/* Style Definitions */
mso-padding-alt:0in 5.4pt 0in 5.4pt;
font-family:"Times New Roman";}
t needs to be realigned
remove dvd drive (4 screws)
remove power cable to dvd right rear of unit on circuit board
(squeeze plastic connector and pull up)
remove ribbon cable CAREFULLY wiggle it from side to side and it will come up
Then with drive removed, open up drive to access the bottom near front
Once open you will see a smalll motor and a white pice of plastic that
slides. with tray closed slide that piece of plastic as far towards
the middle as it will go
with that slid all the way over you should be done.
close it up and be carefull sliding the ribbon cable back into place
Worked for me!