20 Most Recent Yamaha RX-V559 Receiver - Page 9 Questions & Answers

Hello Gerardo, check the impedance of your speakers are 8 Ohms or more, if they are less than 8 Ohms, you can produce the failure you say It also checks the real power that each speaker can handle and that is according to the manufacturer's specifications Check the connections of the speaker cables, which do not have copper hairs that are joining between the positive and the negative Test, disconnect all the speakers and go connecting one to one and try in high volume, then disconnect that and connect another and tests, so with all This test is to know if you have any speaker with problems If you can not solve, look for a specialized technical service Greetings Franco Dosil Hola Gerardo, comprueba la Impedancia de tus bafles sean de 8 Ohms o mas, si son de menos de 8 Ohms, puede producirte la falla que comentas Tambien revisa la potencia real que puede manejar cada parlante y que este de acuerdo a las especificaciones del fabricante Revisa las conexiones de los cables de parlantes, que no tengan pelos de cobre que se esten uniendo entre el positivo y el negativo Prueba, desconectar todos los parlantes e ir conectando de a uno y probar en volumen alto, luego desconectas ese y conectas otro y pruebas, asi con todos Esta prueba es para saber si tienes algun parlante con problemas Si no logras resolver, busca un servicio tecnico especializado Saludos Franco Dosil https://usa.yamaha.com/files/download/other_assets/1/334221/RX-V995.pdf https://www.manualslib.com/manual/197447/Yamaha-Rx-V995.html

The internal microcomputer has frozen, due to an external electric shock (such as lightning or excessive static electricity) or to a drop in the power supply voltage. Hold down z (power) on the front panel for more than 10 seconds to initialize and reboot the unit. (If the problem persists, disconnect the power cable from the AC wall outlet and plug it again.)

Do the lights come on? The click is the relay throwing the unit into prtection mode. Check to make sure the speaker wires are secure in back and not touching each other...

this is fixya not yamaha

"Is there away to check the subwoofer output signal , to confirm if the signal is correct." Yes.
(1)Input 1KHz sine wave downloaded from internet into subwoofer.
(2)open the subwoofer
(3)connect an oscilloscope to the speaker output.
(4)Probe to +ve terminal. -ve terminal to earth clip.
(5)Observe any discrepancy.

“Yamaha RX-V473 AV Reciever how to turn on standby mode?” Download RXV473 service manual and user manual to solve this problem or phone yamaha to call for help.

“has no sound on FM Radio but does have sound on AM Radio and TV any advice would be appreciated.” Problem comes from the ALL-IN-ONE radio tunner, replacing it to fix the problem.

Hello Sandy, for what you say, it is very likely that the system that raises and lowers the arm is hardened or locked It would have to disarm and clean the mechanism I do not suggest you do so, contact a specialized technical service I hope I can solve the problem Greetings Franco Dosil Hola Sandy, por lo que cuentas, es muy probable que se encuentre endurecido o trabado el sistema que sube y baja el brazo Habria desarmar y hacer una limpieza al mecanismo No le sugiero que lo haga, pongase en contacto con un servicio tecnico especializado Espero pueda resolver el problema Saludos Franco Dosil https://www.vinylengine.com/library/yamaha/p-550.shtml

5 seconds shut down: dc protection triggered. (DC outputted from speaker terminals.)Make sure +B and -B are equal first . The problem also comes from voltage amp circuit board including differential amp and constant current source but power transistors mounted are ok. Remember to download HTR 6130 service manual .

Hello Claude, try replacing the cable of your laptop, if it still fails, change input on the Yamaha or try another notebook, this way you are discarding fault elements It would be good if you commented that the brand and model is your portable I hope you can hear your laptop on your Yamaha Greetings Franco Dosil Hola Claude, prueba reemplazar el cable de tu portatil, si aun falla, cambia de entrada en el Yamaha o prueba con otro portatil, de esta manera vas descartando elementos de falla Seria bueno que comentes que marca y modelo es tu portatil Espero que logres escuchar tu portatil en tu Yamaha Saludos Franco Dosil

