JVC KD-NX5000 Car Video Player - Page 5 - Answered Questions & Fixed issues

I need to wire a plug for the back of a car radio jvc r-520 lost the original one have

I got this free Pdf manual from an online store for free and I don't think Ive visited a mechanic or fixya for help for more than 3-4 times out of the all the times I fixed the chipper in these 4 years

JVC Car Audio &... | Answered on Jan 30, 2019 | 73 views

2 Answers

How do you pair the Bluetooth on a jvc kd s29 cd player

Here is the manual on the JVC site if it helps:
http://books.jvc.com/booklist.asp?Model=kds29

JVC Car Audio &... | Answered on Jan 16, 2019 | 4,146 views

1 Answer

My jvc kd-dv7302 car headunit

JVC KD-DV7302 Head Unit
Need help the face was stolen of this unit n I'm trying everything I can to find a face for it...

JVC Car Audio &... | Answered on Dec 30, 2018 | 206 views

1 Answer

The stereo receiver I installed in my trucks loses power randomly while driving. It doesn't seem to be loose wiring, and I had it wired correctly.

When you switched the constant power and ignition signal wires, did it shut off while driving? I see you said it was wired correctly but It sound like a poor connection on one of those wires. Will the head unit turn back on again after shutting off while you’re driving?

Check back at the wire harness adapter and look at the connector pins. Make sure they’re all seated correctly and do the same at the head unit. If the factory radio never had this problem then it’s most likely what was recently added, harness adapter or connector pins/ crimped connection from pin to wire.

JVC Car Audio &... | Answered on Dec 20, 2018 | 49 views

1 Answer

How do I bypas the parking off error when l tried to play a dvd on a jvc kW-v21bt

If you are trying to watch a dvd while driving (which you shouldn't) and without setting your parking brake then you'll need to ground the parking brake wire in the harness for your head unit.

JVC Car Audio &... | Answered on Dec 12, 2018 | 970 views

1 Answer

Can I hook my phone to my jvc KD-s23

yes, if your Jvc has a Bluetooth capabilities. You can ask a vendor that sells phone to car stereo receiver. By the way, I will not trust a phone to car stereo cable connector. Most of them doesn't work

JVC Car Audio &... | Answered on Dec 03, 2018 | 73 views

1 Answer

I have a jvc cd receiver kd-lx300 it doesn’t turn on and gets really hot how can I fix this?

Go back and double check ALL of your wiring..If it's getting hot that means one or more wires ARE NOT hooked up correctly..

JVC Car Audio &... | Answered on Nov 12, 2018 | 85 views

1 Answer

Jvc TV (LT-55ue76) will get audio and video but will at times do full screen color flashes (red, blue, black, white, gray). Tried 2 other main board but still has same problem. any ideas?

You can get parts here. Look at the ribbon cables running from the T-Con board down to the connectors on the screen. The board itself is probably causing it but check the cables first. You can get parts online from here: TV Parts Universal TV Stands DLP Chips ShopJimmy

JVC Car Audio &... | Answered on Nov 03, 2018 | 64 views

3 Answers

My battery was recently disconnected and now my JVC KD-X341 BT doesn't work any thoughts on what I can do?

Check and make sure the ground cable is clean and tight on the battery.

JVC Car Audio &... | Answered on Oct 20, 2018 | 189 views

1 Answer

I am replacing an earlier JVC model with a JVC model KD-X33MBS. I am trying to match up the wires. There is one wire labeled as "illumination" not in my older model. What is "illumination" wire for?

Taking a flying guess the wire could have two possible functions - either providing the radio with additional illumination when the vehicle lights are on or if the illumination is permanent it could dim the display, etc. when the lights are switched on.

JVC Car Audio &... | Answered on Sep 02, 2018 | 74 views

3 Answers

None of the buttons are working on my JVC KD HDR60 radio. I hit the reset button and it stays in the demo mode - it plays the cd in it but I can't change anything - not even the volume

You probably have a bad switch on the face. If you have a switch that is letting any voltage through, the microprocessor assumes that it is receiving a command. The microprocessor can handle only one command at a time and locks up.

JVC Car Audio &... | Answered on Aug 24, 2018 | 3,398 views

1 Answer