This happened to me and I was able to fix it. I cracked it opened and found a bad capacitor, bought a replacement at Radio Shack and I'm back in business. Actually using it right now to post this.
-Jon

ViewSonic... | Answered on Oct 06, 2013

0 Answers

My Optiquest Q19wb monitor has recently been fixed

ViewSonic... | Posted on Sep 18, 2013 | Be the first to answer

1 Answer

Help desk

Check the directx if it's up-to-date or not. It might be the reason why you are having this issue. Or it could be that there is a driver that you need to update. To make sure that it's not a driver problem, I suggest that you scan your computer with RadarSync. It's a PC driver updater.

David

ViewSonic... | Answered on Jul 21, 2013

0 Answers

Manual for Optiquest Q9B-2 monitor model VS11201

ViewSonic... | Posted on Sep 25, 2012 | Be the first to answer

1 Answer

Q19wb Monitor Replacement Part Numbers Needed

Look on eBay for "Optiquest Q19wb repair" or "Optiquest Q19wb power"

This is a common failure mode. You can either buy a set of capacitors and solder them in, or buy a replacement power supply board if you cannot solder.

One eBay seller notes the power board as an ILPI-025, which is common among the following models:

Power Board ILPI-025 For LG W1934S & Viewsonic VG1930WM & Optiquest Q19WB & Acer AL1916W Ab etc
Model:ILPI-025 REV:E 79069140

ViewSonic... | Answered on Mar 08, 2012

1 Answer

Screen is white

Hello,

This type of problem is usually caused by a failure of the power supply board. The power supply puts out 5v and 12v to the electronics. If the power supply 5v side fails then the electronics does not get the right power but the back lights do so you get a white screen and no picture. The audio electronics are powered by a different power output. Here is a link to a repair guide for the Q19w that shows how to dis-assemble the unit and then which capacitors need to be replaced to revive the unit.

http://www.ccl-la.com/blog/index.php/how-to-repair-a-optiquest-q19wb-monitor/

I hope this helps, if so please rate my solution.

BuddyMc

ViewSonic... | Answered on Jan 01, 2012

0 Answers

I can't adjust the vertical geometry on my

ViewSonic... | Posted on Nov 06, 2011 | Be the first to answer

1 Answer

NO POWER TO THE MONITOR

Hello,

This is usually caused by a failure of the power supply board because of capacitor failure. The board is easily repairable if you can do a little soldering. Here is a a link to a page that shows how to open the monitor, remove the power supply board and what needs to be replaced to repair the unit.

http://www.ccl-la.com/blog/index.php/how-to-repair-a-optiquest-q19wb-monitor/

I hope this helps, if so please rate my solution.

BuddyMc

ViewSonic... | Answered on Sep 19, 2011

1 Answer

Vertial line in screen

Try reseating the rinbbon cable (on the LCD panel) between the LCD panel and the main board first, otherwise the worst case will be new LCD panel. You sjould also lok for any caps with domed/leaking tops.
See examples here:
http://s807.photobucket.com/albums/yy352/budm/LCD%20panel/

Basic LCD monitor and TV troubleshooting guide:
http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide
http://www.fixya.com/support/r6150077-basic_lcd_monitors_troubleshooting
http://www.fixya.com/support/r7406380-tv_training_manuals
Failed TV and Monitors pictures: http://s807.photobucket.com/albums/yy352/budm
Learn about bad caps: http://en.wikipedia.org/wiki/Capacitor_plague
Parts: www.shopjimmy.com
Parts: http://interliquidparts.com/

Capacitors kit: http://lcdalternatives.auctivacommerce.com/Default.aspx he can make you a set of caps.
Or www.digikey.com, just make sure to use caps with low ESR, 105c, high ripple current and long life rating such as PANASONIC FM or FC series.
Please post back what you find.

ViewSonic... | Answered on Jun 30, 2011

2 Answers

I cannot increase the volume and it is very low. I

I know this is an old post, but since it's the first Google result that shows up, here's the solution:

On the Q19wb press the '1' button, then use the arrow buttons to highlight "Audio Adjust" and press the '2' button to select. Then highlight and select "Volume" using the arrow keys and the '2' button. Then, adjust to a higher volume using the up arrow button.

Note: if you aren't getting any sould from your monitor follow similar steps above but select "Mute" and "Off" in the options.

ViewSonic... | Answered on Jun 10, 2011

1 Answer

My monitor all of a

it seems that this problem occurs because of faulty VGA card or may be your VGA adapter got damaged.if it is then replace your VGA adapter

ViewSonic... | Answered on Jun 01, 2011

1 Answer

I recently obtained a optiquest

When you get color casting on the screen (Red, Blue, or Green casting), it is either the pin on the video cable are bent or not insert properly, or broken cable inside the video cable, it can also be the video card/jack itself. You need to try this monitor with another PC first to find out where the problem is.

