Amerock 3 Ring Knobs - BP1586 - Page 7 - Answered Questions & Fixed issues

sounds like it is wired incorrectly. I will need model number, what voltage is your pump, what voltage is your timer. who replaced timer, who installed timer?

Even though today was the first time that I have seen this blog, I have to say it really impressed me..thank you! retro bowl unblocked

Noma can include several different brands Information appears on following links: http://waterheatertimer.org/How-to-set-timers.html http://waterheatertimer.org/Woods-timers-and-manuals.html

Your new one needs the newer 220 volts supply. https://ask-the-electrician.com/wiring-options-for-a-kitchen-oven.html https://www.google.com/search?q=wall+oven+consists+of+4+wires+white+red+black+and+green ..

No take them out. I have had a lot of issues lately with Duracell batteries leaking. Wrap them in paper, or use them through the year in other devices and use new ones next year.

Replace timer, it is defective and non repairable.

Hi all. I have the same problem with PF1102. It was working and turn the pump on and off, but it suddenly stopped doing it. That means the wiring is correct. Also, the timer (clock) is moving and show the correct time. I have to manually turn on and off the whole system to run it for couple of hours. I think I just need to replace the timer part. Please advise.

It is a toy that has 2 plastic bottles and 2 plastic cans and an infrared gun. You set the cans and bottles on the buttons that are pushed down and shoot with toy infrared gun and they pop up and shoot the cans and bottles off

To set the timehold down the TIM button until Day flashes, Use +/- to adjust then hold down time until hour flashes..Repeat until set.

To program,
1. hold down prog until the cursor starts to flash at 12:00
2. Press PROG to advance to the day or day group you want to program.
3. press + to advance the cursor to the desired ON time
4. press mode until display reads "on"
5. use the + to move the cursor to the desired ON duration? Clock shows this also.
6. press mode until "off" is displayed. then advance the cursor thru the period the outlet should be off. (stupid to have to do this!)
7. press MODE to select as the ON or OFF period(!)
8. press TIME to exit programming.
9. Press PROG again to program another set of days.

Stupid system.
Good luck.
Dave

I have a house full of those. The wiring instructions show the use of Wire Nuts / Marrets. https://www.google.com/search?q=dimplex+baseboard+heater+wiring ..

https://manualzz.com/doc/en/5296545/upm-et420c-owner-manual

That model doesn't appear in search. Often the instructions are embossed in the back. Hard to read, but they are there. The 8814 might be lose enough? My Photocell Timer only has one button. It come on at Dusk and the Button tell how many hours to stay on. My two button one has Mode and Hours. Press Mode for On time. Press Hours for hour to come on. Press Mode. Press Hours for how many hours on? Press Mode one more time to set. https://www.google.com/search?q=052-8819-2+manual ..

What brand of timer is it? Smiths, Time*?

hi find link for user manual https://manualzz.com/doc/en/1512703/schumacher-electric-mc-1-owner-s-manual

hi Good News you can find Seiko Digital Watches Instruction manuals from http://SeikoDigitalWatches.com its very good site about Seiko Watches.

hi That model timer is not identified at Ingram. Copy following links: http://www.ingramproducts.com/Timers-Analog_Timers.html http://www.ingramproducts.com/Timers-Digital_Timers.html Add a comment and describe the timer in detail for more help. If you need further help, I'm available over the phone at https://www.6ya.com/expert/gene_9f0ef4df2f9897e7

the display will not lighted . When you press settings or temp it should come and go off. https://www.manualslib.com/manual/656641/Aube-Technologies-Th104.html

Question edited for clarity and to what I think you meant to say. Correct model of timer added 'Coronet'. Question moved from Computers category to Timers - Hardware. The wall skimmers probably moved the settings for some reason, possibly to stop the plaster setting too fast. Here is your manual. https://www.bristol.gov.uk/documents/20182/34400/Horstmann%20425%20Cornet%20Timeswitch.pdf/0e1f2f84-8a15-44e4-a702-187f88e46b1e ..

Difficult to say when you are Anonymous, I can't check your posting history, but I think you are seeing 'Suggested Answers' that Fixya thinks might be useful to you. This happens all the time. Anyway, your Noma Timer is made by Woods. It does on have one button purely because it is a photoelectric timer. It comes on when it get dark, so it needs no On or Start button. Your single button sets the number of hours the power stays on. So, if it gets dark at 5:00 pm, and you want the lights to go off at 11:00 pm, you press the button 6 times until you see '6' in the display. That's it. it will turn on at 5:00 and turn off 6 hours later at 11:00 pm. You CAN'T set it to come on at 4:00. It will only come on when it gets to a certain light intensity at dusk. For that, you need the two button version, which has Mode and Hours. . Here is the manual. If you look carefully, the instructions are usually embossed into the back of the timer. Make sure the photocell is facing outwards and is not covered by greenery. http://waterheatertimer.org/pdf/Woods-49103-N1502-manual.pdf https://www.google.com/search?q=Noma+N1502+timer ..

https://www.manualslib.com/manual/1053173/Woods-N1502.html