59.50 ERROR
alternates with
To continue turn off then on
A main motor (M1) error has occurred. Motor
operation is verified during device power-up.
1. Turn the device off and then on.
2. Verify that nothing is hindering the main
motor. If necessary, remove all paper
trays and the print cartridge, and then
turn on the device and listen for motor
operation.
3. Verify that the main motor is connected
to connector J407 on the ECU. (See
Figure 6-9 ECU wiring on page 195.)
You might have to remove the main
cooling fan to see this connection.
4. If the message persists, replace the
motor.
Part #
RK2-1488 Main Motor
11 questions posted
Usually answered in minutes!
31 Questions
15 Questions
13 Questions