20 Most Recent
Jensen's VM9312 Car DVD Player - Page 9 Questions & Answers
IPOD not being reconize by VM9312
I have the VM9312 and my screen keep going in and out, and it wont stop I cant even go back into the setup to try fixing it. What can or should I do
Jensen VM9412 Video BYpass
You can try the procedure for the VM9311TS model (the one I have) - I don't know if it'll work but it's worth trying. Put in a DVD, and let it start playing. Then hit STOP on the remote twice, and enter the code 1264. If you were able to see the actual movie at this point, you'd see a menu pop up. Push down twice, then ENTER. At this point the blue screen should clear and you should see the movie itself. You'll have other options on that menu, like a macrovision option to allow you to see burned DVDs. Set what you like, then on the remote, hit SYS SETUP twice to lock in your choices.
Burnt DVDs
Try this (this is the procedure for the 9311TS model, which I have, and it should be the same for yours too) - put in a regular movie, and do what you need to do in order to be able to watch the movie (cycle the e-brake handle, toggle a switch - however you have it set up). When the movie comes on, using the remote, hit STOP twice, then type in 1264, and a hidden menu will appear. This menu has the macrovision toggle - turn that on. While you're in there, you can also disable the parking brake bypass (turn the bypass on - no more e-brake handle or toggle switch!). Then hit the SYS SETUP button on the remote twice to save the choices you made, and you should be able to watch the burned movie then. You'll also find that it's nice to be able to just stick a DVD in and have it start playing.
Vm9312 pink wire
just go to the source screen, hit setup, then hit 5,4,3,2,1,0 on the remote control and a screen will come up. touch the hammer and screwdriver button on the left and it will have a thing called parking brake bypass and set it to on and click the x, this way it doesnt matter if u have the pink wire attached to anything.
[email protected]
Sub output
With RCA cables. Just plug into the preamp outputs on the back that are labeled for "subwoofer" and run them to your amp. In your on-screen EQ, you'll have a separate adjustment for the sub (which adjusts that set of preouts, without affecting the tone in the rest of the speakers).
Jensen vm 9412
If you have already done a recalibration on it, and it's still not working, I'm thinking the touch interface is hosed a little more than you can handle on your own - it may have to be sent out to be repaired. It seems like that right-side portion of the touch panel is just plain worn out. I don't really know of any other way to try and bring it back - you might contact a Jensen dealer and ask if there are any product recalls for such defects though - if this has happened on a large number of the head units, they may issue a recall or at least partial reimbursement for the cost of repair. At this point though, a service dealer will be your best bet.
Touch screen problems
the touch scree is a lcd it may get hott or dirty get a terrry cloth and gently wipe it down
Its for the 9412
Nope - the 9412 is capable of playback from only one source at a time.
Video
Here is the code:
I did this with the remote
Press stop twice(which is also the BAND button)
Press 1,2,6,4
Press down 1 time(button below the Play/Enter)
Press Play/Enter 1 time
(You should now see the menu)
Brake override should say No
I was told to change macrovision to No
Hit sys setup twice to save and exit
Hope it works like mine did!
Video
hook the pink wire to the ground
Just installed vm9312
go to the
radio press setup on your remote then press 543210, a secret screen will pop up press the hammer and skrewdriver,u will see brake overide put it on the on position,thenpress the X at the bottom of the screen,then your all set.
Car stereo
go to the
radio press setup on your remote then press 543210, a secret screen will
pop up press the hammer and skrewdriver,u will see brake overide put it on the on position,thenpress the X at the bottom of the screen,then your all set.
Sirius Tuner
Any Radio will work with Sirius if you use the FM feature and tune your radio to 107.1
No sound except for receiver
disconect the blue wire from the wireing harness and conect it with the blue with white u will not need the all blue wire
Vm9312 jensen dvd bypass
I just hooked the pink wire directly to the same ground spot as the head unit and it works fine
Ipod Video
This will never work, the new ipods will only work with apple products. I've had numerous headaches with this and after many phonecalls to manufacturers I discovered that the new ipods will only play video if they see an apple authentication chip embedded inside the video cable. Sorry.
Jensen VM 9311 iPod Classic
The new ipod will not work with anything other than 2008 alpine products. Apple embedded a chip in the actual cable that tells the ipod that it's ok to pay. What you need is an authentic apple video cable that can only be purchased at the apple store...then hook the inputs up to the video input on the radio.
No cd or cd track info
only certain cds have the track info on them. most cds will just come up as a track listing. some cd manufacturers put the track info on at production but most do not. try to burn a cd and label
all of the tracks as well as name the cd. if it does not show the names then something else might be up.
Not finding what you are looking for?