20 Most Recent Samsung CLX 3160fn All-In-One Printer - Page 9 Questions & Answers

0helpful
1answer

I replaced the black toner

If the print looks something like this with vertical fade bars:
slamfix_31.jpg
The problem is with the developer in the imaging unit. The problem can be fixed by either replacing the imaging unit for $100+ or you can fix it yourself by cleaning the imaging unit. You will need simple hand tools and if you are careful restore the print quality of your printer. I have a link to instructions that should help you http://www.fixya.com/support/r4120906-clean_developer_blades_samsung_clp_300 Hope this helps you.
2/8/2011 1:36:57 AM • Samsung CLX... • Answered on Feb 08, 2011
0helpful
1answer

My unit screen reads "Replace

I don't think clearing the counters will work for the imaging unit. Just like the toner cartridges, as each time the printer is used, it ticks off another count off the chip. And when the chip reaches full count, you will need to replace the imaging unit.
2/8/2011 1:18:12 AM • Samsung CLX... • Answered on Feb 08, 2011
0helpful
1answer

I have vertical lines that

If your printer prints with faded bands similar to this:slamfix_29.jpg The problem is with the developer in the imaging unit. The problem can be fixed by either replacing the imaging unit for $100+ or you can fix it yourself by cleaning the imaging unit. You will need simple hand tools and if you are careful restore the print quality of your printer. I have a link to instructions that should help you http://www.fixya.com/support/r4120906-clean_developer_blades_samsung_clp_300 Hope this helps you.
2/7/2011 6:48:55 PM • Samsung CLX... • Answered on Feb 07, 2011
0helpful
1answer

When printing, there is a

If your printer is printing with faded vertical banding like this.

slamfix_28.jpg The problem is with the developer in the imaging unit. The problem can be fixed by either replacing the imaging unit for $100+ or you can fix it yourself by cleaning the imaging unit. You will need simple hand tools and if you are careful restore the print quality of your printer. I have a link to instructions that should help you http://www.fixya.com/support/r4120906-clean_developer_blades_samsung_clp_300 Hope this helps you.
2/7/2011 6:20:18 PM • Samsung CLX... • Answered on Feb 07, 2011
0helpful
1answer

I have the Samsung CLX

you need to clean the laser unit of machine
2/5/2011 10:38:20 AM • Samsung CLX... • Answered on Feb 05, 2011
0helpful
1answer

"system error power cycle"

Disconnect the power cord and USB cable (or printer cable) for about 30 seconds then restart. That will usually clear error messages.
1/27/2011 4:25:21 PM • Samsung CLX... • Answered on Jan 27, 2011
0helpful
1answer

When I print with my CLX-3160FN there is a lighter

it may be the problem of your toner cartridge shake well and then reinsert it or try to check with another cartridge if it also doesnt solve your problem clean the laser unit
1/27/2011 11:41:52 AM • Samsung CLX... • Answered on Jan 27, 2011
0helpful
1answer

Hi...I am getting a message

the below videos will teach u
1/25/2011 9:36:55 AM • Samsung CLX... • Answered on Jan 25, 2011
0helpful
1answer

How do you scan to a usb in pdf

Hi there,

When you are exporting the document to a PDF it will ask you to select the file location. Select the location of your USB Drive and save it there. :)
1/24/2011 10:46:56 PM • Samsung CLX... • Answered on Jan 24, 2011
0helpful
1answer

Come risolvere iil problema

Disassemble fuser and inspect thermistor, thermostat and heat lamp. Replace broken part.
1/21/2011 7:41:38 PM • Samsung CLX... • Answered on Jan 21, 2011
0helpful
1answer

No display, klikking sound from relais and motor

I had the same thing happen to me, it turned out the the power supply failed. It is located on the right side of the printer. There was a capacitor that blew. After replacing the capacitor the printer started up just fine. You will need to remove the right panel and replace the capacitor. Hope this helps you.
1/6/2011 11:25:42 PM • Samsung CLX... • Answered on Jan 06, 2011
0helpful
1answer
0helpful
1answer

Draiver instller

kindly download the driver from this link,
http://www.samsung.com/uk/support/detail/supportPrdDetail.do?menu=SP01&prd_ia_cd=06010100&prd_mdl_cd=&prd_mdl_name=CLX-3160FN

Hope this helps. Please rate my response.
Thanks.
Have a good day.

12/17/2010 10:09:09 AM • Samsung CLX... • Answered on Dec 17, 2010
0helpful
1answer

I have a Samsung CLX-316N multi function colour

Dear This is the Quality issue.
can be solved by replacing black developer in imaging unit.(better solution)
Alternate is change the Imaging unit(costly solution).
12/9/2010 3:42:47 PM • Samsung CLX... • Answered on Dec 09, 2010
0helpful
1answer

The red fuser roller is damaged due to a paper

If the problem is limited to the heat roller only and the pressure roller is undamaged, it can be replaced. The part number is JC6601078A and it can be found at www.partstore.com. Hope this helps you.
12/7/2010 1:10:59 AM • Samsung CLX... • Answered on Dec 07, 2010
0helpful
1answer

The glass on my samsung clx3160fn has fogged up on

I don,t really know to well this model but with some patience and screw drivers start by take apart the top of the printer scanner.If you are lucky to do it you can access the bottom of the glass.
12/6/2010 5:15:22 AM • Samsung CLX... • Answered on Dec 06, 2010
0helpful
1answer

The red fuser roller in

You have to buy a new fuser unit. They have it at these sites:


http://www.facsimile.com/main/supplies/machine_id/101134/Samsung+CLX-3160FN+Fax+Machine+Toner+Drum.html


$102.15 Samsung CLX-3160FN Samsung Genuine Brand New Fuser Unit
Fuser Unit Good for Approx. 100,000 Mono Copies or 50,000 Color Copies (JC96-04088B


http://www.amatteroffax.com/itempagey_invid_1383681_d_samsung-imaging-kit-clp-300.html
I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309
12/3/2010 4:18:58 AM • Samsung CLX... • Answered on Dec 03, 2010
0helpful
1answer

How can i order the transfer belt for a samsung

The part number is JC96-03611C. Though it might be difficult to find at a local store, you can find it online. Places like facsimile.com or printerbuddy.com stocks it.

After you remove the old one and replace it with a new one. The replace transfer belt error message will not go away until you clear the transfer belt count on your machine. To do this, you will need to follow the steps below.

1. Enter Tech Mode by pressing [MENU] [#] [1] [9] [3] [4]
2. If you do not see the Tech Mode menu press the menu button again. (You need to enter the key sequence quickly.)
3. Select Tech Menu
4. Select DataSetup
5. Arrow to Clear Counts and press OK
6. Enter Password 1934
7. Arrow to Transfer Belt and press OK.


Hope this helps you.



12/2/2010 10:24:32 PM • Samsung CLX... • Answered on Dec 02, 2010
Not finding what you are looking for?
Samsung CLX 3160fn All-In-One Printer Logo

565 questions posted

Ask a Question

Usually answered in minutes!

Top Samsung Office Equipment & Supplies Experts

Cindy Wells

Level 3 Expert

6304 Answers

The Knight
The Knight

Level 3 Expert

76703 Answers

WTF Chuck.....
WTF Chuck.....

Level 3 Expert

388 Answers

Are you a Samsung Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Samsung Office Equipment & Supplies

  • Samsung Office Equipment & Supplies

Most Popular Question

clean glass samsung clx 3160fn

  • Office Equipment & Supplies
Loading...