yellow--battery + red--accessory black-ground blue-antenna blue/white-remote lightgreen-praking brake white==left front spk- + white/black left front - gray-right front-+ gray/white right front- green=left rear- + green/black left rear - purple= right rear + purple/white rear- brown-mute{if equip} orange/black -illumination orange- dimmer purple/white- reverse camera input

Read full answer

3/5/2019 2:12:44 AM • Kenwood Car... • Answered on Mar 05, 2019

0helpful

1answer

Locate reset button on Kenwood ddx512

push and hold botton with red light at top left corner for ten second ubit should reset

Read full answer

3/5/2019 1:56:14 AM • Kenwood Car... • Answered on Mar 05, 2019

0helpful

1answer

How do you reset the Kenwood KRFV5030D

turb power on and push reset for 10 second

Read full answer

3/5/2019 1:53:33 AM • Kenwood Car... • Answered on Mar 05, 2019

0helpful

1answer

What is the IC number for kenwood kdc-u259

best way to get you have go on kendwood site and talk to tech support

Read full answer

3/5/2019 1:48:24 AM • Kenwood Car... • Answered on Mar 05, 2019

0helpful

1answer

I have a kenwood ddx790 when i try to eject the disc in it the eject button brings up the phone, no button opens the face but in settings the tilt the angle thing works. any ideas out there?

push ecject on the screen it take afew sec to open

Read full answer

3/5/2019 1:47:27 AM • Kenwood Car... • Answered on Mar 05, 2019

0helpful

1answer

How can I do a factory reset on a Kenwood stereo

what model

Read full answer

3/5/2019 1:43:38 AM • Kenwood Car... • Answered on Mar 05, 2019

0helpful

1answer

How to fix Kenwood RX-29 protect mode??

disconnect all the speaker wires and power up back the unit and then press reset button at top left corner for ten second..

Read full answer

3/5/2019 1:42:58 AM • Kenwood Car... • Answered on Mar 05, 2019

0helpful

2answers

Kenwood 6020dnx shows DC offset error ONLY AFTER I started the car.. before it was playing music fine. When I started the car it showed the message

That error is normally a shorted speaker wire but starting the car won't cause that. Possible problem could be the dimmer wire was used as a ground by mistake. Lights come on when the car starts. Another is too high of voltage. Car rests at 12 volts but is around 14 when running. Was there a plastic piece on the red or yellow wire that got cut off during the install? They have a resistor inside that keeps the voltage down.

Read full answer

3/3/2019 12:14:32 AM • Kenwood Car... • Answered on Mar 03, 2019

0helpful

2answers

Is their other harness connects fit kenwood kdc mp228 cause my harness the I'm missing some red and black and yellow wires from wiring harness

kenwood cd player pinout points-ue4hlgd00wn3h2txlnime0ky-5-0.gif

Hi, this picture resembles the harness(connecting plug) looking in from the back of the harness. The red wire goes into the A+ point. the black wire goes into the Gnd point. The yellow wire goes into the B+ point. if you not sure how to read this picture please ask the help of an installer. Cheers.

Read full answer

3/3/2019 12:05:48 AM • Kenwood Car... • Answered on Mar 03, 2019

0helpful

2answers

Hi. I've got Kenwood KAC-704EX and when the system turns on, there is a blinking red triangle and unit doesn't work. What should I check or do, please?

YOU SHOUL CHECK YOU BATTERY AND GROUND AND REMOTE SOURCE MAKE SURE THEY ARE CONNECT PROPERLY

Read full answer

3/2/2019 11:49:24 PM • Kenwood Car... • Answered on Mar 02, 2019

0helpful

2answers

Hi what is the output mosfet number for Kenwood KDC-U456

Hi Dalitso, the sound output ic, or the ic that drives the sound to the speakers for this model is TB2931HQ. Cheers.

