20 Most Recent Kyocera CS-2550 Black and White Copier Questions & Answers

Unplug for 5 mins.

Kyocera CS-2550... | Answered on Dec 24, 2019

press 1087, 1087 until the machine shows U000 self status, press 163, press start and then scroll to execute and then press enter. the machine will iunitialize and come ready for copying

Kyocera CS-2550... | Answered on Dec 08, 2018

check that the paper size is correct on your machine then turn it off and on and the device your printing from. basically reset both. if that doesnt solve it check that the driver is correct reload driver and check connections

Kyocera CS-2550... | Answered on Nov 02, 2015

umm if I understand correctly you want one document printed same document on both sides select double side printing the where it ask for how many copies you want send to or how many of the documents you want in increments of two ex. 2=1 double side copy,4=2 double sided ,6=3double sided

Kyocera CS-2550... | Answered on Nov 02, 2015

You can find documentation form Kyocera Printers here, though it barely mentions anything about their OCR feature:

The OCR feature is only an image quality setting, producing a more black and white high contrast image rather than a grey scale image.

I'm using our Kyoceras to email the images to a server where "send mail" processes the image and runs OCRopus, an open source Google funded OCR project, to read information from the scan.

I'm finding there are many Virtual ReScan solutions, like Kyocera's OCR feature, VRS software produces OCR optimized images, though I haven't found an open source VRS project.

Kyocera CS-2550... | Answered on Oct 17, 2015

HI there try the following.
  • Open Internet Explorer
  • Type in the address bar the IP address of the scanner (If you do not know this print out a status page)
  • Once you have typed in the IP address you will then have the scanner configuration screen on the left you should have passwords section you will be able to change it from there.
Hope this helps you
Thanks J

Kyocera CS-2550... | Answered on Feb 26, 2013

A KM-2550 has 64 MB RAM built in. I believe less than 30 of it is for image storage. You may be able to lower your scan resolution. 
Best solution is to add more memory. Look for a Kyocera compatible 100 pin dimm (don't buy from the manufacturer). It will read 16 MB to 256 MB sticks. You have to take out 6-8 screws holding on the part of the back the sticks out on the upper left. Make sure after installing you print a status page to make sure the memory was recognized.

Kyocera CS-2550... | Answered on Aug 07, 2012

does the exposure lamp lights when u make a copy. if yes thenthe charging wire might be broken .check and replace it. it can also be the high voltage supply board .

Kyocera CS-2550... | Answered on Sep 13, 2011

Hey is a link to the Kyocera website that will allow you to get all the manuals for this model for free.


Hope this helps.

Kyocera CS-2550... | Answered on Jul 14, 2011

Try this... Remove all the connection to the PC (USB, network or parallel). Turn off the printer on the power plug for about 3-5 minutes. This will clear all the documents sent previously.

Kyocera CS-2550... | Answered on Mar 09, 2011

check the paper size from your page setup

Kyocera CS-2550... | Answered on Feb 16, 2011

can you place your labels on the multipurpose tray instead of using the cassette

Kyocera CS-2550... | Answered on Sep 27, 2010

Not finding what you are looking for?
Kyocera CS-2550 Black and White Copier Logo

57 questions posted

Ask a Question

Usually answered in minutes!

Top Kyocera Office Equipment & Supplies Experts


Level 3 Expert

85239 Answers

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

Timothy Van Der...

Level 2 Expert

152 Answers

Are you a Kyocera Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Kyocera Office Equipment & Supplies

  • Kyocera Office Equipment & Supplies

Most Popular Question

kyocera km 2050

  • Office Equipment & Supplies