20 Most Recent Apple MacBook PC Notebook Questions & Answers

do you usually lean or put any pressure on the area above the slot-load optical drive? If you have anything flat and plastic around 1/4" (about 1/2 the width as a USB plug) stick it in the optical drive until you just feel it going past the door, and rotate 90 degrees so it opens it a little. See attached photos if you aren't sure what I am talking about

Hope this helps. Got it right off my mac! good luck!
If you don’t remember your administrator password, you can reset it using the Mac OS X Install disc.
IMPORTANT: Because a user with the Mac OS X Install disc can gain unrestricted access to your computer, you should keep the disc in a safe place.
To reset the administrator password using the Mac OS X Install disc: Insert the Mac OS X Install disc and restart the computer.
NOTE: If you are using Remote Install Mac OS X, make sure your computer is set up for remote installation, and then go to step 3.
Using Remote Install Mac OS X When you hear the startup tone, press and hold down the C key until you see the spinning gear.
In the Installer, choose Utilities > Reset Password.
Follow the onscreen instructions to change the password.
You should change your keychain password in Keychain Access to match your new account password so your keychain is unloced when you log in.

i think your mac's CD/DVD writer is damaged that is why it's not working. get to your nearest customer care. Only they can help you out. https://crumbles.co/showbox-apk-download/

replace the cd unit to fix the fault the cost will be a new unit plus 1 hour labour charges so get quotes from different computer shops

Take it easy!Here are some avaiable methods for you:Measures 1: Bypass Windows 7 Password with Fingerprint LogonAs this method, Windows 7 provides native support for fingerprint biometric devices through Windows Biometric Framework (WBF). Of course, the premise is that your laptop or computer has a biometric sensor.Measures 2: Bypass Windows 7 Password with An Installation DiscAs we known, the System Recovery Options, provided by computer manufacturer, offers Windows installation disc or the recovery options which can help you reset Windows 7 password. Now, create an installation disc by yourself.Step 1. Enter system repair disc into the search box in the Start menu, and then click Create a system repair disc.Step 2. Insert a blank CD/DVD into the optical drive and click Create disc. Step 3: When you lost your password, insert the repair disk and restart your computer. For a moment, the System Recovery Options is displayed, choose Startup Repair and click Next-Next then it will remove the password automatically. Measures 3: Bypass Windows 7 Password with Reliable Password Recovery ToolkitThere are various Windows password recovery tools. Take two kinds of widespread toolkit for your reference. Ophcrack(500M) Ophcrack is one of the most popular free Windows password cracker based on rainbow tables. It can help you reset Windows password less than 14 characters. Once you forgot Windows 7 password, it is a good choice to download the version compatible with Window 7. However, many Windows users failed to recover Windows password as its large ISO file which is more than 496MB. Download:http://ophcrack.sourceforge.net/download.php Windows Password Rescuer(34.3M) Windows Password Rescuer is a highly appreciated Windows password recovery toolkit, especially designed for novice or new beginners. With this tool, you can get instant access to locked computer without the old password and computer skills. Prepare a bootable CD/DVD or USB flash drive and follow these 4 steps with less than 5 minutes.Step 1: Download Windows Password Rescuer Professional and install it in any available computerStep 2: Burn a bootable CD/DVD or USB flash driveStep 3: BIOS settings of your locked computer to make it boot from CD/DVD or USB flash driveStep 4: Reset Windows 7 password successfully Download: http://www.daossoft.com/download.html

If you do not have a music player app on the computer, you need to load one. If one is present, check to make sure it is working properly.

The DVD works by just pushing it in far enough till you get resistance, then the drive pulls the DVD in by itself. If after it pulls the DVD in, it just ejects it, The DVD drive thinks you are using an incompatible disk. You can also try resetting the SMC. This is how to reset SMC on most modern Mac laptops: Shutdown your MacBook Air / MacBook Pro Connect the power adapter to your Mac On the MacBook/Pro's keyboard, hold down the Shift+Control+Option keys and the Power button at the same time Release all keys and the power button at the same time Boot your Mac as usual Here's the key sequence to hold down: Reset the SMC of a MacBook Air or Retina MacBook Pro Do keep in mind that by resetting the SMC you will lose power specific settings, like the time it takes to sleep a Mac and other customizations to power settings. No big deal, but if you have made many changes to your hardware behavior you will want to adjust stuff like sleep behavior again. Reset SMC of an iMac, Mac Pro, Mac Mini Resetting SMC is different for non-portable Macs: Shut down your Mac Disconnect the power cord Press and hold the Mac's power button for 5 seconds Release the button Reattach the power cables and boot the Mac as usual Reset the SMC of a MacBook or MacBook Pro's with detachable batteries sad mac reset the smc Older MacBook laptops with a removable battery can reset SMC with the following approach: Shutdown the MacBook/Pro and remove the battery Disconnect the power adapter, hold the Power Key for 10 seconds Release the power key and reconnect your battery and power adapter Turn your Mac on Let boot as usual Hopefully that will clear up your problems, if not it might be worth a visit to the Apple Store or a certified repair center. Happy New Year, Kerry

Might be a simple fix... have you tried holding down the mouse when you startup your computer? That is the "Eject Disc on Startup" function. If so and it didn't work, let me know.

Try: http://macs.about.com/od/Troubleshooting/qt/How-To-Reset-An-Administrator-Accounts-Password-In-Os-X.htm

if u have problem inlogin password in win xp then when u power up pressF8 key to login in safe mode.
then clik on administrator
then reset your password.
but if u have bios passwqord problem then u have to rset your bios settings.

You are experiencing RSS (random shutdown syndrome). This seems to often be due to overheating but there are other factors. Read this article http://support.apple.com/kb/HT1237 and see if a firmware update is available for your laptop. This will often cure your very issue.

OK, I will give you a complete tutorial so that you can understand how to back your account with different ways so read this http://support.apple.com/kb/HT5787 and need more help related to your account follow Apple ID Support .

you'll have to provide proof of ownership/purchase with apple. It requires a boot disk or knowledge of command line for a third-party individual.

use the eject key, above delete on the right side of the keyboard.

top left of the keyboard, about the delete (backspace) key

What is wrong? Did you forget your password? Or the login name? or did you have a crash? Did you reinstall something? Or did a "funny" guy just change your password and forgot to tell you? Don't panic, Apple should be able to help you if you have an apple account, and you have that password.

Make sure that the power cord is plugged into a working outlet, that the prong section is connected with a clean contact to the brick, that the magsafe connector and port are both clean. Remove the battery. Now power on the laptop with the power button.If this does not work, attempt to reset the NVRAM (http://support.apple.com/kb/HT1379). If this is still not working, you can disassemble the machine and remove the upper part of the bottom case (lifting the keyboard section, and try to reseat the keyboard connection to the logic board. This cable is what allows the power button to turn on the machine. If this fails to fix it, then you have either a bad i/o board, or a bad system board, or a bad power cord.

If you're getting blocking, you might want to try SMC fan controller to get your machine cooled down. If you're just missing a section of the screen displaying, it might be a faulty LCD screen or a loose connection. Check that the ribbon is fitted correctly. After re-seating the cable, if it is still a problem, then the LCD is probably bad.