Read full answer

3/2/2019 11:39:01 PM • Kenwood Car... • Answered on Mar 02, 2019

0helpful

1answer

Password bypass for Kenwood excelon ddx812

USUALLY THERE IS NO CODE BUT IF U PURCHASE USE YOU HAVE GET CODE OR TURN KEY AND PUSH RESET BUTTON FOR TEN SECOND THEN TURN OFF AND TRY TURN ON

Read full answer

2/19/2019 1:49:58 AM • Kenwood Car... • Answered on Feb 19, 2019

0helpful

1answer

I have a Kenwood dnx570hd all of a sudden I heard a high-pitch sound and lines were running through my touch screen now it will not power up is a head unit shot

YOU TO REPLACE SCREEN ON UNIT

Read full answer

2/19/2019 1:03:08 AM • Kenwood Car... • Answered on Feb 19, 2019

0helpful

1answer

My kenwood kdc-mp342u is in protect mode and i cant get it to reset

UNPLUNG THE UNIT WAIT TEN SECOND THE PLUG BACK IN

Read full answer

2/19/2019 1:01:35 AM • Kenwood Car... • Answered on Feb 19, 2019

0helpful

1answer

I need a wiring diagram for a kenwood cd receiver kdc-448u

Red..accessory
Yello..constant...battery..
Black..ground..
Blue/yellow ...steering ..
Blue/white..remote..
Blue..antenna..
All speaker wire wuth black..negative..
All solid color is positive

Read full answer

2/13/2019 12:40:48 AM • Kenwood Car... • Answered on Feb 13, 2019

Not finding what you are looking for?

Popular Tags

hook 4ohm subs

28 questions posted

Ask a Question

Usually answered in minutes!

Are you a Kenwood Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Have a manual for Kenwood KAC-9103D Car Audio Amplifier? Or just drag it here!

View Most Popular

Kenwood Car Audio & Video

Kenwood Car Audio & Video

no sound

Car Audio & Video

20 Most Recent Kenwood KAC-9103D Car Audio Amplifier - Page 10 Questions & Answers

Where can I get user manual for kenwood midi stereo system

David is my name, how do i set my car stereo to 4 channel output,,some help would be fantastic thank you.

I have a kenwood ddx4016 that is asking for a security code since i disconnected the battery and i have never set. Is there a way around this ?

I have a kenwood ddx4016 that is asking for a security code since i changed my car battery. I have never set a code so dont have one to put in. Is there a way around this ?

How do i hook up my vr407 to my kenwood cd player and my tv

Wiring diagram for Kenwood kdc'148

Locate reset button on Kenwood ddx512

How do you reset the Kenwood KRFV5030D

What is the IC number for kenwood kdc-u259

I have a kenwood ddx790 when i try to eject the disc in it the eject button brings up the phone, no button opens the face but in settings the tilt the angle thing works. any ideas out there?

How can I do a factory reset on a Kenwood stereo

How to fix Kenwood RX-29 protect mode??

Kenwood 6020dnx shows DC offset error ONLY AFTER I started the car.. before it was playing music fine. When I started the car it showed the message

Is their other harness connects fit kenwood kdc mp228 cause my harness the I'm missing some red and black and yellow wires from wiring harness

Hi. I've got Kenwood KAC-704EX and when the system turns on, there is a blinking red triangle and unit doesn't work. What should I check or do, please?

Hi what is the output mosfet number for Kenwood KDC-U456

Password bypass for Kenwood excelon ddx812

I have a Kenwood dnx570hd all of a sudden I heard a high-pitch sound and lines were running through my touch screen now it will not power up is a head unit shot

My kenwood kdc-mp342u is in protect mode and i cant get it to reset

I need a wiring diagram for a kenwood cd receiver kdc-448u

Not finding what you are looking for?

Popular Tags

Ask a Question

Popular Products

Kenwood KDC-MP235 CD Player

Kenwood KDC-MP228 CD Player

Kenwood KVT-617DVD Car DVD Player

Kenwood KAC-9152D Car Audio Amplifier

Kenwood KDC-135 CD Player

Top Kenwood Car Audio & Video Experts

xxxxxx xxx

Marvin

The Knight

Are you a Kenwood Car Audio and Video Expert? Answer questions, earn points and help others

Manuals & User Guides

Kenwood Car Audio & Video

no sound