Questions & Answers
check the obvious first. Is the mic plugged in and tightened all the way. Yes , take the bottom cover off and turn up the variable closest to the small transformer. Thats the modulation variable and the modulation transformer. If you still have a problem take it to a tech and let him fix it .
53 views | 0 helpful votes
When the microphone is keyed
think cheap.first change the mic to see if that makes a difference. If it does you now have a new mic and a radio that works.Now it gets a little more expensive. you have to open the radio so the components show . Now ask yourself which one does what ? I know you can't answer it because if you could you wouldn't have posted this. I can tell you that its in your audio circuit . Now take it to a tech and have them fix it.
83 views | 0 helpful votes
If you are using the radio on a boat, then no, the grounding does not matter that much. However, an SSB transceiver would be hassle to install on a boat because of the amount of power they use to transmit. If the transmission is bad, try using the radio's internal tuner instead of the separate tuner. This may help improve the quality of transmit, however, some radios have a tough time clarifying incoming and outgoing signals and create a garbled sound when it receives a signal or when it transmits. If that doesn't work, then you can try grounding. But if you want a radio that doesn't require all this nonsense tning, you might want to think about investing in a Yaesu. They are pricey, but are one of the best HAM radios.
205 views | 0 helpful votes
Not finding what you are looking for?