Basic LCD monitor and TV troubleshooting guide:
http://www.fixya.com/support/r6150077-basic_lcd_monitors_troubleshooting
http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide
http://www.fixya.com/support/r7406380-tv_training_manuals
Failed TV and Monitors pictures: http://s807.photobucket.com/albums/yy352/budm/

Learn about bad caps: http://en.wikipedia.org/wiki/Capacitor_plague

Capacitors kit: http://lcdalternatives.auctivacommerce.com/ he can make you a set of caps for you.
Or www.digikey.com just make sure to use caps with low ESR, 105c, high ripple current, long life rating such as PANASONIC FM or FC series.

ViewSonic... | Answered on May 22, 2011

1 Answer

How do I turn on

Hi,

Regarding your concern, just connect the audio cable from the LCD to your computer. The audio cable should also be connected to the audio port found at the back of the LCD.

I hope we fixed it. Thank you for visiting FixYa!

ViewSonic... | Answered on May 03, 2011

1 Answer

My optiquest Q19wb monitor has

Try unlocking it:
http://www.fixya.com/support/r4628438-aoc_monitor_lock_unlock_instructions

1) Press the MENU-button ( ) to activate the OSD window.

2) Press or to navigate through the functions. Once the desired function is highlighted, press the MENU-button to
activate sub-menu . Once the desired function is highlighted, press MENU-button to activate it.

3) Press or to change the settings of the selected function. Press or to select another function in sub-menu .
Press AUTO( ) to exit . If you want to adjust any other function, repeat steps 2-3.

4) OSD Lock Function: To lock the OSD, press and hold the MENU button while the monitor is off and then press power
button to turn the monitor on. To un-lock the OSD - press and hold the MENU button while the monitor is off and then
press power button to turn the monitor on.

5) Eco Mode hot key ( ) : Press the Eco key continuously to select the Eco mode of brightness when there is no OSD (
Eco mode hot key may not be available in all models).

6) Volume adjustment hot key : When there is no OSD , press Volume ( ) to active volume adjustment bar, press or
to adjust volume ( Only for the models with speakers).

ViewSonic... | Answered on Apr 17, 2011

1 Answer

Please help me my optiquest

The usual problem with this symptom is an CCFL power supply failure. The inverter is the board that powers the backlights so you can see what is on the screen. If you look really close and with a flashlight, you may be able to see the dark shadow of the image on the screen. Without the backlight, the LCD is useless.

You can get parts from places like http://www.lcdalternatives.com/ or eBay. Search for the model number and "repair" (e.g. "Optiquest Q19wb repair") on eBay.

ViewSonic... | Answered on Apr 12, 2011

Not finding what you are looking for?

Popular Tags

96 questions posted

Ask a Question

Usually answered in minutes!

Are you a ViewSonic Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Have a manual for ViewSonic Optiquest Q19wb LCD Monitor? Or just drag it here!

View Most Popular

Optiquest ViewSonic

Optiquest ViewSonic

no power monitor

Computers & Internet

20 Most Recent ViewSonic Optiquest Q19wb LCD Monitor Questions & Answers

Q20wb stopped working

Vga cable for a optiquest (viewsconic lcd monitor

My Viewsonic Q9B-2 monitor stays blank long when first turned on

After PC turned on, screen is black. Monitor light short time - green, then became orange. What's wrong?

I just bought a new power cord for my monitor and plugged it into my laptop and when i turn on the monitor it just flashes green and nothing appears on the screen.

Screen goes black,power light stays green. display only stays on a couple of seconds

My Optiquest Q19wb monitor has recently been fixed

Help desk

Manual for Optiquest Q9B-2 monitor model VS11201

Q19wb Monitor Replacement Part Numbers Needed

Screen is white

I can't adjust the vertical geometry on my

NO POWER TO THE MONITOR

Vertial line in screen

I cannot increase the volume and it is very low. I

My monitor all of a

I recently obtained a optiquest

How do I turn on

My optiquest Q19wb monitor has

Please help me my optiquest

Not finding what you are looking for?

Popular Tags

Ask a Question

Popular Products

ViewSonic Optiquest Q9b 19" Flat Panel LCD Monitor

ViewSonic Optiquest Q95 (Black) 19 in.CRT Conventional...

ViewSonic Optiquest V75 Monitor

ViewSonic Optiquest Q71B (Black) 17 in.CRT Conventional...

ViewSonic Optiquest Q53 (White) 15 in.CRT Conventional...

Check Out the Mobile Browsers Report

Top ViewSonic Computers & Internet Experts

Ekse

Cindy Wells

Dimitar Todorov

Are you a ViewSonic Computer and Internet Expert? Answer questions, earn points and help others

Manuals & User Guides

Optiquest ViewSonic

no power monitor