Hello Dianna, check that the cable that goes from the decoder is well connected, if so, change it for another of the same characteristics, if this continues the problem, connect the decoder to another input of the TV, if it still does not work, connect the decoder on another TV and check that you see it, if this is so, you would have to have the TV checked at a specialized technical service You have not specified which TV model you have I hope you have served my suggestions Greetings Franco Dosil Hola Dianna, controla que el cable que va desde el decodificador se encuentre bien conectado, si es as?, c?mbialo por otro de iguales caracter?sticas, si as? continua el problema, conecta el decodificador en otra entrada del televisor, si aun as? no funciona, conecta el decodificador en otro televisor y comprueba que lo vea, si esto es as?, tendr?as que hacer revisar el televisor en un servicio t?cnico especializado No has especificado que modelo de televisor tienes Espero te haya servido mis sugerencias Saludos Franco Dosil

Hello Suzanne, if the system you use with your Yamaha HTR-6063, is compatible with the Yamaha RX-V685 I send you the links to download the user manual of the Yamaha RX-V685 and the Quick Guide of your Yamaha HTR-6063 I hope my comment will serve you Greetings Franco Dosil Hola Suzanne, si el sistema que usas con tu Yamaha HTR-6063, es compatible don el Yamaha RX-V685 Te envio los link para que descargues el manual de usuario del Yamaha RX-V685 y la Guia Rapida de tu Yamaha HTR-6063 Espero que te sirva mi comentario Saludos Franco Dosil https://uk.yamaha.com/files/download/other_assets/2/1182662/web_ZZ76260_RX-V685_qsg_BGEFS_EnFrEsPtRu_A1.pdf https://au.yamaha.com/files/download/other_assets/0/317610/HTR6063_IM.pdf

Hello Garry, ask, have you tried on both AV1 and AV3 fiber optic inputs on your Yamaha? Because apart from these two inputs of Fiber Optics, the Yamaha, has an Optical Fiber Output, which could lead to a connection error I sent you the link of the User's Manual so you can download it, on page 5, it shows the back panel of the HTR-6295 I hope my comment has served you Greetings Franco Dosil Hola Garry, pregunta, has probado en las dos entradas de fibra optica AV1 y AV3 de tu Yamaha? Porque aparte de estas dos entradas de Fibra Optica, el Yamaha, cuenta con una Salida de Fibra Optica, la cual podria llevarte a un error de conexion Te envio el link del Manual de usuario para que lo descargues, en la pagina 5, muestra el panel trasero del HTR-6295 Espero te haya servido mi comentario Saludos Franco Dosil https://ca.yamaha.com/files/download/other_assets/2/324702/HTR-6295_C.pdf

Hello Richard, if your Bose Acoutimass 5 Series II, are compatible with your Yamaha RX-V379, using them in the L and R Front outputs of the Yamaha, this set is prepared to work between 10 to 200 watts of power, your Yamaha delivers 70 watts per channel, what is within the range of work of the Bose I am sending you the link so you can download the Bose guide I hope you enjoy the Yamaha-Bose convention Greetings Franco Dosil Hola Richard, si tus Bose Acoutimass 5 Series II, son compatibles con tu Yamaha RX-V379, usandolos en las salidasL y R Front del Yamaha, este conjunto esta preparado para funcionar entre 10 a 200 watts de potencia , tu Yamaha entrega 70 watts por canal, lo que esta dentro del rango de trabajo de los Bose Te estoy enviando el link para que puedas descargar la guia de los Bose Espero que disfrutes de la convinacion Yamaha-Bose Saludos Franco Dosil https://www.bose.es/es_es/support/products/2_speaker_home_theater_support/am5_series2.html#SupportTabs_tab0

Hi Wendy, it would be very appreciated if you indicate which devices are the ones you are using and from which you ask the question Discuss brand and model of each one and what do you want to achieve, in order to give yourself a possible solution I wait your answer Greetings Franco Dosil Hola Wendy, seria muy apreciado que indiques que aparatos son los que estas usando y de los cuales haces la pergunta Comenta marca y modelo de cada uno y que es lo que quieres lograr, a fin de darte una posiblesolucion Espero tu respuesta Saludos Franco Dosil

Hello Jody, I do not finish interpreting your need I am sending you the link to download the DSP-1 user manual I hope that you manage to solve your concern Greetings Franco Dosil Hola Jody, no termino de interpretar tu necesidad Te estoy enviando el link para que descargues el manual de usuario del DSP-1 Espero que logres resolver tu inquietud Saludos Franco Dosil https://www.manualslib.com/manual/341130/Yamaha-Dsp-1.html

“The radio has set itself to play permanently on zone 2, and I cant turn it off.” Download RXV633(YAMAHA RXV663) service manual to look for how to reset the amp. If reset does not solve the problem, matrix circuit on front panel is a main concern. Bear in mind, both Denon & Yamaha CPUs to control switching (matrix)circuit are multi-tasking, comparing Onkyo & Pioneer. Chance of CPU problem is very very low. Fixing matrix circuit is of paramount important.

