20 Most Recent Philips 42PF7220A 42 in. Plasma Television Questions & Answers

1 Answer

The tv menu keeps popping up and i have to use the remote to exit

did you get this to stop???

Philips... | Answered on Feb 19, 2019

0 Answers

No Picture and Red Blinking Light

I had this problem on a 42" Philips Ambilight. After reading in another forum, opened up the back, and found 2 leaking capacitors on the center circuit board (main power supply pc board) toward the bottom. Tops of the capacitors were bludged out (10v 3300uF) and leaking electrolytes. Unsoldered the old ones myself, went to Radio Shack. They were out, so order 12 on ebay for $6.63 including shipping. Resoldered and works fine. Can't do it yourself? Take the board out (just unhook the cables & unscrew it ), and take it to a computer shop or tv repair or someone who knows how to solder, and have them change them. Piece of cake!

Philips... | Answered on Jan 02, 2015

0 Answers

What could be done if an lg Tv model 29fg3rg-tg is not working what could be done?

Philips... | Posted on Jul 04, 2014 | Be the first to answer

1 Answer

How do you check fuses on a tv

You can check it using a multi-meter set to Ohms range.
Gopakumar Gopalan Google

Philips... | Answered on Apr 26, 2014

1 Answer

Panasonic plasma 2 blink

These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit stage inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power led, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating, to many popular brand TVs and other devices. Viewing it in "Mosaic" will make surf easy.
http://electronicshelponline.blogspot.com/
Blinking codes details to many popular brand TVs are given.

Philips... | Answered on Mar 02, 2014

1 Answer

42PF7320A/37

tengo linas verticales en toda la pamtalla causa de d5018 en borad lj92-01200a

Philips... | Answered on Jan 31, 2014

1 Answer

Hi I have a diode

vertcl lins

Philips... | Answered on Jan 31, 2014

1 Answer

TV does not power on. It does not blink any lights to show an error code. Simply put no power but only an electrical hum when plugged in.

take the back off! There is a fuse, see if its good. if so, sounds like the power supply.

Philips... | Answered on Jan 05, 2014

1 Answer

I have sound on my 55inch Philips television but

check VGA cable

Philips... | Answered on Sep 26, 2013

pdf Manual

42PF7220A 42 in. Plasma Television Manual

Philips Televison & Video | Uploaded on Sep 18, 2013

2 Answers

NO Picture and red light blinks 7 times.

I had the Same issue. on a 50PF9431D/37 set. Many Plasma Set's use a LJ44-00118A PS-505-PH Power supply from Samsung. Known to have this common problem. If you can, or have a friend that can Solder components?. Unplug your set remove the back panel & locate your power supply. It will be the PCB in the center of the set just above the Video/Audio connections. http://www.shopjimmy.com/power-supply-unit-lj44-00118a-from-philips-50mf231d-40.htm. Is a Link to a photo of the PCB. Make a note of the locations of all cable connections then unplug them all. Un-install PCB, Check all Fuse first. I believe their is 5 or 6 of them on the PCB. Then replace the two 3300uf 10v 105C Radial capacitors at C8060 & C8059. Look to see if the Caps are deformed and or split at the top. The location of the caps are in the Lower bottom edge of the PCB. A local shop may Carrie them if not, digi-key has them. Part # http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail&name=493-1754-ND. Total cost was $7 with S/H.

Philips... | Answered on May 29, 2013

0 Answers

Philips 42pf7220a/37 No picture but has sound

Philips... | Posted on Dec 05, 2012 | Be the first to answer

2 Answers

RED LIGHT BLINKS SEVEN TIMES

The most likely problem are two failed capacitors on the main board in the center of the TV The failed parts are easy to identify as the top of the cap will no longer be flat but will have bulged up. DO NOT attempt to remove the back of the TV unless you know what you are doing.
soldering on a circuit board will be required to fix this problem.

Philips... | Answered on Oct 24, 2012

0 Answers