JVC KD-NX5000 Car Video Player - Page 4 - Answered Questions & Fixed issues

It can be due to the lens of the player, or it can't take the command properly.

It is due to the bad connection to the battery or your battery can be weak and also check all the connections sometimes loose connections can cause sound, a weird sound.

https://www.helpowl.com/p/JVC/KD-G140/Research/1830?search=jvc%20kd%20g140%20wiring%20color%20code

You need to enter the security code to be allowed to use the unit!

https://www.manualslib.com/manual/692265/Jvc-Kw-R500.html?page=4

Hi Chembe, the regulator i.c is a 15pin, position IC901, part number R2S25400DS-E. Cheers.

Hi, there is no exact settings for your sound sysytem. There could be many reasons for the distortion on the front door speakers. best to find an certified car sound installer who will check your installation quality, and tune up the entire system according to your music selection style. Cheers.

download manual http://www.diagram.com.ua/english/catalog/eng-w-caraudio/j/eng-w-caraudio-j.php?row=660

The remote wire is usually blue. Make sure u do not use the blue for speakers. The remote wire should be in with the power wires.

Most car harnesses will correspond by Colour thus look out for an orange Colour from the pre-installed/ pre-selected wires.
Now the issue is, not all cars come with such wires pre-selected and installed ie bunched up with the Audio cluster, for such, you need to identify the wire yourself that connects to the light switch on your dash board and tap into it.

the accessory wire needs to work with the key turning. the battery wire connects to the battery. if you have a volt meter it can be very easy to find your wire connections in the fuse box. find the ignition fuse in the box set your meter to volts dc take your black lead to a chassis ground and the red lead to one side of the ignition fuse turn your key to accessory and see if you get 14 volts if you do get it thats your connection. if not try the other side of the fuse.

Press the "Hour" button (or right arrow button) to set the first and second digits of the code. Release the button once the four-digit code is accurately displayed. Press the "Mode" button to lock in the code you set. Turn the stereo deck on by pressing the "Source" or "Power" button to complete the reset.

+++++++++++++++++ https://www.manualslib.com/manual/1366811/Jvc-Kd-Sx870.html https://www.manualslib.com/manual/653487/Jvc-Kd-Sx870-Kd-Sx770.html

Sounds like one or more of your speakers are grounded out or just bad. Did they all play fine before. Check your wiring to make sure it’s correct

Most likely, your engine might not be producing the correct amount of voltage to your stereo system. It's most likely being over worked, or even your CD player needs to be cleaned. If it's the latter, try a quick burst of air duster.

https://elektrotanya.com/jvc_jr-s201_sm_en.pdf/download.html

moved you to JVC car auto systems from wrong computer forum. no model told fully.jvc.comask them for manualsgoogle for itin your country tell JVC where you live and what language you want to see./ http://www.jvc.com/

WHEN YOU ON A CALL YOU WILL SEE THE MIC VOLUME SETTING PUSH THE PLUS SIGN TIL VOLUME GOES

YOU COULD TRY PLUG THE RADIO IN AND ABOUT THE YELLOW WIRE YOU PUSH A GROND WIRE INTO THE PIN HOLE AND RADIO SHOULD WORK WHEN SECURE PROPERLY

SEEM LIKE U GET DEFICTIVE HARNESS