20 Most Recent Jack Lalanne Power Juicer (Stainless Steel) - Page 4 Questions & Answers

DO NOT BUY THIS PRODUCT!!!! unless the plastic drive srew is replaced with a metal one.

Jack Lalanne Juicer Manual
http://www.myeasypics.com/is.php?i=665112&img=1.jpg
http://www.myeasypics.com/is.php?i=665113&img=2.jpg
http://www.myeasypics.com/is.php?i=665114&img=3.jpg
http://www.myeasypics.com/is.php?i=665115&img=4.jpg
I hope this helps.

I read the suggested solution under "Best Solution" and followed the directions as posted. Actually, it was very clear and accurate . . . and best of all, it worked!

Make sure the stainless bar that runs across the top from left to right is snug properly in its place. It has a cut off switch for safety. Otherwise check the outlet.

I bought this machine in a garage sale and i cant seem to take it apart.

http://www.powerjuicer.com/customer-manuals.html

This is the site to download Jack Lalanne's Power Juicer Manuals of all models which include troubleshooting guide, user instructions, cleaning and opening machine.

https://www.unitycart.com/pjss/accessories/parts_classic.asp

Heres where you can buy a new one:

https://www.unitycart.com/pjss/accessories/parts_classic.asp

http://www.powerjuicer.com/power-juicer-parts-accessories.html This is the site for ordering parts and instructions for replacing them.

http://www.powerjuicer.com/customer-manuals.html

This is the site to download User Manual, Instructions and troubleshooting Guide.

http://www.powerjuicer.com/customer-manuals.html

This is the site to download Manuals for all models of Jack Lalanne's Power Juicers. This includes trouble shooting guide, Instructions on cleaning ect...

Check the plug end of the power cord--if the cord is pulled instead of the plug, it can cause breakage of the wires inside the cord. Try pulling the plug from the cord--if the insulation seems to stretch-out, shorten the cord a little(an inch or so) and install a new replacement plug. If cord seems ok, then an internal inspection of the motor area is the next option.

i believe you would have to send it back to the manufacturer for repair or replacement

Cha-Ching. Finally. I could not sit still until tomorrow to call customer service. For a moment I thought my power juicer motor was shot. :( I was a bit sad. I patiently took apart all of the screw to realized that I only need to unscrew 3 screws on the bottom to get to the motor. Once the bottom part is open I see that one of the cables are loose and just reattached it. It is very simple wiring inside. There is only 3 cable and 3 attachment spot inside...so pretty simple. :) Happy again and Juicing :)

again, after having the same problem, i watched the video at link given here earlier. i used two ballpoint pens and gently turned the blade counterclockwise and it worked!

depending on the juicer u have if you go to their website they have instructions to take apart like i have the classis jack la lannes and here is the link to that juicer on their website and it worked for me yeah....
http://www.powerjuicer.com/pdf/classic.pdf

Make sure the stainless bar running across the top is snug on the left and right groove. It has a shut off switch when not installed properly.

Just find a big wire around 1/8 diameter. Bend it and insert both ends on the blade holes. Cover the sharp blade with cloth or use leather gloves.

The crescent tool has two lugs. They insert into the two holes in the cutter then you turn the cutter with it anticlockwise until it unscrews.