Top 20
Samson C03U Professional Microphone Questions & Answers
I am installing the CO3U
You need to select Samson C03U as the Default Device. Do not select Realtek. Realtek is the sound card that's built into the computer.
The best Rec. levels
As with all recording levels it's best to keep them to a max of 0 VU on the level meter. Some say an odd peak into the red or above 0 VU is acceptable, but it should not go to high. Sett it on the loudest part of what you are going to record, then the rest of the time should be OK. Try some loud music first if it's all speech. That should set the right level for the speech. It is possible to increase the audio level on Audacity afterwards anyway.
Samson c03u drivers
The C03U uses the computer's built-in drivers. You don't need to download anything.
Repair tiserge
The diaghram could be busted or something faulty on the board. MAke sure its getting phantom power aswell.
When I record vocals with stereo setting it always
Your microphone is a mono input (one), therefore recording in stereo is not practical. Stereo inputs are left and right (two inputs). Whatever your recording setup or audio workstation, the track you record to from your microphone needs to mono.
My Samson C03U Sound
i am using samson c03u to record songs using magix music maker, never had problems with it until i fell pregnant and gave birth so i stopped using it for a while. now that im back to record songs again, i started recording and everytime i playback the song i recorded, the music is fine but my voice started jumping like a pirated cd. im using windows vista and i already tried clearing the junk and re installing the programs but it still does the same thing. please help if anyone's got an insight about this. Ta
Microphone records very quietly.
go into control panel/sounds and audio devices/voice and in the voice recording and click the volume button and on the slider that's labled mic pull it up.
My comp wont recognize the mic
Have you tried another USB cable? Failing that, can you try the mic on another computer, take it round to your friends house or something?
If it still misbehaves, it's obviously gone faulty and needs fixing. Get in touch with the retailer or Samson support.
Hello I'm Samson. How does this program work?
Hello Sampson
People ask questions. Experts answer them. No one get paid, people answer just for the joy to be able to help others.
People who use AI Chat GPT to answer, people who answer just for points get deleted. Points are for fun.
It isn't a 'program', it is a peer to peer self help website.
ADMIN Andrew
..
Samson airline cr 77 receiver has no output
There could be several reasons why your Samson Airline CR77 receiver is not producing any output:
- Volume levels: Ensure that the volume levels on the receiver are turned up and not muted.
- Output mode: Check if the output mode on the receiver is set to the correct mode (balanced or unbalanced).
- Cables: Make sure that the cables used to connect the receiver to the sound board are functioning properly and are plugged in correctly.
- Interference: Check if there is any interference from other wireless devices operating in the vicinity. This can cause signal dropouts and affect the receiver's output.
- Dead batteries: Check if the batteries in the receiver are charged or need to be replaced. A low battery can cause a drop in output.
If none of these solutions work, you may need to contact Samson's customer support for further assistance or consider taking it to a professional technician for repair.
Not finding what you are looking for?