20 Most Recent Pacific Laser Systems PLS5 Automatic Laser Plumb Level And Square Questions & Answers

one of the problems with this type of equipment is the fact that the down beam has to be set to a true plumb position. If it is possible to swing the head without disturbing the mounting you can check for circling - motion of the down beam in a circular pattern - which indicates off plumb placement.

Pacific Laser... | Answered on Dec 27, 2017

Simple answer, you cant. The PLS hand held lasers are not designed to be opened, or repaired. You will have to remove a decal to get the screws to open it, and doing so will mean the laser wont be sealed anymore. They are very susceptible to dust and debris. You can get it replaced with a PLS etn, from a PLS retailer. For free if you're under warranty, and for a reduced cost, if your not.

Pacific Laser... | Answered on Sep 06, 2015

Gendron's in Spokane Washington
They did a perfect job on my laser transit

Pacific Laser... | Answered on Mar 25, 2011

The green LED on top is the power indicator. The PLS5 has 5 optic windows that should produce beams. Do Not look into the windows to see if there is a beam. Place your hand in front of each window. If there is no beam from any of the windows the unit is malfunctioning and requires service by an authorized service center. PLS states that there is NO service or repair that can be performed by the consumer beyond replacing the batteries and cleaning the optic windows This unit has a 1 year warranty from PLS.
Here is a link to the manual
and to their contact page.

Pacific Laser... | Answered on Jan 04, 2011

Hello barr..... Sometimes the culprit is corrosion of the battery contacts within the device. Remove the new batteries and use the eraser end of a common pencil to "scrub" the contacts until they are shiney clean. Then use a small flat blade screw driver to move those contacts a wee bit further out in the battery compartment to assure excellent contact. Finally, test those "new batteries" to be sure they are indeed charged fully. Joe

Thanks for choosing Fixya!

Pacific Laser... | Answered on Dec 16, 2010

Not finding what you are looking for?
Pacific Laser Systems PLS5 Automatic Laser Plumb Level And Square Logo

29 questions posted

Ask a Question

Usually answered in minutes!

Top Pacific Measuring Tools & Sensors Experts

Vuk B

Level 3 Expert

717 Answers

Brad Brown

Level 3 Expert

18225 Answers

Tom Chichester

Level 3 Expert

55379 Answers

Are you a Pacific Measuring Tool and Sensor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Pacific Measuring Tools & Sensors

  • Pacific Measuring Tools & Sensors

Most Popular Question

jus turn

  • Measuring Tools & Sensors