20 Most Recent Casio EXILIM Card EX-S770 Digital Camera - Page 7 Questions & Answers

Clean your connecting areas with alcohol . If that dont work . It could be a bad battery

There was a recall on the batteries. Call customer support and they will send you a new one for free.

Move the slide switch on the side of the card.

Hi Dear,

To set the flash. There is one button on the back side or on top of the camera(to located this button go through your user manual supplied with the camera). Using that button you can select the flash.

There is three option while selecting it :

1. Always on. When you select it the flash will be triggered when ever yo click a picture, No matter it is day light or at night.

2. Always off. In this the flash will not be triggered at any time.

3. Automatic. When you select this, the flash will be triggered automatically when ever the inbuilt sensor detects there is a need for one.

Hope this will help to solve your issue.

If you need more info on this please do write to us again.

Have a nice day.

ISO has to do with the speed of the film (or sensitivity of the semiconductor in a digital camera)    fuzziness has to do with weather you focused     If you had a closeup of a flower for instance  different parts of the flower would be in or out of focus if that is what you desire  or if the sensor adjusts automatically for one part or another   To keep the background and the foreground both in focus you need to have the smallest aperture possible to simulate a pinhole camera (increases depth of field)   if your white balance is wrong your picture will be too white or blue etc  that can be readjusted in a 'lightroom' (digital photography software equivalent to a darkroom)

Hi,
This problem is related to the memory card which you are using in your camera,which has corrupted. Change the memory card and your pics will be fine.
Thanks for using fixya.

the memory card should have a small switch on the upper left side it slides from lock to unlock if this doesnt work Look in the card slot - there may be a small bit sticking out over where the card's locking switch would fit when the card's inserted

This is due to a jammed or stuck motor inside or it can be a bad motor first what you do is turn the unit off the push gently in on the lens and I do mean if it gives you no play stop and take it in for a jammed or burned motor inside. Do not push hard if it does not play or give way then stop!! This is due to moister or sand or some thing got in unit or it was dropped or just given out. If you do not know what going on take it in you be glad you did this is a good camera. Please do leave feedback and postive ratings today
Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/edwy_1a56970cf1ea4620