20 Most Recent Linksys NSS4000 Questions & Answers

the default ip is 192.168.0.1
user name is admin and password is password

On older LinkSys routers, the default username is blank and the default password is "admin." On newer Linksys routers, both the default username and the default password are set to "admin." Once you are past the login screen, you are able to reconfigure the LinkSys router

There are a variety of ways to display the NSS Login window.
•Open the Web browser on your computer: In the Address field, enter "http://NAS<MAC address>" (For example, "http://NAS0018F804E44C".)
•Browse for the NSS from the My Network Places window.
•Select the NSS to a network drive from a mapped network drive.
The NSS Login window appears:

Also please follow the below link for manual it will help you to setup

http://www.cisco.com/en/US/docs/storage/nass/csbcdp/nss/nss4000_nss6000/getting_started/guide/linksys_gs_feb0708.pdf

let me know if this worked for you

Hi,

Please check the bellow Ink…

http://www.retrevo.com/support/Linksys-NSS4000-Storage-manual/id/19963ag414/t/2/


Let us know if you have something more to know else accept the suggestion.
Thank You for contacting Fixya.com

 
Hi there,

• Unplug the printer cable from the computer.
• Unistall the printer drivers from Device manager and also unistall the all the printer appications
• restart the computer
• try to download drivers from the website
• after installing drivers and software it will ask you to connect the printer.
• then you can connect the printer and and try to Print the test page.

Hope this help. Please Rate My Response! Thanks! 
PREM  

Hey You can refer to thin link here :
http://linksys.custhelp.com/cgi-bin/linksys.cfg/php/enduser/std_adp.php?p_faqid=15372&lid=1291355503B13

You can check the settings and if it is again again losing the settings then there might be a possibilty that the firmware of Nss4000 has gone faulty or is corrupted.
You will have to upgrade it through the CD provided to you or best will be to contact Linksys and they will be able to give you the exact information...

your english is not bad to to start with!
and the possible solution to your problem is just ask the administrator to help you out,dont try to do it yourself cause sometimes problem gets worsen!

Can you create folders by hand from the same account that the backupexec services are running under? if not you have to change the permissions.

You can't record to a network switch?? Are you thinking it is a PVR? https://www.google.com/search?q=Linksys+sr224

16-Port and 24-Port 10/100 Switches

Linksys https://downloads.linksys.com > userguide > sr2... PDF Use this guide to install the following products: SR216. 16-Port 10/100 Switch. SR224. 24-Port 10/100 Switch. 16-Port and 24-Port. 10/100 Switches. ....

https://www.linksys.com/no/support-product?pid=01t34000003qRpaAAE

Unplug the power cables of the router and the range extender for 30 seconds. Plug in the router first. Wait for all the lights to be stable then plug in the range extender. Your range extender should now be in synchronized with your router.

Manually configuring a Linksys Wireless-N Range Extender

https://www.google.com/search?q=setup+Linksys+Extender ..

Frontier Router Login at the bottom of the Network Connections window, just below the address bar. Select Wireless Properties from the menu. Locate the Network security key field on the Security tab. You'll see your Wi-Fi network password if you click the box for Show characters.

You can use rj45 cable to it .

This seems to be a symptom of a configuration error, which can be fixed by resetting the router to factory default. Do this by finding the (often partially hidden) reset button on the device, and pressing and holding down the button, with the power on, till lights start flashing on the router. Let go of the button and allow the router to reset (can take a minute or two). You will now have reset the router to factory default. To connect to your ISP, you'll need to enter your account details (and any other specific information) provided to you by your ISP. You will also have to set a name and password for the wifi section of your router (if it has wifi) if you don't want it to be freely accessible by everyone within wifi range.

Disconnect the power to it, wait 5 minutes and power back on.

Read this discussion

Internal error - code 302 on setup - Linksys Community

just fixed one yesterday. the power pack was no good.AC wall wart, power green LED blinked endless. and the white logo, LED is dead.. a new pack fixed it. also the wrong pack used, ! do not mix them up. oops. first year 54G, v1 uses 5vdc pack. at v2, and up all want to 12vdc pack, bottom sticker on above failed was v6. you said recognized, does that mean the 4 rear Ethernet wired jacks are dead, or just wifi dead.? first the ethernet ports must work, or wifi is doomed.

Good day, This might be of help . Steps To Fix Linksys Router Error 321:- Step1:- Check the Firewall Settings To check the Firewall Settings is the first priority for the users. Then check the firewall settings of the computer/ Laptop, will be helpful to find the problem. If there is any firewall installed on the computer, so the users need to turn it OFF.During the process, the users ensure that the Local Area Connection on the computer is not disabled. The Local Area Connection should not have any static IP address assigned. If there is any then the users need to immediately set the IP address to automatic. Method2:- Run the Installation CD Again:- The users require trying to run the CD again and ensure when the CD runs, it will ask to connect the computer and the modem to the router with the cable. So the users will need to notice, that there all the lights lit up on the router. If it's not, then users will need to setup their router without the CD. The users can get the instruction to setup router manually in the method 3. Step3:- Try to Setup Router Without Installation CD Setup Linksys Router without Installation CD is another best option for users in order to completely avoid the in order to fix Linksys Router Error 321. Follow the below-given instruction to Setup Linksys Router without Installation CD: First of all, connect the main computer to the Ethernet port on the router. Then the users need to connect the modem to the Internet port on the router. Now it's time to verify the status of the light that is blinking properly. Next, users need to open the setup page of the Linksys Router and then change the Internet connection settings manually. In the setup page of the Linksys Router, the users can change the settings of the router as per their needs. Then the default IP address of many Linksys router is 192.168.1.1. And the default username and password would be an "admin". Wait for a few minutes, when the main computer is able to access the Internet, so users need to create a wireless network for their wireless computers/devices. or you can call them @ Toll Free 1-800-204-6959 that is Lynksys support.

Setup helps

The vent actuators are bad. there should be two. one on each side. they are small toy like motors that open and close the vents from within to allow the hot air to blow by closing the vents to the a/c unit.