 5seconds then go off and leaves just the power light on. If I press the power button afterwards nothing happens and the lcd display doesn't come on.
Based on the information provided, it seems that there may be an issue with the DVD unit of your Kef kit 120. Here are a few troubleshooting steps you can try:
Check the power source: Make sure that the Kef kit 120 is properly plugged into a working power outlet. If it is, try plugging another device into the same outlet to ensure that the outlet is working properly.
Check the cables: Make sure that all cables are properly connected to the Kef kit 120 and that there are no loose connections. Also, check the cables for any damage or signs of wear and tear.
Reset the Kef kit 120: Try resetting the Kef kit 120 by unplugging it from the power source for a few minutes and then plugging it back in. This can sometimes help to resolve issues with electronic devices.
Contact Kef customer support: If none of the above steps resolve the issue, it may be a more serious problem with the DVD unit itself. In this case, you may need to contact Kef customer support for further assistance or to arrange for a repair or replacement.
Clark model FCG 32, error code 42
Error code 42 on a Clark forklift model FCG 32 indicates a problem with the fuel system. Specifically, it means that there is a problem with the fuel injection system, such as a clogged fuel filter, damaged fuel injector, or fuel pump failure. This can result in a lean or rich fuel mixture, causing the engine to run poorly or not at all. It is recommended to have a certified mechanic inspect and repair the fuel system to ensure safe operation of the forklift.
Have you got a DSE Y1299 Manual for Stopwatch
I can guide you on how to search for a DSE Y1299 Manual for Stopwatch online.
You can start by searching for the manual on the manufacturer's website or by searching for it on a search engine such as Google. You can type in "DSE Y1299 Manual for Stopwatch" and browse through the search results. You may also check online marketplaces such as Amazon or eBay as they sometimes have manuals for sale.
If you are unable to find the manual online, you can try reaching out to the manufacturer's customer support or contacting a local retailer who sells DSE products to see if they can provide you with a copy of the manual or help you find one.
My tv screen went black, can't seem to reset it.
It sounds like the television isn't turned on! Use the button that is hiding on the outside of the television. They are either on the bottom front under edge, or on the left of right, rear angled quarters.
Batteries should always be changed as new pairs. Always keep a pack of 4 x AA and 4 x AAA. I keep packs of 10, and also C size, D size and MN1500 9 volt. I used to be a Boy Scout, and the motto is "Be Prepared". :>)
make model manual
You can also try a power reset, pull the wall plug for 10 minutes.
Just for info, all questions should have 'make model (what it is)' as the first 3 words.
What is a USA Collection Friendship Lamps?
The Friendship Lamp is a product that allows people to stay connected with their loved ones who may be far away. The lamps come in pairs, with one lamp staying with the owner and the other with their loved one. When one person touches their lamp, it emits a colorful glow that is mirrored by the other lamp, no matter where it is in the world. This way, even when physically apart, the two lamps allow people to stay connected and let their loved ones know that they are thinking of them. The USA Collection Friendship Lamps are a specific version of the Friendship Lamp that features a design inspired by the American flag.
Ideal 4105 Cross Cut Machine made in Germany.
Question edited to fix jumbled order and add CAPS..
You posted to the Category 'Television and Video'. This an Office Shredder.
'Cross Cut' is what it is, bits too small to put back together. This machine has variable cuts and is designated 'P1, P2'.
Shredders IDEAL 4105
Cutting width: 12mm, 9mm, 6mm, 3mm
Year of construction: 1988-1989
Productivity: approx. 70 sheets (DIN A4, 70g/m²)
Price: on request
Cutting speed: approx. 200 mm/s
the security level: P1 - P2
Power supply: 380 V/2.2 kW
Not finding what you are looking for?