20 Most Recent Linksys SPA941 IP Phone - Page 2 Questions & Answers

Frontier Router Login at the bottom of the Network Connections window, just below the address bar. Select Wireless Properties from the menu. Locate the Network security key field on the Security tab. You'll see your Wi-Fi network password if you click the box for Show characters.

You can use rj45 cable to it .

This seems to be a symptom of a configuration error, which can be fixed by resetting the router to factory default. Do this by finding the (often partially hidden) reset button on the device, and pressing and holding down the button, with the power on, till lights start flashing on the router. Let go of the button and allow the router to reset (can take a minute or two). You will now have reset the router to factory default. To connect to your ISP, you'll need to enter your account details (and any other specific information) provided to you by your ISP. You will also have to set a name and password for the wifi section of your router (if it has wifi) if you don't want it to be freely accessible by everyone within wifi range.

Disconnect the power to it, wait 5 minutes and power back on.

Read this discussion

Internal error - code 302 on setup - Linksys Community

just fixed one yesterday. the power pack was no good.AC wall wart, power green LED blinked endless. and the white logo, LED is dead.. a new pack fixed it. also the wrong pack used, ! do not mix them up. oops. first year 54G, v1 uses 5vdc pack. at v2, and up all want to 12vdc pack, bottom sticker on above failed was v6. you said recognized, does that mean the 4 rear Ethernet wired jacks are dead, or just wifi dead.? first the ethernet ports must work, or wifi is doomed.

Good day, This might be of help . Steps To Fix Linksys Router Error 321:- Step1:- Check the Firewall Settings To check the Firewall Settings is the first priority for the users. Then check the firewall settings of the computer/ Laptop, will be helpful to find the problem. If there is any firewall installed on the computer, so the users need to turn it OFF.During the process, the users ensure that the Local Area Connection on the computer is not disabled. The Local Area Connection should not have any static IP address assigned. If there is any then the users need to immediately set the IP address to automatic. Method2:- Run the Installation CD Again:- The users require trying to run the CD again and ensure when the CD runs, it will ask to connect the computer and the modem to the router with the cable. So the users will need to notice, that there all the lights lit up on the router. If it's not, then users will need to setup their router without the CD. The users can get the instruction to setup router manually in the method 3. Step3:- Try to Setup Router Without Installation CD Setup Linksys Router without Installation CD is another best option for users in order to completely avoid the in order to fix Linksys Router Error 321. Follow the below-given instruction to Setup Linksys Router without Installation CD: First of all, connect the main computer to the Ethernet port on the router. Then the users need to connect the modem to the Internet port on the router. Now it's time to verify the status of the light that is blinking properly. Next, users need to open the setup page of the Linksys Router and then change the Internet connection settings manually. In the setup page of the Linksys Router, the users can change the settings of the router as per their needs. Then the default IP address of many Linksys router is 192.168.1.1. And the default username and password would be an "admin". Wait for a few minutes, when the main computer is able to access the Internet, so users need to create a wireless network for their wireless computers/devices. or you can call them @ Toll Free 1-800-204-6959 that is Lynksys support.

Setup helps

The vent actuators are bad. there should be two. one on each side. they are small toy like motors that open and close the vents from within to allow the hot air to blow by closing the vents to the a/c unit.

Which Linksys model of router? What cable service? What did they say needed to be configured? https://www.linksys.com/no/support-article?articleNum=142912

You can get best linksys router support phone number at Toll Free Number ( 1-877-769-0969 ). Linksys router Tech Support number ( 1-877-769-0969 )

DO NOT CALL FAKE NUMBERS OR GO TO FAKE WEBSITES

Your message does not qualify as a question or query for a problem, try somewhere else DO NOT MAKE THIS SITE WITH YOUR GARBAGE Take your GARBAGE to another Side Your message qualifies as SPAM

Laliren, Your message does not qualify as a question or query for a problem, try somewhere else DO NOT MAKE THIS SITE WITH YOUR GARBAGE Take your GARBAGE to another Side Your message qualifies as SPAM

Anita, Your message does not qualify as a question or query for a problem, try somewhere else DO NOT MAKE THIS SITE WITH YOUR GARBAGE Take your GARBAGE to another Side Your message qualifies as SPAM

configure connected Cisco Port to Linksys Router interface that connects to linksys router has to be configured with an ip address and made active https://www.cisco.com/c/en/us/td/docs/routers/access/800M/software/800MSCG/routconf.html then a static route has to be set up to tell cisco that the linksys router ip address is on the port you connected it to . https://www.cisco.com/c/en/us/support/docs/dial-access/floating-static-route/118263-technote-nexthop-00.html

DO NOT MAKE THIS SITE WITH YOUR GARBAGE Take your GARBAGE to another Side Your message qualifies as SPAM

Power-off & power-on the router, to reset it. Otherwise, the router is capable of 1 Gigabit (1000 Megabit) throughput, so it should _not_ be the "bottleneck" (unless you are paying your Internet Service Provider for speeds faster than that!!!)

In this Globalisation, using router has become an important need of the users. It becomes an important asset for running the business and even for the household purpose. Linksys is the better networking device for the users according to the current demand. With the help of it, users may expect the prompt service with any major interruption. It is the fact that it has been according to the preference of the users but there are certain issues for which the individual may expect instant help. For getting help at the time of urgency, users could contact the support team. Several issues are there for which the individual may expect help but here one could see the solution for one: What is the method to upgrade Linksys router firmware? •First users need to get the wireless router model number and version number •Users need to download the latest Linksys router firmware •It is now required to take the backup of Linksys wireless configuration •Individuals now need to upgrade the latest Linksys router firmware •From there users should look that whether the problem get solve or not For any kind of technical help during the process contact, Router Technical Support team to get an instant solution. They are available 24/7. Call Now ?+1 888 597 3962 for any Support. More Info - https://www.quickhelps.co/phone-number/linksys/

Which Linksys router do you have? Model number. What error message do you get? try to connect the computer to the router with the ethernet cable and login to Linksys router setup page. Check the internet connection settings. Linksys router login