20 Most Recent Sony Cyber-shot DSC-N2 Digital Camera Questions & Answers

https://www.amazon.com/Sony-Cybershot-DSC-N2-Digital-Optical/.../B000DZKNM2 try the link for buying it online

how to transfer picturesd from digital camera to pc just watch video

poor contact in the circuit under the button. you may need to replace the circuit. contact sony and ask for the part number

I have had success with this camera recovery software... Download the program http://www.asoftech.com/apr/You have to use a card reader either on your computer or an external USB card reader. Put the card in the card reader, open the recovery program, then select the drive where files are deleted, then press "Start" and wait for it to do it's magic.

Use a separate card reader to download the pics.

Touch "MENU", touch the toolbox-2 icon, then touch the "A" icon.

I suggest to check in the cyber-shot-dsc-n2 user manual in the section about image resolution (taking pics).Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.Thank you for using FixYa, have a nice day.

Consider NOT connecting your camera to your computer.

The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.

Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or you can use any photo cataloging program, such as Picasa ( http://picasa.google.com ).

DSC N2 :The switch off switch on and "Accessing" message with the beeping was so annoying. As the lens came out, I held it in place and turned the camera off, I could feel the motoor pulling (three times ) and gently resisted the retraction. the camera turned off with the lens out. When I turned it on the problem was resolved (hopefully permanently). €z

The camera is not connecting to the laptop as there are some errors. If there is any drivers installed please remove them and then reinstall the drivers from Sony support.
Then connect the camera as it will be detected and installed as a new hardware.
the folders will now open for view.

1) Remove SD Card.
2) Remove Battery.
3) Hold power button for 10 seconds.
4) Install Battery.
5) Attempt to power on.
6) If works, reinstall SD Card and you're ready to go!

Thanks and please rate if this helps you!

Hi,

Error: TURN THE POWER OFF AND ON AGAIN is displayed on the LCD screen when the Lens Mechanism is stuck or when affected by any malfunction. If turning the power on and off again does not resolve the error message, try doing a power reset and Initialize option.

Performing a manual power reset

Turn off the camera.

Remove the battery pack.

Press and hold the power button for 30 seconds.

Allow the camera to remain without power for 60 seconds.

Reinsert the battery pack.

Turn on the camera.

To reset the Camera back to factory default, select the INITIALIZE Option from the Setup 2 Menu of the Camera to OK.This will set the user defined settings back to factory default. The images and videos will not get deleted.

If the issue persists, service may be required.

Thanks for contacting FixYa.

burned out. call sony ask them to fix it since its defective.