20 Most Recent Konica Minolta magicolor 2500W Laser Printer Questions & Answers

YES

Self Help Product Support Konica Minolta Business Solutions Inc try this Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

replace the fuser unit Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

what error Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

then change the cartrdige Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

check the drum and print a menu or demo page from inside the machine. Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

do you mean drivers? because firmware is thru a secure Konica Minolta web site for dealership and KMBS tech, drivers try this site Self Help Product Support Konica Minolta Business Solutions Inc Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

check the media selection using metric like A4 and A3 paper or using 81/2 x 11 media check the paper draw settings and the print driver selection and printer properties. whipping lens does nothing does this happen when using a different draw or the bypass tray? Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Take belt out did you remove all the tape that KMBS applied. check the inst again. also reseat the belt properly. Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Clean the rollers with some small amount of soap and water fan the paper. replace paper use a differ draw or tray replace the rollers and sep pads Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

replace the black image unit. Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

You mite have a problem with paper setting or the draw settings. Could be that paper is set for metric size at the copier/printer and United States setting at the printer or vise a versa. Check to make sure that you setting are correct. DO the internal prints such as demo page and Network setting or counter page print OK if you have two draws print from different one or the bypass tray see if it changes? Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Well, there's something in the way of its operation, and it seems to be in the paper's transfer path. Go on and get that corona wire's shipping shield removed....

OK... YOU HAVE TWO POSSIBILITIES... EITHER THE LEVER ON THE TOP COVER BROKE OR THE ONE ON THE PRINTER CARTRIDGE...

IF ITS THE ONE ON THE TOP COVER THEN YOU NEED TO REMOVE THE LEVER HANDLE COMPLETELY AND GET A PLYERS AND USE IT TO TURN THE METAL THE LEVER IS ATTACHED TO OR FIGURE OUT WHERE THE THE LEVER GETS THE MACHINE TO LATCH AND USE A FLAT HEAD SCREW DRIVER AND SLIP THE LATCH... THEN CONTACT KONICA MINOLTA AND PURCHASE A NEW LEVER...

IF ITS THE TONER LEVER THATS BROKEN... YOU ARE GOING TO HAVE TO GET A PLYERS... TAKE A FIRM GRIP ON THE TONER AND REMOVE THE TONER IN THE SAME WAY THAT YOU WOULD IF THE LATCH WAS THERE... IF ITS BEEN PUT IN ODD THEN IT MIGHT BE STUCK... YOU MIGHT NEED TO USE A FLATHEAD SCREWDRIVER ON THE ENDS TO HELP THE PROCESS ALONG...

USER MANUAL I’m happy to assist further over the phone at https://www.6ya.com/expert/norman_d2fa496dce30c65d

Look up your model here to download the driver..
http://onyxftp.mykonicaminolta.com/download/Search.aspx?ht=