Hello Rob, to solve your problem you can use an HDMI to component video converter, that way you can continue using your projector without changing the installation I sent you a link to the product that is sold in my country, you search the Internet and you will find a local store where you can buy it Another solution, if your projector has an HDMI input, would be to add a UTP network cable to the installation and place an HDMI extender on each end, this device converts the HDMI signal and transports it through the UTP cable to reach the area of the projector where the other climber is that converts the signal back into HDMI and enters it into the projector I hope you can use the suggestions Greeting Franco Dosil Hola Rob, para solucionar tu problema puedes utilizar un conversor de HDMI a v?deo por componentes, de esa manera podr?s seguir utilizando tu proyector sin cambiar la instalaci?n Te envi? un link del producto que se vende en mi pais, buscas en Internet y encontraras alg?n comercio local donde puedas adquirirlo Otra soluci?n, si tu proyector tiene entrada HDMI, seria que agregar en la instalaci?n un cable de red UTP y colocar en cada extremo un extensor para HDMI, este dispositivo te convierte la se?al HDMI y la transporta por el cable UTP hasta llegar a la zona del proyector donde esta el otro escalador que vuelve a convertir la se?al en HDMI e la ingresas al proyector Espero que te sirva las sugerencias Saludo Franco Dosil https://www.googleadservices.com/pagead/aclk?sa=L&ai=DChcSEwiLpZzcvfXhAhXFHoYKHT2AAbQYABARGgJ2dQ&ohost=www.google.com&cid=CAESEeD2kRLRwuOLgcvoMxhWHbmk&sig=AOD64_1oohrC8cT1Tz_hsrJtAuiAcZWirw&ctype=5&q=&ved=0ahUKEwiDnZTcvfXhAhUirVkKHWBmBtoQ9aACCDU&adurl= https://www.googleadservices.com/pagead/aclk?sa=L&ai=DChcSEwjyp9HywfXhAhUUTA0KHURGCNgYABAfGgJxYg&ohost=www.google.com&cid=CAESEeD2JLyqY9SkQGnByoJuS8MS&sig=AOD64_0T8tmwo-SYyFqqetXQvXutuZLjWQ&ctype=5&q=&ved=0ahUKEwjE48fywfXhAhUx11kKHTAsDVwQ9aACCE0&adurl= https://www.googleadservices.com/pagead/aclk?sa=L&ai=DChcSEwjyp9HywfXhAhUUTA0KHURGCNgYABAfGgJxYg&ohost=www.google.com&cid=CAESEeD2JLyqY9SkQGnByoJuS8MS&sig=AOD64_0T8tmwo-SYyFqqetXQvXutuZLjWQ&ctype=5&q=&ved=0ahUKEwjE48fywfXhAhUx11kKHTAsDVwQ9aACCE0&adur

Posted by Boban Matic on Jan 20, 2019 Hello Boban, for what you describe, when you have the equipment working in ProLogic, you only have sound in the central speaker and in the rear and that in 7.1 they work in total, 5 speakers, ask, work the front speakers left and right? , have you controlled your connection cables ?, have you assigned them to system A and have you enabled them? If you've done all this, the front speakers should work otherwise you would have problems in the exit stage of the fronts I suggest you take it to a specialized technical service I hope you can solve the problem Greetings Franco Dosil Hola Boban, por lo que describes, cuando tienes el equipo funcionando en ProLogic, solo tienes sonido en el parlante central y en los traseros y que en 7,1 funcionan en total, 5 parlantes, pregunta, funcionan los parlantes frontales izquierdo y derecho?, controlaste sus cables de conexi?n?, los has asignado al sistema A y los has habilitado? Si has hecho todo esto, los parlantes frontales deber?an funcionar sino tendr?as problemas en la etapa de salida de los frontales Te sugiero que lo lleves a un servicio t?cnico especializado espero que puedas resolver el problema Saludos Franco Dosil