20 Most Recent Lorex SG6153 / Weather Resistant Mini Color Camera with Night Vision - Page 4 Questions & Answers

It most likely is the camera.

you need power to the red and black, white to a rc plug center pin yellow to the center pin of a rc plug and there should be a bare wire you need to split it off to the outside section of the yellow and white rc plug

You can contact lorex for firmware update and after that change the default password.

Model? Welcome to Lorex Support https://www.lorextechnology.com/downloads/security-dvr/LH100-Series/LH100_SERIES_MANUAL_EN_R2_WEB.pdf https://www.lorextechnology.com/store/?gclid=CIuWpK7Zm9YCFQe2wAodi6oBQQ https://www.lorextechnology.com/downloads/wireless-security-cameras/LW2232/LW2232_MANUAL_EN_R1.pdf

Coax from camera needs to feed vcr, at line in, line out from vcr goes to input of tv ie av1 av2 video in what have you. go that far and see if it makes sense.Then you can set vcr to record continuous and watch it at same time on tv or monitor.

Sorry those diagrams are not published to the web.

Check that your ip4 settings are correct

Foloow the link to the user manual. https://www.lorextechnology.com/downloads/security-dvr/LH300-Series/LH300_SERIES_MANUAL_EN_R2_web.pdf

I have no idea what it is you need to know??

If you wish to get some details; check the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/

remove the dvr cover and find the on board battery remove it for 10 sec and put it again while the power off

find the record button on the front of dvr and press it if not work you gonna need to format you HDD at setup setting of the dvr

IT NEED FOCUS THE LENS

IT MAY BE LIGHT REFLECTION IF NOT ITS PROBLEM IN THE CAMERA

TRY TO use microsoft windows explorer with low setting in the application