Top 20 Motorola Mobility H350 Wireless Headset - Page 5 Questions & Answers

go to connections - search for devices - select the device - the passkey is 0000

the default one is 0000..

I was able to use my Motorola H350 Bluetooth Headset on Windows 7 by installing the drivers found in this link: http://blog.komeil.com/2009/05/installing-bluetooth-headset-in-windows.html
Good luck! It took me about a week to find the solution.

passkey is of ur choice..
only remember that it must b same on both..
it can consist of a single digit to 4/6/8 digit(s)..
eg: if i u type '0' as ur passkey at ur bluetooth tp..u gotta give '0' to ur ph also..

very easy..
try to seek professional advice of ur system admin/vendor....

Hello,
you have to put it in pair mode. basically with the device turned off, press and hold the pwer button until the blue light remains steadily lit. then you can search for the device from your phone. the passkey should be 0000. good luck.
Thank You For Using FIXYA!!!!

0000 and OK

found it

Turn your phone's bluetooth on. Press and hold the call button on the headset until the phone detects it. When prompted for a password enter 0000.

You have to pair it with your cell phone or other device.

Here is the userguide

after you hold the button in and it flashes 2 or 3 times it is off

You are trying to connect your bluetooth to your computer using a USB cable? For what purpose? You can charge it that way in theory but is there something else you were trying to do?

here is one pin-out configuration

The pass code is six zeros not four.

poop on a stick

no there is not

Yes you can Motorola are pretty good at that sort of stuff. Just use the linke below and look on the left hand side lower down for the "Download User Manuals" link.

http://www.motorola.com/support/v/index.jsp?vgnextoid=e780462d3080e110VgnVCM1000008806b00aRCRD&vgnextchannel=248ae66506e9d110VgnVCM1000008406b00aRCRD

The default is almost always 0000 or 1234.

What type of phone do you have

try four "zero", sister in law just did it a few minutes ago and it worked for her blackberry

On your bluetooth headset, hold down the power button until the light stays on steady. (it will blink when you initially power it on, but continue to hold for another few seconds for the steady light!) Your headset is now in pairing mode.

On your RAZR, press Menu > Settings and Tools > Connections > Bluetooth > Handsfree > Look for devices. Your phone will then scan for any bluetooth devices that are in pairing mode. When your headset pops up on the list, highlight it and press ok to connect.

If the device asks permission to bond with the phone, select yes. It will then prompt you for a pin code. The pin will be 0000 .