Uniden GMR-1035-2 2-Way Radio - Page 4 - Answered Questions & Fixed issues

Yes return it.

While you could solder something up, why not just get an adapter to take the single 3.5mm 3 conductor to two 3.5 plugs, One Ear and the other mic. Should work if I understood the application correctly.

https://www.manualslib.com/manual/1051746/Uniden-Bearcat-Bc-855xlt.html Uniden BearCat BC 855XLT Operating Manual

You can get it fixed. The problem is finding someone to help you. Some of us "old" techs used to repair CB's, especially for Loggers. Then they became so cheap (CB's), no one wanted to fix them anymore. We have to charge for our time and expertise. So, look for an older tech. They can guide you through the repair and may have parts.

look up microphone wiring diagram for your cb and mic. more than one way to wire, depending on mic and cb having 4 or 5 on plug end. write down mic numbers and cb plug numbers. if audio on mic is 3 and cb is 4 put 3 on 4 pin check each wire. using power mic make sure red and black wire are on the right pin, can damage radio or mic or both.

Make sure the volume is up a little and then make sure the squelch is set so you do not hear any static (white noise). Also make sure the lock button is not on. Depending on the model, make sure the channels are not locked out in the menu. Make sure there are frequencies programmed in the channels. If these suggestions don't work, tell us more about the scanner like model number, how many channels, crystal or programmable, etc.

Customer service/try utube

It sounds like it is broken! Also, the squelch could be set too high, the speaker may be shot. You can rule out the speaker being shot by putting a set of headphones into the external speaker jack. If you hear something, even loud his, then the speaker is shot. Make sure that the squelch is turned all the way down.

I don't know what this radio is, but perhaps I can help. First of all, 6 watts is output power and has nothing to do with receiving. With such a short transmit distance, my first suspicion is something very wrong with the antenna. Has the SWR on the antenna been checked? Let's start from there.

It sounds like the power regulator popped, or a power final. Have a Certified Tech. Fix it.

Reset power button on power strip first turn off then on.If that don't work check and see if it is a switched outlet turn wall switches on in area.check and make sure cord is secured to scanner. Plug a lamp that is on in the strip this will help you when you are trying to turn switches on by yourself you can see it light up.

Uniden has flat rate repair costs posted on their site

If the scanner is stuck on a channel you do not want press the L/O button.

Sounds like it's built-in internal battery is failing. Without having a service manual in front of me, suggest you open it up and look for a "button" battery (like a big watch battery) some where on it's circuit board. Hope this is helpful Regards John

Sorry we do not have this kind of info here.

do online search or electronics store

https://www.racingelectronics.com/v/files/MANUAL_Uniden_SC150.pdf here is link to manual you need.

Scanner Reset to initialize the scanner's memory, turn off the scanner. Then press 2, 9, and Hold while turning it on (It helps if you can lay it flat). The scanner will give you the option 'Restore Preprogram List? "Yes"=E/No="."', if you press 'E/Yes', the scanner reloads the preprogrammed systems. Important! This deletes all programmed data. Easier to Read BC346XT Scanner Manual here is link to manual

their maybe a firm ware update but not sure as things change so does scanners do a search or uniden site helps a lot and radio reference. good luck R&R2WAY