20 Most Recent Kenwood KAC-9103D Car Audio Amplifier - Page 8 Questions & Answers

0helpful
3answers

Whenever I step on the brakes, my car's stereo system turns off. I've done all I can, and am now looking for help please.

Hi Trey, i understand that you not a technician, what i do advise is to first get your head unit bench-tested, have all the output channels and currents checked thouroughly. If that doesnt sort the problem then try a different head unit as a process of isolation. If the problem still persists with a new head unit, then the problem is definitely with the points of connection from the head unit, OR you may have a weak battery. The amplifier will not bring on a miswire fault in the head unit. Cheers.
3/30/2020 2:31:22 PM • Kenwood Car... • Answered on Mar 30, 2020
0helpful
2answers

Kenwood car amp protection light is on stays on how do i reset it or get it to tirn off?

NO KENWOOD amp model stated at all (vast there are) wild guess speaker or wires to them shorted or open.
2/29/2020 7:12:54 PM • Kenwood Car... • Answered on Feb 29, 2020
0helpful
1answer

Could anyone assist where the din input colour code wires connect to on a kenwood 4300 equaliser

get the manual? on it? yet? RTM . typed the number wrong , kenwood KGC4300 equalizer WANT DIN PLUG PINPUT. on IS THIS A CAR RADIO AND YOU LEFT OFF THE KGC4300 THAT IT/? 35 years old today, that? 1985 made ! Be nice for you to first tell what it is. how used, in car? home stereo or what? who hard to find, the KGC4300 , DIN cable lost. # of EQ Bands: 5 - Equalizer Features: Subwoofer Output, Fader Control yes it has a DIN plug cable set with it , new but you lost it/ Id trash it but the service manual is here. https://www.ebay.com/itm/Kenwood-kgc-4300-service-manual-original-repair-book-stereo-car-radio-eq-amp/123728129201?hash=item1ccec56cb1:g:zF4AAOSwkm9az4c7 the only other 2 ways to fix this is buy the cable and last find a rare schematic of this EQ. boxl. here is the schematic. https://www.user-manuals.com/circuit-diagrams-KENWOOD-KGC4300.html
2/29/2020 12:49:41 PM • Kenwood Car... • Answered on Feb 29, 2020
0helpful
1answer

What can I do to my kenwood kdc138 is writing dcer

the amplifier of the tape is dead or it need service
2/25/2020 1:04:59 PM • Kenwood Car... • Answered on Feb 25, 2020
0helpful
1answer

Connect stereo kenwood DNX6140 to my tahoe 2002 but the subwoofer function doesn't work that I recommend

There is a setting that turns off and on the subwoofer
1/7/2020 6:06:57 AM • Kenwood Car... • Answered on Jan 07, 2020
0helpful
1answer

Connect a kenwood DNX6140 stereo to my 2002 tahoe but the subwoofer function doesn't work what can I do??

I think there is a switch to go from output 3+4 to subwoofer
1/4/2020 3:06:14 AM • Kenwood Car... • Answered on Jan 04, 2020
0helpful
1answer

My kenwood kac-521 excelon amp stopped workink has power fuses are good tried resseting when i push the reset button it only fashes and turns off again

Make sure ground and power to the AMP are perfect (clean and tight). Afterwards unplug all the speaker wires and/or RCA speaker connections. Does the light still flash and power down after it is reset? If so, the AMP may be damaged. If not, then one of your speaker wires are shorted. Plug one speaker in at a time. One of them should cause a negative reaction.
12/18/2019 4:48:21 AM • Kenwood Car... • Answered on Dec 18, 2019
0helpful
1answer

Kenwood DDX4015BT has blue screen and shows "no navigation" everything else works. Any idea?

VIDEO CARD READER OF UNIT IS BAD YOU HAVE TO FIND A TECH SUPPORT WITH KENWOOD TO FIX
11/29/2019 3:44:21 AM • Kenwood Car... • Answered on Nov 29, 2019
0helpful
1answer

Can't get power to head unit kenwood dnx 7100

check all the wiring at te back the push and hold reset button for ten second and try power again
11/5/2019 3:24:03 AM • Kenwood Car... • Answered on Nov 05, 2019
0helpful
1answer

F 3 error code kenwood ac

push and hold rest bull with a small pin and the unplug unit for ten second then try power up again
11/5/2019 3:21:37 AM • Kenwood Car... • Answered on Nov 05, 2019
0helpful
1answer

I just bought a Kenwood radio from another person not a dealer and I don't have a security code for the Kenwood 6140 the person I bought it from doesn't know either

Typically those car radios have an embedded (on circuit board) chip which is a flash EEPROM type memory. And this chip stores data which was programmed even if power is removed to the system. It also cannot easily be erased. They engineer this on purpose because any workaround to there anti theft system would defeat the purpose of having it so. Um I'm 99% certain without that code you basically have a brick which won't power on. And nothing you can do can change that. Perhaps and engineer or something could replace the chip or I have heard of ways to wire in and basically short certain leads causing the chip to delete it's memory without actually destroying it but that is engineer level stuff. Buyer beware I would definitely get a refund on that. A quick Google search of Kenwood 6140 password comes up with this to confirm what I already know about this technology. Also with 4 digits there are 10000 different combinations. https://www.manualslib.com/manual/705744/Kenwood-Dnx6140.html?page=74
10/31/2019 10:51:02 PM • Kenwood Car... • Answered on Oct 31, 2019
0helpful
1answer
0helpful
1answer

2006 sartun Vue what wires color it into a Kenwood kdc-x789

R u speaking english?
10/16/2019 9:26:37 PM • Kenwood Car... • Answered on Oct 16, 2019
0helpful
1answer

To change kenwood 313 stereo from japan to english

+dealer
10/13/2019 12:52:38 AM • Kenwood Car... • Answered on Oct 13, 2019
0helpful
1answer

Kenwood car stereo older type works but no sound has v-off when you push buttonsdont have book cannot change to v-on ?

Hi John Anderson, indicate the model of the Kenwood stereo that you are commenting on, in order to find the best possible solution I wait your answer Regards Franco Dosil Hola John anderson, indica modelo del est?reo Kenwood que estas comentando, para poder encontrar la mejor soluci?n posible Espero tu respuesta Saludos Franco Dosil
10/9/2019 2:43:18 AM • Kenwood Car... • Answered on Oct 09, 2019
Not finding what you are looking for?
Kenwood KAC-9103D Car Audio Amplifier Logo

Popular Tags

28 questions posted

Ask a Question

Usually answered in minutes!

Top Kenwood Car Audio & Video Experts

xxxxxx xxx

Level 3 Expert

5117 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you a Kenwood Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Kenwood Car Audio & Video

  • Kenwood Car Audio & Video

Most Popular Question

no sound

  • Car Audio & Video
Loading...