20 Most Recent KitchenAid KGSS907SSS Gas Kitchen Range Questions & Answers

Oven door won't close

You should not have been able t force the oven open when in self cleaning mode since u did I am sure that you have damaged the locking mechanism and the solenoid lock inside the top of the oven that sets the lock when doing self cleaning.

this is not a huge problem but it needs to be fixed most likely not by u call an appliance rpair shop in your area and it should cost no more than $150 to fix

KitchenAid... | Answered on Feb 12, 2018

1 Answer

Kitchenaid kgss907sss neither the broiler nor the oven will heat with fire. the elecricburner does work however but does not heat well enough. i can hear the igniter click once after turning it on but

For broil burner ignition an oven broiler burner spark electrode is used to ignite the gas. The electrode is a device that sits right next to the broil burner. It functions like a spark plug. As power is applied to it a spark jumps from the spark electrode tip to the to the electrode shield, igniting the gas. If the electrode is broken or worn out the spark may not occur or be intermittent. Visually inspect the electrode assembly for cracks in the porcelain housing or damage to the electrode tip itself. Be aware that a proper ground and the correct polarity of the incoming voltage to the range is necessary for the electrode control to sense the presence of a flame once the burner is ignited.
there is also a spark control module but I don't think that's it usually no spark when bad.
if you need or want parts ck here for your unit.
hope this helps a little
https://www.repairclinic.com/Shop-For-Parts/-x6b677373393037737373/Kgss907sss-Parts

KitchenAid... | Answered on Jan 05, 2018

0 Answers

My Kitchenaid gas range

KitchenAid... | Posted on Apr 21, 2017 | Be the first to answer

2 Answers

Hi,My oven won't light but I can smell gas and hear the clicking when I went to light it Kit. Aid model # KGSS907 Thank you. Steve

which one is your model KGSS907SBL00 (30`` Slide-In GAS OVEN CONVECTION)
> KGSS907SBL01 (30`` Freestanding GAS OVEN CONVECTION)
> KGSS907SBL02 (30`` FREESTANDING GAS OVEN CONVECTION)
> KGSS907SBL03 (30`` Freestanding Gas Range with Convection Oven)
> KGSS907SBT00 (30`` Slide-In GAS OVEN CONVECTION)
> KGSS907SBT01 (30`` Freestanding GAS OVEN CONVECTION)
> KGSS907SSS00 (30`` Slide-In GAS OVEN CONVECTION)
> KGSS907SSS01 (30`` Freestanding GAS OVEN CONVECTION)
> KGSS907SSS02 (30`` FREESTANDING GAS OVEN CONVECTION)
> KGSS907SSS03 (30`` Freestanding Gas Range with Convection Oven)
> KGSS907SWH00 (30`` Slide-In GAS OVEN CONVECTION)
> KGSS907SWH01 (30`` Freestanding GAS OVEN CONVECTION)
> KGSS907SWH02 (30`` FREESTANDING GAS OVEN CONVECTION)
> KGSS907SWH03 (30`` Freestanding Gas Range with Convection Oven)
> KGSS907XSP00 (30`` FREESTANDING GAS OVEN CONVECTION)
> KGSS907XSP01 (30`` FREESTANDING GAS RANGE WITH CONVECTION OVEN)

KitchenAid... | Answered on Jul 26, 2016

0 Answers

If the if the electric sparker works on the 4 stovetop burners but not the bake or broil in the oven is it the gas valve solenoid or the ignition module? thanks

KitchenAid... | Posted on Dec 22, 2015 | Be the first to answer

0 Answers

Oven continues to preheat and the temperature does not increase

KitchenAid... | Posted on Nov 03, 2015 | Be the first to answer

2 Answers

Back left burner does not lite There is a spark, the gas come out but it wont turn on

can you light it with a match?

KitchenAid... | Answered on Apr 07, 2015

2 Answers

I have KitchenAid electric range Kess907, the dipslay control panel does not work. the wierd thing the stove top operates and when the stove door opens the light comes on.

You will need to replace the control board. Here is that part to order.
Whirlpool W10181439 Cntrl Elec AppliancePartsPros com
There is also a video on that same parts page to show you how to make the repair.

KitchenAid... | Answered on Dec 06, 2014

pdf Manual

Flames are orange and yellow not blue

A Yellow or Orange indicates your burning too much gas and not enough air. You need to make sure the gas orfaces and air input is clean of grease and gunk, and then adjust the iar input opening to the proper color (Blue) flame.

If I can be of any more help, please email me at [email protected]. "Original Radio Man" Ed

KitchenAid... | Answered on Feb 13, 2013

0 Answers