20 Most Recent LG LDF6810 Built-in Dishwasher Questions & Answers


If your dishwasher problem resolved or could you use more help? Please post back, no matter which. OK?

LG LDF6810... | Answered on Sep 12, 2018


Hello... Did you check the water inlet pump is turning on to let water go inside the machine? I think if you starts a cycle and feels no water in machine it stops and give error... Hope that will be faulty or before that I'm pretty sure you forgot to open the water inlet valve because you recently repair ?? please check

LG LDF6810... | Answered on Sep 21, 2017


If the dishwasher won't drain, the drain pump might be defective. Test the pump motor with an Ohm meter. Drain pumps are not repairable, if it's defective it will need to be replaced.
If the dishwasher won't drain the check valve might be stuck closed. The check valve is a device which prevents water from returning to the dishwasher after it has drained. If the valve gets stuck closed, it will prevent the water from draining. The check valve is located in or at the outlet of the pump that the drain hose attaches to. Sometimes the check valve is accessed from the inside of the unit depending on the model.

LG LDF6810... | Answered on Jan 04, 2015


Check for broken door latch, slings on door or door switches..,

LG LDF6810... | Answered on Oct 13, 2014


If it is sudden opening during cycle then it is due to pressure build up inside the dishwasher is forcing the door to open.

a) Most likely your door latch is not holding proper enough. Quite common on LG.

b) May be your vent in the dishwasher is blocked so the pressure inside cannot get out. If vent blocked you have plate drying problems too.

c) Is the dishwasher leveled properly. Is it leaning to the front. This will be that extra help for the door to open when pressure build up inside the dishwasher.

LG LDF6810... | Answered on Sep 27, 2014


According to the owner's manual it's a 'water input error'. You have to check for a kink or clog to the water hose running to your machine.

LG LDF6810... | Answered on Feb 07, 2013


This seems to be a very common problem withe these dishwashers. The LE error code (locked engine) is not allways indicative of a motor problem. I had the same issue with my diswasher (3 months out of warranty). I found out that one of the gray wires which runs the length of the door panel was pinched and broken simply from the repetative motoin of opening and closing the door over time (very poor design). Good news is that it was an easy fix. Simply unscrew the front door panel from the retaining screws on the inside of the perimiter of the door. Once the screws are removed pull down and out to remove the door panel. Remove the sound insulating material and you will see several wires routed from the contol panel the length of the door to underneath the unit. Inspect the wires thouroghly. Near the bottom is where the pinching can take place. There are two gray wires and if you have been getting the "LE" error code, one of those wires is most likely broken or pinched. Splice, reconnect, solder or tape and you're back in buisiness!

LG LDF6810... | Answered on Dec 01, 2012


I have also found this happening. I have found that if you switch the dishwasher off 2-4 minutes into the dry cycle and leave it for a few hours or over night the dishes are completely dry

LG LDF6810... | Answered on Jul 29, 2012


If the heating element is fine then the problem is hard water. www.dishwasherfilter.com has a product to solve this problem once and for all. It filters the water going into your dishwasher and removes the hard minerals that leave those spots. It is very affordable and even has a money back guarantee. You will love the way your dishes look with this product.

LG LDF6810... | Answered on Nov 20, 2011


When you repair the wires, be sure to wrap the wire harness is plastic like the type you would find in Safeway produce section.  This will keep the wire harness from getting melted on to the black insulation and creating this problem again.

LG LDF6810... | Answered on Oct 26, 2011


It is possible that the machine does not start off the cycle because there are errors or feedback from the inputs. For the program to start up the main program controller must initiate the INLET/PUMP MOTOR/DRAIN to work when it is commanded .If this does not happen then the voltage at these points must be checked or the fault relates to no voltage/drive from the controller. This means the controller is a suspect.

Check how to remove the control panel: http://www.espares.co.uk/advice/dishwashers/a/3/1287/how-to-replace-a-hotpoint-dishwasher-fascia-p.html

If the water flows then the flow should be good, if not the inlet valve is bad or there is dirt in the filter. Also check the flow at the inlet of the water line. What is most important for the motor to start functioning is that the door switch must be ON when the door is shut or this will be an error for starting the motor. The water pressure must be good and the spraying must be seen to be good. If there is low pumping or pressure then the spray arms will not turn around to inject with pressure. If so the pump must be checked for clogging.

To replace check this link:

http://www.espares.co.uk/advice/dishwashers/a/3/1293/how-to-replace-the-spraying-system-on-a-dishw.html

Finally after the wash the drain valve will be activated, the water is allowed to come in to rinse and then finally the drain valve/pump activated so as to drain off all the water.

Make sure that a fault in any of the cycle will relate to the specified action, so check the command from the program module and then the executing device be it the valve or motor or pump.

Please check the link below:

http://www.espares.co.uk/advice/dishwashers/a/3

Thank You for using Fixya


.

LG LDF6810... | Answered on Sep 23, 2011


check hot air. Refer service center

LG LDF6810... | Answered on Sep 11, 2011


Hi,
Here is a tip that I wrote that will help you with your dishwasher not drainingproblem...

Dishwasher Problems - Waterwill not drain out

heatman101

LG LDF6810... | Answered on Aug 15, 2011

Not finding what you are looking for?
LG LDF6810 Built-in Dishwasher Logo

99 questions posted

Ask a Question

Usually answered in minutes!

Top LG Dishwashers Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Mike

Level 3 Expert

4369 Answers

Bill Johnson

Level 2 Expert

306 Answers

Are you a LG Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

LG Dishwashers

  • LG Dishwashers

Most Popular Question

dishwasher not drain

  • Dishwashers
Loading...