20 Most Recent Onkyo TX-SR304 Receiver - Page 2 Questions & Answers

Here is the pdf http://63.148.251.135/redirect_service.cfm?type=own_manuals&file=TX-SR304_En_0124.pdf . I found it on Onkyo's support page http://www.onkyousa.com/download/own_manuals.cfm?cat=Receiver

Check the impedance of your speakers. It sounds like the amp is getting overloaded and shutting down either for over current or over heating.
Most common issue is a partially blown speaker or crossover.
Sometimes it's just a rogue strand of wire, and reconnecting everything fixes it.
But measure the impedance on all the speakers anyways!

The pecking order for output video to your monitor forbids a lower quality video (composite (Yellow) being up-ticked to anything higher (your component out) (Page23).

The wii would be visible on the Monitor Out composite output (Page 24) to the TV.

Your Onkyo TX-SR304 receivers remote (RC-645S) is not capable of controlling devices by other manufacturers. It controls only Onkyo devices.
Other Onkyo remotes do have universal remote functionality and you can download Onkyo remote codes here.

I hope that helps.
________________________________________
Download Onkyo TX-SR304 users manual here.

most of the time this is an over heating problem with the unit. Make sure that it has proper ventalation around it. It could also mean that the fan is shot on the unit . You could try using a can of compressed air in it to free up some of the dust that has accumalated inside of the unit. Hope this helps

The only possibility that comes to mind is that it may be causing a short somehow when the carousel gets to that position, maybe a broken solder joint. Another possibility is that there may be a foreign object stuck inside the player such as another disc that lost it's position.

i think ur unit deposits humidity . . try to clean it up with smooth paint brush over the boards and connectors . . better yet spray some contact cleaners i think this will do . . . otherwise resolder is needed . .

Make sure you have the sub connected to the proper output on the receiver and no connections are damaged.
Then check the gain/level control for the sub. on the receiver...turn it up if it's down.
Make sure that in speaker setup, that you have the selection for a sub turned on.

onkyo .com

Not sure if this helps, but I just called Onkyo with a request for codes for the SR304. They said the only codes they have are for THEIR remote. Maybe they will work with yours. Here they are:
0276 0476 0810 1187 1376.
I tried these in the Comcast remote (adding a 3 in front of the numbers) but that didn't work. Still trying to get my Comcast remote to program the Onkyo SR304 adequately, since their published codes only partially work.

I know nothing about tivo but dvd player might need to be on bitstream to pick it up.I have to change mine when listening to music. hope this might help.

The manual on Page 10 says that with these modes (DVD,CD,MD,CDR,HDD) on the Remote you can control an Onkyo DVD player and CD/MD/CDR/HDD player/recorder.

For DVD, on page 12, it says to just push the DVD button (top right) and the following buttons will functions as stated.

ON/STANDBY button
This button sets the DVD player to On or Standby.

Number buttons
These buttons are used to enter title, chapter, and
track numbers and to enter times for locating specific
points in time.

DISC +/– button
This button selects discs on a DVD changer.

TOP MENU button
This button is used to select a DVD’s top menu.

Arrow [UP]/[DOWN]/[LEFT]/[RIGHT] & ENTER buttons
These buttons are used to navigate DVD menus and
the DVD player’s onscreen setup menus.

RETURN button
This button is used to exit the DVD player’s
onscreen setup menu and to restart menu playback.

Playback buttons
From left to right: Pause, Play, Stop, Fast Reverse,
Fast Forward, Previous, and Next.

SUBTITLE button
This button is used to select subtitles.

AUDIO button
This button selects foreign language soundtracks
and audio formats (e.g., Dolby Digital or DTS).

DISPLAY button
This button is used to display information about the
current disc, title, chapter, or track on the DVD
player’s display, including the elapsed time, remaining
time, total time, and so on.

CLR button
This button is used to cancel functions and to clear
entered numbers.

MENU button
This button is used to display a DVD’s menu.

SETUP button
This button is used to access the DVD player’s
onscreen setup menus.

RANDOM button
This button is used with the random playback function.

REPEAT button
This button is used to set the repeat playback functions.

PLAY MODE button
This button is used to select play modes on a component
with selectable play modes.

The default assignments for the digital INPUTs to Source names are:

OPT1= Video2
OPT2= CD.

If you have never changed them you should be able to select the PS3 by choosing Video2 and the 360 by choosing CD.

Or you could go into the setup routine on Page 33 of the manual and assign each digital input to a different 'function' that works better for you.

By the way, if you have the choice of coaxial vs optical cables on a given device the cheaper, longer and least sensitive-to-dirt-and-damage choice is coaxial - plain RCA cables. You can even extend them with Male-Female extender cables or split them with Y-cables for sharing one port with two devices or one device feeding two other devices (example: Cable Box-to-TV-and-Receiver). Just don't have two sources feeding one input turned on at the same time or they'll interfere with each other. Try that with optical cables.