20 Most Recent Dewalt 18 Volt Compact Drill Kit Questions & Answers

it very economical to repair the drill. replace the transmission.

Dewalt 18 Volt... | Answered on Feb 02, 2019

open the chuck all the way and then look down in the centre of the chuck you should see a cross head screw
unscrew and the chuck should pull out as this is on a taper system ( note the screw is left hand thread )

Dewalt 18 Volt... | Answered on Jan 23, 2018

it is most likely stripped out and will need to be replaced

Dewalt 18 Volt... | Answered on Aug 19, 2016

I simply placed the chuck into a large vise and turned the drill counter clockwise and the chuck spun right off no problem without damaging anything!! It does have some thread lock on the chuck but just use your man strength and its as simple as turning the lid off the pickle jar! Do not waste your time or money with the removal tool...YOU DONT NEED IT!

Dewalt 18 Volt... | Answered on Mar 28, 2016

What is the residual voltage on your battery, if it is too low, charger will not engage. If the voltage is below the threshold allowed, simply jolt the Nickel Cadmium battery with a car charger to bring it up, then install on charger.

Dewalt 18 Volt... | Answered on Aug 14, 2015

DEWALT DW958 Power Tool Battery ReplacementType: Ni-MHVolt: 18VCapacity: 3000mAhColor: BlackWeight: 1160gDimension: 136.80x85.43x113.00mm



Dewalt 18 Volt... | Answered on May 20, 2015

Open the chuck jaws and you will see a screw in the center of chuck, it is left hand thread. remove it and use a large bent handle allen wrench putting the short portion in the jaws and tightening. Shift the drill to the low position and have the clutch in the drill only position. place the handle of the wrench at about a 30 degree angle to strike it counterclockwise. put the chuck on a block of wood or workbench and hit it, this might take a couple times but it will come off. Let me know if you still need help

Dewalt 18 Volt... | Answered on Jan 04, 2015

go to www.dewaltservicenet.com
shearch by model DW911 loock the break bown

Dewalt 18 Volt... | Answered on Feb 20, 2014

If it is a keyless chuck, try resting the chuck on a wooden work bench, and with a dead-blow hammer aka: shot hammer, slant-strike the chuck in the unscrew direction.

Dewalt 18 Volt... | Answered on Dec 16, 2013

The speed switch on top may be in between speeds. Try it in a different speed. If not the top switch, the the trigger may be bad. Does reverse work?

Dewalt 18 Volt... | Answered on Dec 06, 2013

Not finding what you are looking for?
Dewalt 18 Volt Compact Drill Kit Logo

245 questions posted

Ask a Question

Usually answered in minutes!

Top Dewalt Drills Experts


Level 3 Expert

85239 Answers


Level 3 Expert

1997 Answers


Level 3 Expert

4372 Answers

Are you a Dewalt Drill Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Dewalt Drills

  • Dewalt Drills

Most Popular Question

dw997 stopped working rotates ok

  • Drills