Top 20
Back to Basics Popcorn Popper (PC6) Popcorn Maker Questions & Answers
I received a Back to Basics popcorn popper for
Hey you know it's a great popcorn maker and I have one it's an old fashioned way of cooking popcorn you know they only cost about 20 bucks I suggest you just buy another one and enjoy it
I have two of your
The manual says to put 1 to 3 tablespoons of oil in the popper, and when hot, add 1/2 cup popcorn. Salt it after dumping the popped corn into a bowl.
No instructions but wanting to know where do you
The manual says, place butter in cup, hook cup onto the rim of the pan below the "butter cup"marking on the lid, and the butter will melt and drip evenly onto the popcorn as it pops. I haven't tried it; hope it works for you.
Broken plastic window
I have found the plastic window online at the Back to Basic Company web site.
http://www.focuselectrics.com
I ordered two. They were $2.00 each plus shipping.
I navigated to the parts area, to the popcorn. Here is the link.
http://www.focuselectrics.com/catalog.cfm?dest=itempg&itemid=3678&secid=53&linkon=category&linkid=90
Hope this helps.
Back to basics machine-Is the
yes, this popper is the same at the Whirley Pop, which is the original. There shoud be a clip on the side opposite of the handle and one that is underneath the handle. Both should be fastened.
Lost measuring cup
follow this test and fix it. God bless youIf the toaster doesn't work at all, make sure power is on at the electrical receptacle and test the power cord.
If the carriage lowers but doesn't latch or latches stiffly, look
inside for food debris that may be blocking the carriage. If the latch
is damaged or obstructed, service the assembly (see below).
If the bread toasts only on one side, check the heating elements for damage and replace as needed; or replace the toaster.
If the carriage doesn't pop up and the toast burns, check the
thermostat calibration and correct any inaccurate calibration (see
below).
If the thermostat is faulty, replace the thermostat or the toaster.
Check the solenoid switch and solenoid; if faulty, service (see below)
or replace.
If the toast is too light or too dark, check thermostat calibration and correct if necessary (see below)
I need a new egg
suggest you go to "abecparts.com". on home page left there is a list of mfgers. click on back to basics.
What is back to basic
Toaster of the first order wherein there is only the heating coils arranged on either sides and the bread is loaded on the slits to be pressed down to hold on.
When the set temperature is reached then the bimetal switch releases the lock and releases the bread up.
This is the basic model with no electronics inside.
The toaster does not heat and it's only 6 mos.
1. check outlet where you plug in your toaster with lamp or vacuum.
jiggle plug of lamp or vacuum while plugged in to check for bad outlet.
if lamp or vacuum do not work, check breaker panel/fuse box for tripped breaker/blown fuse.
if breaker/fuse okay, replace outlet.
if lamp or vacuum work okay, go to next step
2. plug toaster back into outlet, jiggle plug, then jiggle cord at plug, then jiggle cord at toaster.
this checks for intermittent power cord.
if cord okay, check that the toaster lever or toast basket are not blocked from going completely down.
might be a bit of bread, muffin, bagel that blocks the basket.
if all okay, you need other solutions.....
Not finding what you are looking for?