20 Most Recent
Uniden GMR-1035-2 2-Way Radio - Page 4 Questions & Answers
Microphone wire jack replacement
While you could solder something up, why not just get an adapter to take the single 3.5mm 3 conductor to two 3.5 plugs, One Ear and the other mic. Should work if I understood the application correctly.
CB Uniden 4-wire mic to a Uniden 510 radio how to wire color codes please
look up microphone wiring diagram for your cb and mic. more than one way to wire, depending on mic and cb having 4 or 5 on plug end. write down mic numbers and cb plug numbers. if audio on mic is 3 and cb is 4 put 3 on 4 pin check each wire. using power mic make sure red and black wire are on the right pin, can damage radio or mic or both.
Uniden bearcat scanner wont scan
Make sure the volume is up a little and then make sure the squelch is set so you do not hear any static (white noise). Also make sure the lock button is not on. Depending on the model, make sure the channels are not locked out in the menu. Make sure there are frequencies programmed in the channels. If these suggestions don't work, tell us more about the scanner like model number, how many channels, crystal or programmable, etc.
Not finding what you are looking for?
