20 Most Recent Cuisinart CB-600 Blender Questions & Answers

0helpful
1answer

Lights/LED lit up, but blender does not start!

The motor brushes may be in need of replacement.
9/9/2017 3:44:31 PM • Cuisinart CB-600... • Answered on Sep 09, 2017
manual
0answers
0helpful
2answers

Blender container leaks even though gasket is in place

Hey, I know this is an old thread but just had the same problem and solved it. With the blender container upside down, place the gasket on the jar hole, put the blade through the hole on top of the gasket, then screw the plastic base on top of that.The way I had done it before was to pop the blade into the bottom of the plastic base first then screw it onto the gasket and jar but it goes on the gasket, not under the bottom of the base. Hope that helps anyone else in the future. Also just read the manual instructions like I didn't, clear as day right there but I never bothered to read them ha
1/8/2013 4:44:25 PM • Cuisinart CB-600... • Answered on Jan 08, 2013
0answers
0answers
0helpful
1answer

My CB-600 Cuisinart Blender/Food Processor

Hello, gdvorakI was trying to help you out here. Maybe this will help some? I was going backto some customers that asked questions in the recent past and even fartherback. It appeared that no one answeredsome of them, So, I thought I would take some of my personal time to see if Ican help. Even though this Informational site may not have your exact model orbrand, this site will help you a lot. Here is a site link about everything you want to know about blenders andpossibly yours, from repair to trouble shooting it. http://home.howstuffworks.com/how-to-repair-small-appliances5.htmPlease if this helped you at all, if you can find the time and in your heart torate my help and some kind words written would be appreciated for my free help, I would appreciate it. Here is also my direct link to my own pages of other areas of my expertise forother problems you might have in Automotive, Appliance, and Electronics. DropIn anytime for my help.Thanks, Mikehttp://beta.fixya.com/users/mc1bean
10/28/2011 10:25:54 PM • Cuisinart CB-600... • Answered on Oct 28, 2011
0answers
0helpful
1answer

Blender motor quit working

there are really only two options. 1- you can try to find out if the manufacture has a department in your area and weather they sell replacement parts or if not then you can take the motor to a re winder they re wind the burned out wire and replace it with new but it can be expensive but they are really your only options.

hope this helps

7/12/2010 6:26:06 AM • Cuisinart CB-600... • Answered on Jul 12, 2010
0helpful
1answer

I want gasket for cusinart blender (600watt.)

mcdevito75 here, You should be able to contact Cuisinart omline at Cuisinart.com to reder new gasket.
6/28/2010 5:59:52 PM • Cuisinart CB-600... • Answered on Jun 28, 2010
Not finding what you are looking for?
Cuisinart CB-600 Blender Logo

29 questions posted

Ask a Question

Usually answered in minutes!

Top Cuisinart Blenders Experts

Pieter Vleeshouwers
Pieter Vleeshouwers

Level 3 Expert

2029 Answers

Marvin
Marvin

Level 3 Expert

85241 Answers

Lawrence Oravetz

Level 3 Expert

10558 Answers

Are you a Cuisinart Blender Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...