Vector Model VEC438: Won't power-on
Your Vector is having an hardware problem. The best you can do is to service it and you might be lucky it responds to the servicing. There is no major fix to this problem...
Get a screw driver, disassemble the vector. Get a tooth brush and mentholated spirit, dip the tooth brush into the mentholated spirit, and use it to wash/clean the vector's board. After that, dry the vector board under heat from sunshine or any electric device. The heat should dry the board. Wait a while for the board to cool. Assemble the vector back together then try again.
If the above doesn't help, replace the battery.
If non of the above seems to help, then you might have to use the vector like that as there is not major fix to this problem..... It's a problem from the mother board.
Keep me posted.
on Aug 11, 2011