20 Most Recent Samsung CLX 3160fn All-In-One Printer - Page 7 Questions & Answers

0helpful
1answer

Wont recieve or send faxes

Please repost and tell us what exactly happens when you try to send and/or receive faxes. If you can explain the problem we will do our best to offer you a solution.

Thanks!
8/17/2011 3:13:00 AM • Samsung CLX... • Answered on Aug 17, 2011
0answers
0helpful
1answer

I bought replacement toner cartridges

Are Refilled cartridge??? A cartridge problems.
Cartridge bad remanufactured.

Replace it for new originals cartridges.
7/8/2011 12:21:53 PM • Samsung CLX... • Answered on Jul 08, 2011
0helpful
1answer

Scanner locked

Please try the following steps:-

Unplug the power cable from the All in One
Wait for 5 minutes
Plug in the power cable back again.
Turn it on - Try this steps 2-3 time if the issue still persists take it to the Samsung Repair shop
7/6/2011 7:24:00 AM • Samsung CLX... • Answered on Jul 06, 2011
0helpful
2answers

Deve home sensor error

This can be fixed by stretching out a solenoid spring on the power cord side of the printer. The solenoid acts as a clutch to stop the spinning developer actuator at the right spot.

Open up the right side (power cord side) of the printer (take off top cover, then take off side cover). Then, find a solenoid (little metal square) that touches the white plastic vertical spur gear. Take the spring off the solenoid. Now, put the spring back on - only this time you will attach one anchor point to the middle of the spring as to pre-stretch the spring for more tension.

The problem is that the spring gets weak over time / the cogs round out over time and the solenoid finger is overcome by the spinning cogs, and resulting in selecting the wrong developer.

05b7f3b.jpg

More pictures of the solenoid on Facebook:
http://www.facebook.com/#!/photo.php?pid=55779771&id=2257206&fbid=10100154259704133
6/17/2011 3:21:37 PM • Samsung CLX... • Answered on Jun 17, 2011
0helpful
1answer

Cant hit Menu, theres only

Hi,
Welcome to Fixya. Can you please provide a brief description of the problem so that we cna provide you a solution on how to fix it.
Thanks
6/15/2011 9:07:59 PM • Samsung CLX... • Answered on Jun 15, 2011
0helpful
2answers

Transfer belt error on Samsung

Yes, I fixed the problem. Send me $19.95 and I will tell you.
6/5/2011 3:36:49 AM • Samsung CLX... • Answered on Jun 05, 2011
0helpful
1answer

There is a paper piece

After you remove the 4 screws, there is a plastic bar on the left side. Grab the end of the bar and slide it inward. That should allow you to pull out the fuser. Hope this helps you.
6/3/2011 4:58:34 PM • Samsung CLX... • Answered on Jun 03, 2011
0helpful
1answer

What is the problem when

You will have to give the printer for servicing. Even I had the same problem.
5/25/2011 7:31:37 PM • Samsung CLX... • Answered on May 25, 2011
0helpful
1answer

What is an invalid black

It means that you black toner cardrige is not OK. This can be if you changed the cardrige and used a no name product, there are defectif chips on this cardriges.
5/24/2011 5:20:56 AM • Samsung CLX... • Answered on May 24, 2011
0helpful
1answer

My problem is the message

this can be a lot of malfunction, but try first to disconnect the printer from power for 10 minutes, then try, if this does not help open and close the front and rear cover to assure that the sensors are in function to print, last you can do deinstallate the drivers from your computer reboot it and installate them from the samsung CD new then reboot again and try, hope it work
5/18/2011 11:15:25 AM • Samsung CLX... • Answered on May 18, 2011
0helpful
1answer

CLX-3160fn Samsung's website is basically

Sometimes, searching on a manufacturer's website can be a frustrating experience. If you need repair service for a specific brand, try doing a Google search for an company authorized sales or repair center. More often than not you will come up with a solution that is local to your area as opposed to out of state.

