Brother Multi-Function Center MFC-240C All-In-One InkJet Printer - Answered Questions & Fixed issues


Yes it works Thanks

Brother... | Answered on Mar 26, 2020 | 2,954 views


At this website www.reliable-store.com I found so much of information on how to repair vehicles and technical issues in detail.. Also complete, much better language, and they also have live assistance feature

Brother... | Answered on Mar 07, 2018 | 86 views


Hello,

The 36 error mean: The machine does not work due to a paper jam. Clear the paper jam, if doesn't work maybe a sensor is dirt or bad. To disassambly the printer you need the service manual and some know how ( electronics knowledge).

All the best !

Brother... | Answered on Feb 21, 2018 | 756 views


I use generic cartridges all the time in my brother printers with no problem. better to pay $2 per cartridge than whatever the brother brand ones cost!

Brother... | Answered on Nov 29, 2017 | 12,661 views


Yes, you can manually clean the printhead. I can't provide step by step instructions, but the print head is the piece that your ink cartridges go into. There is probably a lever that holds it locaked into place. You will want to take out the ink, then open the lever and remove the print head. Then clean where the ink cartridges sit, then gently clean any coppor contacts you see and then clean the print nozzles on the bottom of the print head. Do all of this with distilled water. Dry completely and re-install along with your ink.

If this doesn't solve the issue, you can buy replacement print heads.

Brother... | Answered on Nov 11, 2017 | 97 views


Common error of brother mfc/dcp printers.
Unfurtunately there is nothing what you can do.

Call brother hotline ask for service/guarantee repair.

Brother... | Answered on Oct 04, 2017 | 324 views


I have figured it out! I have a Brother MFC 240CN and I was having the same alignment problem and I followed the instructions from the printer prompt as well as the manual and it does not work.

So, this is what I did. I ran the alignment test print, then when it asked if it matches, I would say "No". And then I would pick number "8" to be the one that most closely matched "0" regardless if it did or not. I did this for the 600 and 1200dpi. Then when I ran the alignment test print again, it looked better! So I repeated it again and again picking "8" each time and it looked better with every test print. After about 4 or 5 tries, it looked normal again!

I hope everyone else with this problem will see this response and I hope it works too. I was getting so frustrated with this problem. Now I don't have to get it serviced or buy a new printer!

Brother... | Answered on Sep 23, 2018 | 10,752 views


Easy solution is to download drivers from the brother website. Takes just a few minutes and you should then be up and running or printing.

Brother... | Answered on Aug 19, 2017 | 66 views


Use bin and purchase new. Repair costs are high.

Brother... | Answered on Aug 02, 2017 | 53 views


have you thought of using avery envelope sticker sheets instead
http://www.averyproducts.com.au/avery/en_au/Products/Labels
you can also download templates to use in word to line up the printing to the stickers

Brother... | Answered on May 31, 2017 | 114 views


http://support.brother.com/g/b/faqend.aspx?c=gb&lang=en&prod=fax2440c_us_eu&faqid=faq00000168_003

Brother... | Answered on Nov 25, 2016 | 738 views


The connecting depends on several issues. This cant be said within a few words.
You have to read the manual which explains the very diffrent setting (see chap. fax). You can download the manual here:
www.brother.com (choose your country from landscape, choose your country, choose download&support)
Have a look at the faq, too.

If that doesnt help, plz call brother hotline of your country!

Brother... | Answered on Aug 25, 2016 | 238 views


Unplug the device for 5 minutes. Plug-in and see if difference

Brother... | Answered on Jul 03, 2016 | 2,185 views


I also had this problem, your solution was spot-on, remove the top cover and control panel and re-seat the encoded strip. simple.
boy, are you guys good.

Brother... | Answered on Aug 06, 2017 | 14,547 views


I have all pads removed but I having difficult time finding new pads, no local supplier here in London, Ontario,Canada, found one supplier in the United kingdom for £11.99/$30.00, not sure if this is reasonable cost, I also need the pad which is located at rear of ink cartridges. Any advice/direction wil gratefully appreciated, thanks, Mark.

p.s. I have a MFC-240c all in one brother printer

Brother... | Answered on Mar 22, 2016 | 1,777 views


check if plastic cover on ink cartridge . may need a lot of cleaning of print heads may need to get cleaning alcohol and a cloth and clean print head physically

Brother... | Answered on Dec 24, 2014 | 177 views


Download what you need from Brother website. No, not NAACP!

Brother... | Answered on Oct 14, 2014 | 50 views

Not finding what you are looking for?
Brother Multi-Function Center  MFC-240C All-In-One InkJet Printer Logo

942 questions posted

Ask a Question

Usually answered in minutes!

Top Brother Office Equipment & Supplies Experts

CheckitRight
CheckitRight

Level 3 Expert

1363 Answers

James Cagle
James Cagle

Level 2 Expert

482 Answers

Norman  J Weimar Jr
Norman J Weimar Jr

Level 3 Expert

6960 Answers

Are you a Brother Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...