JVC KD-NX5000 Car Video Player - Page 2 - Answered Questions & Fixed issues

It is too cold for it to work properly. Check the operating temperature range in your user manual.

JVC Car Audio &... | Answered on Dec 21, 2020 | 13 views

Find and replace defective components.

JVC Car Audio &... | Answered on Nov 21, 2020 | 35 views

It can be due to the lens of the player, or it can't take the command properly.

JVC Car Audio &... | Answered on Jun 03, 2020 | 102 views

It is due to the bad connection to the battery or your battery can be weak and also check all the connections sometimes loose connections can cause sound, a weird sound.

JVC Car Audio &... | Answered on May 30, 2020 | 45 views


JVC Car Audio &... | Answered on May 21, 2020 | 53 views

You need to enter the security code to be allowed to use the unit!

JVC Car Audio &... | Answered on May 16, 2020 | 105 views


JVC Car Audio &... | Answered on May 10, 2020 | 81 views

Hi Chembe, the regulator i.c is a 15pin, position IC901, part number R2S25400DS-E.

JVC Car Audio &... | Answered on Mar 31, 2020 | 99 views

Hi, there is no exact settings for your sound sysytem. There could be many reasons for the distortion on the front door speakers.
best to find an certified car sound installer who will check your installation quality, and tune up the entire system according to your music selection style.

JVC Car Audio &... | Answered on Mar 31, 2020 | 123 views

download manual

JVC Car Audio &... | Answered on Mar 27, 2020 | 76 views

The remote wire is usually blue. Make sure u do not use the blue for speakers. The remote wire should be in with the power wires.

JVC Car Audio &... | Answered on Jan 13, 2020 | 99 views

Most car harnesses will correspond by Colour thus look out for an orange Colour from the pre-installed/ pre-selected wires.
Now the issue is, not all cars come with such wires pre-selected and installed ie bunched up with the Audio cluster, for such, you need to identify the wire yourself that connects to the light switch on your dash board and tap into it.

JVC Car Audio &... | Answered on Dec 10, 2019 | 854 views

the accessory wire needs to work with the key turning. the battery wire connects to the battery. if you have a volt meter it can be very easy to find your wire connections in the fuse box. find the ignition fuse in the box set your meter to volts dc take your black lead to a chassis ground and the red lead to one side of the ignition fuse turn your key to accessory and see if you get 14 volts if you do get it thats your connection. if not try the other side of the fuse.

JVC Car Audio &... | Answered on Nov 28, 2019 | 124 views

Press the "Hour" button (or right arrow button) to set the first and second digits of the code. Release the button once the four-digit code is accurately displayed. Press the "Mode" button to lock in the code you set. Turn the stereo deck on by pressing the "Source" or "Power" button to complete the reset.

JVC Car Audio &... | Answered on Dec 20, 2020 | 258 views

Sounds like one or more of your speakers are grounded out or just bad. Did they all play fine before. Check your wiring to make sure it’s correct

JVC Car Audio &... | Answered on Oct 13, 2019 | 131 views

Most likely, your engine might not be producing the correct amount of voltage to your stereo system. It's most likely being over worked, or even your CD player needs to be cleaned. If it's the latter, try a quick burst of air duster.

JVC Car Audio &... | Answered on Sep 26, 2019 | 133 views


JVC Car Audio &... | Answered on Sep 12, 2019 | 130 views

Not finding what you are looking for?
JVC KD-NX5000 Car Video Player Logo

Popular Tags

24 questions posted

Ask a Question

Usually answered in minutes!

Top JVC Car Audio & Video Experts

xxxxxx xxx

Level 3 Expert

5023 Answers


Level 3 Expert

85239 Answers

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

Are you a JVC Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides