20 Most Recent
Cuisinart CB-600 Blender - Page 5 Questions & Answers
I have the red Cuisinart
if you over loaded these machines there is a thermal fuse one time shot will blow . it is not resettable , you can buy them @ Radio Shack 8 amp should do fine . it might be stamped with the rating value too. need a test meter to check component very small .187 diameter & .750 length apx
6/5/2012 7:26:24 PM •
Cuisinart...
•
Answered
on Jun 05, 2012
Hi. We have a Cuisinart
This can be coming from discoloration and/or food acting on the rubber gasket. Be sure to take the pitcher apart, removing, the screw on base cap, the blade mechanism,and the gasket to clean your blender after each use. Acids and liquids can act on the rubber causing a discoloration and this will seep into your pitcher. This should take care of your problem. If it does, please come back to Fixya and rate my solution!
7/15/2011 4:33:57 AM •
Cuisinart...
•
Answered
on Jul 15, 2011
I tried to blend large
It sounds as if the motor has burned out. You may need to purchase a new blender or send it to the manufacture for repair if it's still under warranty.
7/14/2011 3:30:53 AM •
Cuisinart...
•
Answered
on Jul 14, 2011
Breville Antony Worrall Thompson BL3 Blender user manual
Olabisi. It is better to create your own question rather than tagging a 13 year old question in the area where you ask the OP for further information before committing to an answer.
Stir function runs the blades at a much slower speed to incorporate ingredients slowly.
https://www.kitchenaid.com/pinch-of-help...
STIR. To stir ingredients in a blender, start with a low, slow speed and gradually increase it to a medium speed. Blend until ingredients are completely combined.
Different Blender Settings and What They Do - KitchenAid
..
3/26/2024 4:25:22 AM •
Blenders
•
Answered
on Mar 26, 2024
Not finding what you are looking for?