Dell Dimension 1100 PC Desktop - Answered Questions & Fixed issues

Anonymous, Unfortunately, Dell does not have any manuals or information that provides any power button rewiring to work on other motherboards. Thank You, Dell-Jesse L Dell Community and Social Media

Assuming you are using the integrated video card there should be a audio port on the tv near the VGA port. You will have to a cable with 1/8 mini stereo jacks to plug into the pc and the TV.

video bios test failure best get a cheap 2nd hand video card and put it in to override motherboard

Try to refix the RAM and CMOS Battery.

Go to www.support.dell.com.

Only suggestion I have is back-up all important files and then reload to new computer.

Windows XP is no longer supported by Microsoft, you should load Win 7.

Follow the prompts on the os re-install disk and select to reformat the partition in use. This will wipe everything. you will need to re-install all your drivers too.

Its illegal for anyone to provide serial keys for programs that have retail values set on them its Pirating There are lots of freeware alternatives on the internet Rather doing a driver hunt which can take hours http://ct.download.com/clicks?t=1179231350-ce770fd4fbc57664a08aea1a8f03b80d-bf&brand=DOWNLOAD&s=5 Windows XP/Vista/7/8 it might take some time being a freeware driver solution Note: it will find all of your outdated drivers This will automatically search for and find the correct driver you will have to update every driver individually once you update you might be asked whether you want to restart or make a system restore point. Click no to both of these then continue updating each driver free then restart once all of the drivers have been updated.

Go here for all your drivers.
http://support.dell.com/support/downloads/driverslist.aspx?c=us&l=en&s=gen&ServiceTag=&SystemID=DIM_CEL_1100&os=WW1&osl=en&catid=&impid=

Please rate this solution

http://www.pcmag.com/encyclopedia/term/38515/beep-codesGOOD READING.

http://www.pcmag.com/encyclopedia/term/38515/beep-codesREAD THIS.

Your specs say you have 2 USB connections on the front and 4 on the back. I would connect it to the rear USB ports. This User Manual will help: http://www.andovercg.com/datasheets/dell-dimension-1100-b110.pdf

jack that is the message ? information,information is essence.

please go to bios setup and configure again. Maybe the software is corrupted. And you must to reinstall again. Do it you have some backup.However Try to restore the machine.God bless you

I would do a system restore point before the update to see if that fixes the issue.

I would do a system restore to before the Windows update. When windows update it creates a restore point. This should fix the issue. Sometimes updates don't install correctly. Usually on second install it will install correctly.

1).Try Booting up in F2 use safemode in thin make the change Safe mode is a diagnostic mode of a computer operating system (OS). It can also refer to a mode of operation by application software. Safe mode is a way to troublshoot problems.2).Try geting NVIDIA Graphics Driver 301.42Help Restore Defauits allow you to preview changes you make to the image and rending setting this will be your defauit setting for your hardware accelerated 3D application that utilize Direct 3Dor open GI.

Try to create an other user and login with that user, then check if the issue still happen.

According to the Microsoft Help and Support
CAUSE loadTOCNode(1, 'cause'); This issue may occur if your CD-ROM is failing or is not supported.
RESOLUTION loadTOCNode(1, 'resolution'); To resolve this issue: 1. Make sure that your Windows 2000 CD-ROM is clean and is not scratched. 2. If you have more than one CD-ROM drive, run Windows 2000 Setup from the other drive. 3. If these steps do not resolve the issue, you may have to replace your CD-ROM drive.