20 Most Recent
Questions & Answers
Night vision camera dark
IF VIDEO WAS OK AT SOME PONT IN PAST, THEN CAMMERA BUILT IN ILLUMINATOR HAS GONE BAD (LIGHT BULBS BURN OUT YA KNOW) IF VIDEO WAS NEVER GOOD FROM START YOU HAVE ASKED TOO SMALL A ILUMINATOR TO ILUMINATE TOO LARGE AN AREA , ADD MORE ILUMINATION TO AREA OR REDUCE OBJECT RANGE THAT CAMMERA TRIES TO SEE
I am not able to view my business from home
When you are at business, you are probably accessing the network locally.
When you reach home, you are accessing it via internet.
What you need to do is to set up the router to direct the incoming requests to the dvr ip address. It is called creating a virtual server.
You may want to subscribe to a DDNS service if your ip keeps changing. Businesses normally have a static ip but not if you have a normal dsl connection.
If you own website, add
to watch your cctv for $1/day
How to reset house alarm after power cut
alarm may be in battery back up mode when power is lost it will automaticly start running off these batteries that are usually located in the panel. diffrent devices have diffrent ways or restoring regular mode. i would contact the maker.
System will not connect
check the comm cable between the computer and the device make sure that all settings are correct like address, baud rate, comm port connection, and their may be a setting that controls how long the device will attempt to connect this needs to be disabled.
I have 2 lorex dvr's. both need web access, can it be done
there are a few ways to accomplish this. one way is you will need more then one static ip. one static ip for each machine, you will then be hitting them on the same port but different ip's. the simplest way is to change the web port setting in the lorex dvr from 80 to something else in the second machine.
Video not showing over internet
you need to supply more information. there are settings to control this feature but i would need to know information on your system like model number and how you have it hooked to the internet. web monitoring normally uses port 80, so if your hooked to a router you need to open that port to allow it to flow threw to the ip of the machine with the dvr card installed. if your not experienced with setting up networks or changing settings you will have a difficult time but i will try and help.
Not finding what you are looking for?