20 Most Recent Acer AL2416W 24 in. LCD Television - Page 7 Questions & Answers

If you have forgotten your router password, the easiest thing to do is to reset your router to the factory default settings.To restore the router configuration to factory defaults, hold the reset button on the unit for 30 seconds.
Try this also:- u can recover it by simply connecting one of ur computer with the help of cable to router port 1, then open the browser and enter 192.168.1.1 in address bar .username ....... (blank)
password : admin
go to wireless ...then goto wireless security ... and there is ur security WPA key ...password.. make a not of it and try to connect it...
it would work without changing any personal settings...
Best luck try it out ..

hi there

Forgot Windows log in password

This sounds like this mouse may require drivers. Visit the mouse manufactures site and download and install the drivers. Best of luck to You :)

Ofcourse. If it has a audio video input socket then you can. If you do not have a AV socket in your television then you need to purchase an audio video to RF converter device. It costs somewhere around Rs. 300. Then you need a USB Cord which has an AV pin at the other end. It is also available for Rs. 50 - 70. You can then connect the Aspire to view images on to your TV.

hi,
do the following setup in ur remote
1. Turn on the device that you want to assign to a
mode key.
2. Press and hold the appropriate mode key (TV,
DVD, or AUX) on the remote, and then press and
hold the OK key.
3. Release both keys and the mode keys blink twice.
4. Enter the first 4-digit (1041,1192 any one first) setup code for the device using
the numeric keys (0-9) on the remote. The mode key
blinks three times to indicate that the code entry was
accepted.
Notes:
• When an invalid code is entered, the selected
mode key displays a long flash to indicate that
you have not entered the code correctly.
• Should the remote time out before you complete
the code setup, you must start over. This is
indicated by one long flash of the red LED.
5. Point the remote at the device, and press POWER
to test the device.
6. Did the device power off?
ok

this model is no longer available in market anymore.and therefore no branded new parts available.
but my friend told that price of screen grew up last days,at least more than 40$.as my idea is you better try on new model.you can find screen from your electronic goods dealer and i recommonded buy new model.you may repair this,but in future,parts may not available of all.before you buy new one,think twice is this model suitable for future,and how many years.
Thanks
i think this may help,if yes please accept,or not and ifyou need more,contact me again.
good luck

Hi


Thanks for using FixYa. Hope you already know that this cannot be corrected through the MENU options. To resolve this issue you’ll have to open the back of the unit and check the inverter board which is the power supply source for the backlights. The issue can be a bad inverter board and/or the inverter board is not getting 20vdc from the power supply maybe due to the connector that has gone bad/loose.All this is only recommended to be done by someone who has electrical expertise and knows about the internal circuitry of the unit. Please do accept the solution if the issue is resolved or post a comment for further assistance.


Thanks
Rylee

You have a bad oscilater. Please have tech replace

Power supply. Try replacing it. It is modular.

I have had the exact same problem. After doing some research, I learned that previous to the DTV transition, several television stations broadcasted in the VHF band. A VHF signal had more of an ability to travel around trees and mountains and, therefore, was received easily by television antennas. However, after the DTV transition, many stations moved to the UHF band which is "terrain limited," meaning it can't go around trees, mountains, etc. So, if you live near a large hill or have lots of trees nearby, you may lose a signal. Unfortunately, there is not much you can do about this. If you originally used "bunny ears" or another type of indoor antenna, you can improve your reception with a rooftop antenna. If you already have one and still don't get all the stations you used to (like me), then there isn't anything you can do except maybe making your antenna taller. I suggest you contact a professional that works with antennas and ask him what he may be able to do. I wish you the best of luck! Sincerely, Der Strom

That depends on the type of your card reader: if when you connect it to the laptop you only get a single drive letter assigned to it (not as many letters as there are sockets), than no, you can only use a single card at a time.

If it has to be round rather than a standard pc/monitor power cable, your best bet is going to be contacting the manfacturer. You might find a replacement at some place like radio shack or a local computer store but from the sound of it, it's not going to be something carried by many places if any.

http://www.geeks.com/details.asp?invtid=API-652&cat=CCD

something similar?

hauppauge