20 Most Recent
Canon PowerShot A570 IS Digital Camera - Page 2 Questions & Answers
Imac won't recognize camera
Try NOT connecting your camera to your computer.The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or you can use iPhoto or any other photo cataloging program.
Error de objetivo reiniciar camara
El origen de este error se encuentra en el mecanismo del zoom.
Existe una corona de reduccion o engranje de doble corona que hace la
rotacion del mecanismo del zoom, que al forzarce se le desprenden unos
dientes (plasticos) y comienza a patinar en el lugar Esto pasa también
cuando se cruza el lente de zoom,cuando se rompe una o mas guias ,lo
cual ocasiona que los sensores de foco y demas no logren su propia
calibración y es ahí cuando la maquina te envia ese mensaje.
Similar problema se presenta en varias marcas y modelos, por lo que aqui puede obtener mayores detalles (con videos incluidos):
Lens Error when turn cameraSuerte (recuerde calificar esta respuesta).
Card locked message on a570is
Solution: I had a similar problem with another camera: no matter what position of the lock on the card was, the camera kept saying "card locked". I got the card out and looked inside the space where the card resided. There's a small pin there that is responsible for sensing the lock on the card. Sometimes the pin gets "tired" and you have to raise it a little bit: just try to straighten it up with a clip or a nail.After I did it, the problem was solved.
Canon Powershot A570 IS Problem- Photos deleted when new folder was created?
I would seek professional advice, there is recovery software out there that are very good, you have tried two, if there is any chance to recover more you need to talk to someone that is experienced in these matters. Best buys may be able to help and worth a try, a camera repair store would be another option.
Camera says new batteries are dead
I found out how to fix it. (STEP 1.) Take out all of the batteries. (STEP 2.) Hold down the power button for 30 seconds. (STEP 3.) Put the batteries back in and you should be all set.
I have canon powershot A570
According to the symptoms I feel the batteries are low. In this case the camera switches on, lens comes out, understands there is not enough battery power to proceed, retract the lens and switches off.
If the batteries are too low, the next time you switch it on, it will ask you to enter the date.
Just replace the batteries and see.
Let us know the result.
(If I were you, I wouldn't have let the camera dry itself when wet with salt water. When water evaporates, salt will be left on the surfaces, which might explain why the lens stuck the first time).
Wish you best of luck! And thanks for using FixYa!
(And vote me if you find this useful).
Where can i download the
You don't need any special software.
The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.
Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or, despite what I said first, you can use any photo cataloging program, such as iPhoto, Windows Photo Gallery, or Picasa ( http://picasa.google.com ).
For fully charged NI Mi batteries 2700mA, when I
how much time between shots is it? ususally there is a 3 minute none use shut down timer or warning light. so if it is more than 3 minutes from the time you take one picture to the next picture then that might be your problem. also these new digital cameras have all kinds of sensors built into them now. they have motion and face and distance and light and image sensors in them that use your battery. also the new 3d digital cameras have even more sensors. the memory card also uses the battery as well but you digital camera won't work without it though. some flashes add-ons may you the battery. almost forgot about the lens, they also use the battery as well. the use it in the "auto focus" and with the power zooming. so if you are moving around allot and zooming the focus in/out allot then this uses the battery as well. try to do as many shots as you can in three minutes as you can then power off the camera and when not in use this may extend the battery life.
also chargers have a 12 to 24 hour charge time while others are fast chargers and may only have a few hours of charge time called quick chargers. some chargers have lights that indicate charge or charge complete see your charger's user's guide for this.
also check the contacts on the battery itself and make sure that they are clean and shiny because dirty contacts leads to not working well or charging properly.
How can i get a
You can download the manual and more from the manufacturer's web site at
http://www.usa.canon.com/cusa/support/consumer/digital_cameras/powershot_a_series/powershot_a570_is#BrochuresAndManuals
http://www.usa.canon.com/cusa/
support/consumer/digital_cameras/
powershot_a_series/powershot_a570_is#BrochuresAndManuals
Not finding what you are looking for?