20 Most Recent Pioneer DEH-P2900MP CD Receiver /AM/FM/MP3/ CD Player - Page 9 Questions & Answers

Wal-Mart Or Schoche.com has the Adapters that you need for this Repair. Please Rate my Solution, I need all the Help that I can Get! Thanks!

hi,

red to ignition of the car

yellow to positive terminal of battery

black to neg. terminal of batt.

the rest of wires to speakers (4)

Assuming that you checked the fuse, is there any wires in the area that are not connected and can you check them for power? If not, ground one side of your meter and take a wire and wrap around the other lead (set your meter for dc voltage) splice or wrap a straight pin onto that wire coming off the meter. Turn ignition on and stab wires until you get a voltage reading. The best wire would be the color wire coming from the radio fuse holder. But at this point you need power so which ever wire that gives you power splice it to power input of the radio.

Yes you are missing the red wire. You will see here in the wiring dia. in this link.

http://www.pioneerelectronics.com/pio/pe/images/portal/cit_11221/370967688DEHP2900MPInstallationManual1027.pdf

Good luck and please Rate FixYa!

if you hold the source button to long the radio will turn off .You should get dfferent choices when pushing the source button but don't hold the button down.Push and release quickly

Yes, your red wire is for ignition, yellow wire is for battery and black is ground. The red ignition wire is for the radio to turn off and on with the ignition. The yellow is always hot, for memory.

shut it off then hold the function button

Turn radio off then press and hold your knob in until you see a menu turn knob until you see the clock menu then set by moving knob up or down to change numbers and right or left to change hours, minutes or seconds. I hope this helps.

give me your email and ill send you the wire diag

on the radio and the adapter their is a spot for the cord that connects the two the ends have different colors on them it should be purple and black just make sure the colors are matched up if they are off it will still read all the info and say its playing but no sound will come out

I can't figure out how to set the clock it isn't even in the manual

Switch the ignition and battery wires.

what is the brand?

We can help you.Welcome to contact www.playpower.biz

OK A DOBLE A BATTERIE WILL HELP YOU TO IDENTIFY SPEAKERS YOU JUST APLY INTERMITANT POWER TO THE SPEAKERRS AND THEY WILL SOUND THEN YOU MARK IT AND KEEP CHECKING OTHER SPEAKERS AND DO THE SAME OR GO TO AUTOZONE.COM AND YOU SHOULLD BE HABLE TO FIN THE DIAGRAM THERE

ggg

There is no power from the rca jacks. Option 1; connect the speaker wires directly. Any aftermarket auto manual (Hayes, Clymer) with wiring schematics will let you know what wire is what in the dash. Option 2; RCA jacks output to an amplifier. There is no power coming from the RCA jacks. They have to be used with the amp. If you chose to use the normal speaker wires, be aware that these radios do not like stock speakers or wire. If you take the time and money to replace all of it, the head unit will last much longer. If you choose to use an amplifier, it will burn out fast unless you replace the speakers and wires immediately.

318lawless- these wires are the speaker outputs,the white is left front positive and the white with the black strip is left front negative. grey right front positive, the grey/black is neg. the purple is right rear,purple black neg.green is left rear,green black isneg. If you have any further questions let me know. cooltek Mar,3/08

Pioneer South Africa Distributor

Afritronics (pty)Ltd
29 Heronmere Road,Reuven
Johannesburg 2091,P.O.BOX 121
Linmeyer 2105,South Africa