In your case, Wisconsin Imaging Solutions Data Management Group is certified as a Samsung Authorized Sales, Service & Warranty Repair Center


The web address is: http://www.wisconsinimaging.com/repair.htm


Their phone number is : (262) 784-5000 or

you can email them at: [email protected]



Their location in Wisconsin:

17020 W Glendale Dr
New Berlin, WI 53151


I don't know where you are exactly located in Wisconsin but this is definitely closer than Georgia. I hope this is helpful to you. Thanks for using FixYa.
5/4/2011 11:56:44 PM • Samsung CLX... • Answered on May 04, 2011
0helpful
1answer

WHERE CAN I GET MANUEL

www.usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_mp_series/pixma_mp250
5/4/2011 6:30:19 PM • Samsung CLX... • Answered on May 04, 2011
0helpful
1answer

Why is it my print is not the same other side is

If it is printing with vertical fade areas like this image below:


slamfix_50.jpg The problem is with the developer in the imaging unit. The problem can be fixed by either replacing the imaging unit for $100+ or you can fix it yourself by cleaning the imaging unit. You will need simple hand tools and if you are careful restore the print quality of your printer. I have a link to instructions that should help you http://www.fixya.com/support/r4120906-clean_developer_blades_samsung_clp_300 Hope this helps you.
4/23/2011 3:36:09 AM • Samsung CLX... • Answered on Apr 23, 2011
0helpful
1answer

Dev sensor error

If the error message persists after powercycling the printer, then it needs to be serviced.If you are able to work on printers try this:

Dev. Home error can be fixed by stretching out a solenoid spring on the power cord side of the printer. The solenoid acts as a clutch to stop the spinning developer actuator at the right spot.

The problem is that the spring gets weak over time / the cogs round out over time and the solenoid finger is overcome by the spinning cogs, and resulting in selecting the wrong developer.

Open up the right side (power cord side) of the printer (take off top cover, then take off side cover). Then, find a solenoid (little metal square) that touches the white plastic vertical spur gear. Take the spring off the solenoid. Now, put the spring back on - only this time you will attach one anchor point to the middle of the spring as to pre-stretch the spring for more tension.



05b7f3b.jpg
4/20/2011 4:56:35 AM • Samsung CLX... • Answered on Apr 20, 2011
0helpful
1answer

The machine says prepare transfer

it means that you will need to replace the transfer belt soon, the best to bring it to samsung to do so.
4/20/2011 4:21:22 AM • Samsung CLX... • Answered on Apr 20, 2011
0helpful
1answer

Do u have to replace

remove the waist toner container, then stick it in a small plastic bag so your hand is just half way in the bag and clos the bag with your other hand (the waist toner can okur cancer, so be carfully do not touch your face befor washed your hands twice) the carfully empty the waist toner into the bag after close the bag and throw it a way direct, clean the rest of the toner on the tank with an soft paper tissue and bring the tank bac in the printer. NOW wash your hands!!! then use you printer it will be as new.
4/19/2011 8:41:37 AM • Samsung CLX... • Answered on Apr 19, 2011
0helpful
1answer

Samsung 3160 error message: Dram_Func.c 58R wer

open your front cover, uninstall the wast toner tank and carfully empty it in a plastic bag (try to avoid to brease the dust, it cos cancer) switch of the power on the back side of the printer, now you see a Green handle on the lower end under the color cardriges, pull the handle up slightly and remove the drum, check it by fewing do not touch the drum with your fingers if there is some rest of paper some where on it and remove the paper if there is some carfully, then push the drum bac in and close the front cover, now try to print.
4/14/2011 9:31:45 AM • Samsung CLX... • Answered on Apr 14, 2011
0helpful
1answer

My samsung clx 3160fn prints

There is some-thing that is dirty that is making contact with the paper.

My guess is a roller or a little metal guide wheel or the like.

Clean it with tissue paper.

Use the already printed page to line up to see where about the source of the line is comming from.

Till next time!
damnor01
4/14/2011 9:31:15 AM • Samsung CLX... • Answered on Apr 14, 2011
Not finding what you are looking for?
Samsung CLX 3160fn All-In-One Printer Logo

565 questions posted

Ask a Question

Usually answered in minutes!

Top Samsung Office Equipment & Supplies Experts

Cindy Wells

Level 3 Expert

6358 Answers

The Knight
The Knight

Level 3 Expert

76763 Answers

Tom Chichester

Level 3 Expert

62168 Answers

Are you a Samsung Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Samsung Office Equipment & Supplies

  • Samsung Office Equipment & Supplies

Most Popular Question

clean glass samsung clx 3160fn

  • Office Equipment & Supplies
Loading...